Kichler Lighting 49857BKT is a versatile lighting fixture that can be mounted indoors or outdoors, even in wet locations. It features a classic design with a traditional canopy, mounting strap, and lock-up knobs. The fixture is easy to install and comes with all the necessary hardware, including mounting screws, wire connectors, and a ground wire. The 49857BKT is compatible with a variety of bulb types, including incandescent, fluorescent, and LED, and it can be used to create a variety of lighting effects.
Kichler Lighting 49857BKT is a versatile lighting fixture that can be mounted indoors or outdoors, even in wet locations. It features a classic design with a traditional canopy, mounting strap, and lock-up knobs. The fixture is easy to install and comes with all the necessary hardware, including mounting screws, wire connectors, and a ground wire. The 49857BKT is compatible with a variety of bulb types, including incandescent, fluorescent, and LED, and it can be used to create a variety of lighting effects.
Date Issued: 07/25/17 IS-49857-US
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
A
B
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
CAUTION – RISK OF SHOCK – Disconnect Power at the main
circuit breaker panel or main fuse box before starting and during
the installation.
Before Installing:
All installations should comply with National and
local electrical codes. If you have any doubts concerning
installation, contact a qualified licensed electrician.
1) Find the appropriate threaded holes on mounting strap that
align with hole distance in canopy. Thread mounting screws
into threaded holes starting from outlet box side.
2) Attach mounting strap to outlet box with strap mounting
screws. Mounting strap can be adjusted to suit position of
fixture.
3) Grounding instructions: (See Illus. A or B)
A) On fixtures where mounting strap is provided with a
hole and two raise dimples. Wrap ground wire from
outlet box around green ground screw, and thread into
hole.
B) On fixtures where a cupped washer is provided. Put
ground wire from outlet box under cupped washer
and green ground screw and thread screw into hole in
mounting strap.
If fixture is provided with ground wire. Connect fixture
ground wire to outlet box ground wire with wire connector,
after following the above steps. Never connect ground wire
to black or white power supply wires.
4) Make wire connections. Reference chart below for correct
connections and wire accordingly.
5) Push fixture to wall carefully passing mounting screws with
holes in canopy. Make sure all wires are inside canopy and
do not get pinched between wall and canopy of fixture.
6) Thread lockup knobs onto mounting screws and tighten to
secure fixture to wall.
7) Insert recommended bulb(s). (Not supplied)
8) Raise the glass up through trim into fixture, passing over the
socket.
9) Turn glass to secure glass in place. (DO NOT over tighten)
10) Raise the lower trim over the glass and align the holes to pass
over the studs. Rest lower trim against the upper trim.
11) Slip a washer onto the stud, followed by threading on a finial.
Repeat for remaining studs. Tighten all finials to secure the
trim.
INSTRUCTIONS FOR MOUNTING
FIXTURE OUTDOORS AND/OR IN WET LOCATIONS:
1) Mounting surface should be clean, dry, flat and 1/4” larger
that the canopy on all sides. Any gaps between the
mounting surface and canopy exceeding 3/16” should be cor
rected as required.
2) With silicone caulking compound, caulk completely around
where back of canopy meets the wall surface to prevent water
from seeping into outlet box.
OUTLET BOX
CAJA DE SALIDA
WIRE
CONNECTORS
CONECTORES DE ALAMBRE
(2) STRAP MOUNTING SCREWS
TORNILLOS DE MONTAJE DE LA ABRAZADERA
MOUNTING STRAP
ABRAZADERA DE MONTAJE
MOUNTING SCREW
TORNILLO DE MONTAJE
FINIAL
CAPUCHÓN
WASHER
ARANDELA
LOWER TRIM
ADORNO INFERIOR
GLASS
VIDRIO
STUD
CLAVO
LOCK-UP KNOB
PERILLA DE SUJECIÓN
CANOPY
ESCUDETE
SOCKET
PORTALÁMPARAS
Page is loading ...
Date Issued: 07/25/17 IS-49857-CB
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
A
B
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth) *Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
CAUTION – RISK OF SHOCK – Disconnect Power at the main
circuit breaker panel or main fuse box before starting and during
the installation.
Before Installing:
All installations should comply with National and
local electrical codes. If you have any doubts concerning
installation, contact a qualified licensed electrician.
1) Find the appropriate threaded holes on mounting strap that
align with hole distance in canopy. Thread mounting screws
into threaded holes starting from outlet box side.
2) Attach mounting strap to outlet box with strap mounting
screws. Mounting strap can be adjusted to suit position of
fixture.
3) Grounding instructions: (See Illus. A or B)
A) On fixtures where mounting strap is provided with a
hole and two raise dimples. Wrap ground wire from
outlet box around green ground screw, and thread into
hole.
B) On fixtures where a cupped washer is provided. Put
ground wire from outlet box under cupped washer
and green ground screw and thread screw into hole in
mounting strap.
If fixture is provided with ground wire. Connect fixture
ground wire to outlet box ground wire with wire connector,
after following the above steps. Never connect ground wire
to black or white power supply wires.
4) Make wire connections. Reference chart below for correct
connections and wire accordingly.
5) Push fixture to wall carefully passing mounting screws with
holes in canopy. Make sure all wires are inside canopy and
do not get pinched between wall and canopy of fixture.
6) Thread lockup knobs onto mounting screws and tighten to
secure fixture to wall.
7) Insert recommended bulb(s). (Not supplied)
8) Raise the glass up through trim into fixture, passing over the
socket.
9) Turn glass to secure glass in place. (DO NOT over tighten)
10) Raise the lower trim over the glass and align the holes to pass
over the studs. Rest lower trim against the upper trim.
11) Slip a washer onto the stud, followed by threading on a finial.
Repeat for remaining studs. Tighten all finials to secure the
trim.
INSTRUCTIONS FOR MOUNTING
FIXTURE OUTDOORS AND/OR IN WET LOCATIONS:
1) Mounting surface should be clean, dry, flat and 1/4” larger
that the canopy on all sides. Any gaps between the
mounting surface and canopy exceeding 3/16” should be cor
rected as required.
2) With silicone caulking compound, caulk completely around
where back of canopy meets the wall surface to prevent water
from seeping into outlet box.
OUTLET BOX
BOÎTE À PRISES
WIRE
CONNECTORS
CONNECTEURS DE FIL
(2) STRAP MOUNTING SCREWS
VIS DE L'ÉTRIER DE MONTAGE
MOUNTING STRAP
ÉTRIER DE MONTAGE
MOUNTING SCREW
VIS DE MONTAGE
FINIAL
ORNEMENT
WASHER
RONDELLES
LOWER TRIM
MOULURE INFÉRIEUR
GLASS
VERRE
STUD
CLOU
LOCK-UP KNOB
BOULE DE BLOCAGE
CANOPY
COUVERCLE
SOCKET
DOUILLE
Page is loading ...
-
1
-
2
-
3
-
4
Kichler Lighting 49857BKT is a versatile lighting fixture that can be mounted indoors or outdoors, even in wet locations. It features a classic design with a traditional canopy, mounting strap, and lock-up knobs. The fixture is easy to install and comes with all the necessary hardware, including mounting screws, wire connectors, and a ground wire. The 49857BKT is compatible with a variety of bulb types, including incandescent, fluorescent, and LED, and it can be used to create a variety of lighting effects.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Kichler Lighting 42992OZLED User manual
-
Kichler Lighting 42992OZLED User manual
-
Kichler Lighting 45590AP User manual
-
Kichler Lighting 45195AVI User manual
-
Kichler Lighting 49192WZC User manual
-
Kichler Lighting 9707BK User manual
-
Kichler Lighting 45863CH User manual
-
Kichler Lighting 44091BK User manual
-
Kichler Lighting 49820BKT User manual
-
Kichler Lighting 44070DBK User manual
Other documents
-
Warehouse of Tiffany LD4039 Operating instructions
-
Sea gull lighting OL5900CB Installation guide
-
Kichler 45591AP Installation guide
-
Kichler 45926CLP User manual
-
Visual Comfort & Co ARN 4306G-FG Installation guide
-
Visual Comfort Studio ARN 4307BSL-FG Installation guide
-
Kichler 44085BK Installation guide
-
Kichler 44086NI Operating instructions
-
Kichler 49743WZCL18 Installation guide
-
Kichler 49917BK User manual