Luxen Home WHIF633 is an electric fireplace heater mantel with a remote control, offering both ambiance and warmth to your home. Its flame effect can be adjusted for brightness, and it includes overheat protection for safety. With its heating settings, you can choose between low and high heat to suit your comfort level. The mantel design adds a touch of elegance to your living space while providing a convenient surface for displaying decor or personal items.
Luxen Home WHIF633 is an electric fireplace heater mantel with a remote control, offering both ambiance and warmth to your home. Its flame effect can be adjusted for brightness, and it includes overheat protection for safety. With its heating settings, you can choose between low and high heat to suit your comfort level. The mantel design adds a touch of elegance to your living space while providing a convenient surface for displaying decor or personal items.
- 0 -
Product Name:
PolyStone Roma Free Standing Electric Fireplace Heater Mantel with Remote
SKU #:
WHIF633
Instruction Manual
Please save this manual for future reference.
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
ELECTRIC FIREPLACE
SAVE THIS MANUAL
You will need this manual for safety instructions, operation procedures, and warranty. Put it and the original
invoice in a safe, dry place for future reference.
IMPORTANT SAFETY INSTRUCTIONS:
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,
electric shock and injury to persons including the following:
1. Read all instructions before using this appliance.
2. This appliance is hot when in use. To avoid burns, don’t let bare skin touch hot surfaces. The grill at the bottom of this
heater in particular will become hot when the heater is active. Keep combustible materials such as furniture, pillows,
bedding, papers, clothes and curtains etc. At least 3 feet (0.9m) away from the front of the appliance. Keep all items away
from the sides and back of the appliance and take special care not to block the air intake or exhaust vents. Use handles
when moving this heater.
3. Extreme caution is necessary when the appliance is used by or near children or invalids and whenever the heater is left
operating and unattended.
4. Do not operate the appliance if the power cord or plug has been damaged or the heater has been damaged or
malfunctioned in any way. Take the appliance to authorized service facility for examination, electrical or mechanical
adjustment or repair.
5. Do not use outdoors.
6. Do not use the appliance in bathrooms, laundry areas and similar indoor locations. Never locate the appliance where it
may fall into a bathtub or other water container.
7. Do not run the power cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not
route cord under furniture or appliances. Take care to position the cord away from high traffic areas and such that it can
not be tripped over.
8. To disconnect the appliance, turn all controls “OFF”, then remove the plug from the outlet.
9. This appliance has a polarized plug (one blade is wider than the other). This plug will fit in a fully in an outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does fit, contact a qualified electrician to install
the proper outlet. Do not change the plug in any way
10. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or
fire, or damage the appliance.
11. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces like a bed, where
openings may become blocked.
12. A heater has hot and arcing or sparking parts inside. Do not use in areas where gasoline, paint or flammable liquids are
used or stored.
13. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire,
electric shock or injury to persons.
14. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap.
15. Do not attempt burn wood or other materials in this heater
Warning: Any use of this appliance other than recommended by the manufacturer in this
user manual may cause fire, burns, electric shock and /or other serious injuries.
- 1 -
Product Name:
PolyStone Roma Free Standing Electric Fireplace Heater Mantel with Remote
SKU #:
WHIF633
Instruction Manual
Please save this manual for future reference.
16. When transporting or storing the heater, take care to keep both the unit and power cord/plug dry, free from excessive
vibration and away from heat sources.
17. This appliance comes equipped with an overheat protection safety device. Should the appliance begin to overheat for
any reason, it will automatically turn all heater functions of the appliance off. The appliance will have to be reset prior to
continuing use. To reset the overheat protection safety device, turn all controls, plug the appliance back and turn on.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
---------------------------------------------------------------------------------------
DIMENSIONS:
- 2 -
Product Name:
PolyStone Roma Free Standing Electric Fireplace Heater Mantel with Remote
SKU #:
WHIF633
Instruction Manual
Please save this manual for future reference.
TECHNICAL SPECIFICATIONS
Model#
EA0010
Rate Voltage
AC 120V, 60Hz
Rate Power (Total)
1400W
Power of Heating Apparatus
LOW/HIGH
Flame Power
80W
Motor Power
20W
Specification of the Bulb
2 pcs E12
ELECTRIC STOVE INSTALLATION
Plugging in the heater
NOTE:
1. This heater is for use on 120 Volts.
2. A 15AMP circuit is required to operate this appliance. If the breaker trips when the appliance is running, you may need to
move the appliance to another location or unplug other appliances that are on the same circuit
3. ADAPTERS ARE NOT ALLOWED CANADA
NOTE: A 15AMP,120 Volts circuit is required. Dedicated circuit is preferred but not essential in all cases, a dedicated circuit will
be required if, after installation, the circuit breaker trips or the fuse blows on a regular basis when the heater is operating.
Additional appliance on the same circuit may exceed the current rating of the circuit break.
- 3 -
Product Name:
PolyStone Roma Free Standing Electric Fireplace Heater Mantel with Remote
SKU #:
WHIF633
Instruction Manual
Please save this manual for future reference.
1. Ensure the power cord is not installed so that it is pinched or against a sharp edge and ensure that the power cord is
stored or secured to avoid tripping or snagging to reduce the risk of fire, electric shock or injury to persons.
2. Construction and electrical outlet wiring must comply with local building codes and other applicable regulations to
reduce the risk of fire, electric shock and injury to persons.
3. Do not attempt to wire your own new outlets or circuits. To reduce the risk of fire, electric shock or injury to persons,
always use a licensed electrician.
BEFORE USING THIS APPLIANCE:
1. Please check the circuit break for this appliance is on.
2. Light bulbs may become loose during shipping, if the flame effect is dim or does not operate properly at first, ensure that
the light bulbs are properly secured in the sockets (bulbs should be finger tight, don’t over tighter) see “Replacing Light
Bulb” section of this manual for instructions.
3. The information regarding this appliance can be found on the rating plate located on the back of the unit
PLUGGING IN THE HEATER:
1. Make sure the appliance main “I/O” is switch OFF (refer to operating instruction section)
2. Plug the unit into a no less 15Amp/120V outlet.
WARNING:
- 4 -
Product Name:
PolyStone Roma Free Standing Electric Fireplace Heater Mantel with Remote
SKU #:
WHIF633
Instruction Manual
Please save this manual for future reference.
NOTE:
OPERATING INSTRUCTIONS
1. When you first turn the heater on, it may emit a slight but harmless odor. This odor results from certain oils or greases
being heated as the appliance is used for the first time. This odor is perfectly safe and will stop shortly, it will not reoccur
after the first operation of the appliance.
Control Panel
- 5 -
Product Name:
PolyStone Roma Free Standing Electric Fireplace Heater Mantel with Remote
SKU #:
WHIF633
Instruction Manual
Please save this manual for future reference.
“
Using the Control Panel:
Master Power Switch(A)
Open the cover and push button A down (1) to “on” position. (see FIG A)
FLAME EFFECT
Push “ON/OFF” (On/Off) button (B) or “ON/OFF” (On/Off) button (M) on the remote control to begin flame effect. The red
power light ” and dimmer light “ ” will automatically come on. The flame effect can be adjusted by pressing the dimmer
“ ” button (C) or dimmer “ ” button (L) on the remote control. When pressed, the red light will blink and the flame effect
will cycle from high to low. Press the dimmer “ “ button (C) or dimmer “ “ button (L) on the remote control again to lock
in desired flame brightness. The red light “ “ will remain on. This brightness will be kept until the dimmer “ ” button (C)
or dimmer “ ” button (L) on the remote control is pressed again.
HEAT SETTING
1. Turning on Master Power Switch (A) and “ON/OFF” (On/Off) button (B) or “ON/OFF” button (M) on the remote control
2. Press “LOW” button (D) or “LOW” button (K) on the remote control to active the low heater setting. The red light above
will indicate that the heater is functioning on low.
3. Press “LOW” button (D) or “LOW” button (K) on the remote control again to shut off the heater.
4. Press “HIGH” button (E) or “HIGH” button (J) on the remote control to active the high heater setting. The red lights
above “LOW” and “HIGH” buttons will indicate that the heater is functioning on high.
5. Press “HIGH” button (E) or “HIGH” button (J) on the remote control again to shut off the heater.
Note
When the heater begins to work, it will give off cool air for about 10 seconds before the heating function is activated
- 6 -
Product Name:
PolyStone Roma Free Standing Electric Fireplace Heater Mantel with Remote
SKU #:
WHIF633
Instruction Manual
Please save this manual for future reference.
Using the Remote Control
This heater includes a remote control. To operate the appliance using the remote control, the Master Power Switch (A)
must be the “ON” position. See below for directions to use the remote control:
Note
When you first turn the heater on, it may emit a slight but harmless odor resulting from certain oils or greases being heated
as the appliance is used for the first time. This odor is perfectly safe and will stop shortly. It will not reoccur after the first
operation of this appliance.
This appliance comes equipped with an overheat protection safety device. Should the appliance begin to overheat for any
reason, it will automatically turn all heater functions of the appliance off. The appliance will have to be reset prior to
continuing use. To reset the overheat protection safety device, turn all controls off and unplug the appliance, wait 10
minutes, plug the appliance back in and turn on.
MAINTENANCE
Warning: Before attempting to perform any maintenance on this appliance, turn all controls to the
“OFF” position and unplug. Allow the appliance to be “OFF” For at least 10 minutes before performing
any maintenance in order to allow all components to cool properly.
- 7 -
Product Name:
PolyStone Roma Free Standing Electric Fireplace Heater Mantel with Remote
SKU #:
WHIF633
Instruction Manual
Please save this manual for future reference.
CLEANING
1. To remove dust from glass window, please use clean dry cloth.
2. To remove fingerprints or other marks from glass window, please use clean damp cloth. Do not spray glass cleaner or other
liquids directly onto the window.
3. Clean metal surfaces with a clean damp cloth making sure not to push dust or debris into any air intake or exhaust vents.
4. Do not use abrasive cleaners or spray liquids on any part of the appliance.
TROUBLE SHOOTING
FREQUENTLY ASKED QUESTIONS(FAQS)
PROBLEM
POSSIBLE CAUSE
SOLUTION
Flame is dim or not present
1. “Flame wand” has come loose from
bracket
1. Remove screws holding back panel
in place and remove back panel.
Secure end of “flame wand” back into
the support bracket.
No warm air is coming from the heater
1. The overheat protection device in
the appliance has been triggered
1. Turn all controls off, unplug the
appliance, allow to cool for at least 10
minutes, plug back in and restart.
The appliance turns off and will not
turn back on
1.
The overheat protection device in
the appliance has been triggered
2.
House circuit breaker has been
tripped.
1.
Turn all controls off, unplug the
appliance, allow to cool for at least 10
minutes, plug back in and restart.
2.
Reset house circuit breaker.
WARRANTY
Thank you for purchasing this product. These products have been made to demanding high quality standards and are guaranteed
for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect
your statutory rights.
For service within the warranty period, please contact the retailer where the product was purchased. Product model number
and proof of purchase are required for any service request. We reserve the right to repair or replace the defective product, as
its discretion.
Normal wear and tear, including accessory wear, it not covered under this warranty. The product is guaranteed for 12 months if
used for normal trade purpose, and is valid for the original buyer only. Any warranty is deemed invalid if the product has been
overloaded or used improperly, or subject to neglect or attempted repairs other than by an authorized agent. Heavy-duty, daily
professional or hire usage are not guaranteed. We are not responsible for any costs related to labor, injuries or any other loss
incurred during the product installation, repair or replacement, including any indirect or consequential damages
Due to continuous product improvement, we reserve the right to change the product specifications without prior notice.
Warning: Turn off the appliance, unplug and let cool for at least 10 minutes before attempting to
service. Only a qualified professional should attempt to service or repair the appliance
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Luxen Home WHIF633 is an electric fireplace heater mantel with a remote control, offering both ambiance and warmth to your home. Its flame effect can be adjusted for brightness, and it includes overheat protection for safety. With its heating settings, you can choose between low and high heat to suit your comfort level. The mantel design adds a touch of elegance to your living space while providing a convenient surface for displaying decor or personal items.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Estate Design EFPMH23JG User manual
-
GOOD & GRACIOUS 98047-OAK-HD Installation guide
-
Greystone WF2613R Owner's manual
-
Moda flame MFE5060WL User manual
-
allen EA0045RC User manual
-
SEI FA433300TX Assembly Instruction Manual
-
Camlink CL-ROMA300G Datasheet
-
Dynasty Fireplaces EF45D-FGF User manual
-
Canary Products HT9737SM User manual
-
