Assembly Steps
Step
1:
Locating the legs
Unzip
bottom
cover under the
CHAIR
FRAME (A) to locate
legs
and
spacers.
---------
Step
2:
Attaching the legs
Turn
the
CHAIR
FRAME (A) on its
side
as
shown
on a non marring pad-
ded
surface.
Attach
LEG (C) with SPACER (D)
to
each
of
the
four corners
of
the
CHAIR
FRAME(A)
by hand turning
clockwise.
Make sure legs are tightly
turned
against
the chair bottom. The
sides
of
the two front legs should be
aligned with the front side
of
the chair.
After
all 4 legs have been installed,
turn
the
Chair
frame upright on its
feet.Assembly
process is complete.
Unscrew
LEGS (C) and SPACERS (D)
from
CHAIR FRAME (A). Close zipper.
_.--®
Page4
Care
& Maintenance
sss
(S)
o-
Do not put hot
items
directly
on
furniture
surface.
(S)
(S)
(S)
(S)
(S)
(S)
-
8
0
L
~
•••
*
•**
llliffil
~
~Q
~
~
Do not clean
furniture
with harsh cleansers
or
polish.
Do
not
place
furniture
in
direct
sunlight.
Do not
place furniture
near
heating
or
cooling vents.
Do not write on furniture
without
a padded barrier to
protect the surface.
Do not
place furniture outside.
For
indoor use only.
Not
for commercial use.
For
residental use only.
Dust and pick-up spills using a clean, non-colored,
lint-free cloth.
Stains may
be
removed with mild soap solution and
damp
cloth.
Page
5