Southern Enterprises FA9031A0TX Installation guide

Page

1

For assistance with assembly, contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

[email protected]

www.seidal.com

FA9031A0TX / FA9031B0TX

Granville Media Fireplace

-Espresso/ Ebony Stain

Assembly Instructions

PO#

Page

2

1

Quantity

of 2

Side Shelf（L/R）

2

Quantity

of 2

Side Rail（L/R）

3

Quantity

of 2

Side Panel（L/R）

4

Quantity

of 2

Upper/Lower Rail

5

Quantity

of 1

Bottom Panel

6

Quantity

of 1

Shelf

7

Quantity

of 2

Upper Partition Panel

(L/R)

8

Quantity

of 1

Top Panel

9

Quantity

of 1

Middle Back Panel

10

Quantity

of 2

Side Back Panel（L/R）

11

Quantity

of 1

Fireplace Pedestal

12

Quantity

of 2

Fixed Bar

13

Quantity

of 1

Firebox

(Shipped In A Separate Carton)

A

Quantity

of 36

Cam Bolt

B

Quantity

of 40

Wood Dowel

C

Quantity

of 36

Cam Lock

Granville Media Fireplace- Espresso/ Ebony Stain

Parts List

Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded

surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.

Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.

Using the incorrect hardware will cause damage.

Page

3

D

Quantity

of 36

Plastic Cover

E

Quantity

of 4

Ø1/4*7/8"L

Small Bolt

F

Quantity

of 8

Spring Washer

G

Quantity

of 8

Flat Washer

H

Quantity

of 5

Ø3*12mm

Screw For Back

I

Quantity

of 7

Ø5/16”*1”L

Long Flat Head Screw

J

Quantity

of 1

Allen

Wrench

k

Quantity

of 4

Ø1/4*1-1/8"L

Long Bolt

L

Quantity

of 4

Bracket

M

Quantity

of 4

Screw For Bracket

N

Quantity

of 4

Screw For Wall

O

Quantity

of 2

Plastic Strap

P

Quantity

of 4

Plastic Anchor

Care and Cleaning Instructions:

Before using, wipe with a clean, dry cloth.

Periodically apply furniture wax to renew

the finish . Avoid rubbing or scratching the

surface with rough or abrasive objects.

For replacement parts or questions, please call

customer service at 1-800-633-5096.

Assembly Tool Required

No.2 Phillips Screwdriver

(Not Included)

Page

4

Figure 1

Insert cam locks (C) into holes on side rails

(2L/2R).

Screw cam bolts (A) into holes on side

panels (3L/3R).

Attach side rails (2L/2R) to side panels

(3L/3R) by inserting wood dowels (B) and

cam bolts (A) into corresponding holes until

side rails (2L/2R) and side panels (3L/3R)

meet.

Tighten by rotating cam locks (C) clockwise

with Phillips screwdriver.

Cover cam lock holes with plastic covers

(D).

Figure 2

Attach assembled units to side shelves

(1L/1R) by inserting wood dowels (B) into

corresponding holes until side shelves

(1L/1R) and assembled unit meet.

Use long bolts (K) through spring washers

(F) and flat washers (G) to connect

assembled units to side shelves (1L/1R).

Tighten long bolts (K) with Allen wrench (J).

Granville Media Fireplace- Espresso/ Ebony Stain

Assembly Instructions

(2)

(1)

"Please do not over tighten cam bolts,

stop when you feel them tighten"

Page

5

Figure 3

Attach assembled units to upper/lower rails

(4) by inserting 8 pcs wood dowels (B) into

corresponding holes until assembled units

and upper/lower rails (4) meet.

Figure 4

Insert cam locks (C) into holes on

assembled unit as shown in figure 4.

Screw cam bolts (A) into holes on bottom

panel (5).

Attach bottom panel (5) to assembled unit

by inserting wood dowels (B) and cam bolts

(A) into corresponding holes until

assembled unit and bottom panel (5) meet.

Tighten by rotating cam locks (C) clockwise

with Phillips screwdriver.

Cover cam lock holes with plastic covers

(D).

Page

6

Figure 5

Insert cam locks (C) into holes on

assembled unit as shown in figure 5.

Screw cam bolts (A) into holes on shelf (6).

Attach shelf (6) to assembled unit by

inserting wood dowels (B) and cam bolts (A)

into corresponding holes until assembled

unit and shelf (6) meet.

Tighten by rotating cam locks (C) clockwise

with Phillips screwdriver.

Cover cam lock holes with plastic covers

(D).

Figure 6

Insert cam locks (C) into holes on upper

partition panels (7R/7L) as shown in figure

6.

Screw cam bolts (A) into holes on shelf (6).

Attach upper partition panels (7R/7L) to

assembled unit by inserting wood dowels

(B) and cam bolts (A) into corresponding

holes until assembled unit and upper

partition panels (7R/7L) meet.

Tighten by rotating cam locks (C) clockwise

with Phillips screwdriver.

Cover cam lock holes with plastic covers

(D).

Page

7

Figure 7

Use screws (H) to connect middle back

panel (9) to assembled unit.

Tighten screws (H) with Phillips screwdriver.

Figure 8

Insert cam locks (C) into holes on

assembled unit.

Screw cam bolts (A) into holes on back

panels (10L/10R).

Attach back panels (10L/10R) to assembled

unit by inserting wood dowels (B) and cam

bolts (A) into corresponding holes until

assembled unit and back panels (10L/10R)

meet.

Tighten by rotating cam locks (C) clockwise

with Phillips screwdriver.

Cover cam lock holes with plastic covers

(D).

Use long bolts (E) through spring washers

(F) and flat washers (G) to connect back

panels (10L/10R) to assembled unit.

Tighten long bolts (E) with Allen wrench (J).

Page

8

Figure 9

Insert cam locks (C) into holes on

assembled unit.

Screw cam bolts (A) into top panel (8).

Attach top panel (8) to assembled unit by

inserting wood dowels (B) and cam bolts (A)

into corresponding holes until assembled

unit and top panel (8) meet.

Tighten by rotating cam locks (C) clockwise

with Phillips screwdriver.

Cover cam lock holes with plastic covers

(D).

Figure 10

Use long flat head screws (I) to connect

fireplace pedestal (11) to assembled unit.

Tighten screws (I) with Phillips screwdriver.

Page

9

Figure 11

Push firebox (13) into the back of the unit,

then, use long flat head screws (I) through

fixed bar (12) to lock tightly.

`

Figure 12

Use screws (M) to connect brackets (L) to

the back of the top panel (8) as shown.

Tighten screws (M) with phillips

screwdriver.

Drill 3/16 inch pilot holes in near

proximity of the brackets (L) attached to

the top panel (8) and tap the plastic

anchors (P) into wall.

Use screws (N) to connect brackets (L) to

plastic anchors (P) of wall.

Tighten screws (N) with Phillips screwdriver.

Move this item close to the fastened wall

brackets (L) and tie in both brackets (L) with

plastic starps (O) as shown in diagram.

Now your fireplace is ready to use.

Page

10

Please immediately examine this product carefully. Any request for missing parts or damage

replacement must be received within 90 days of your receipt of the product. Replacement, if available,

will be honored within this time frame. Parts will not be available for items arriving fully assembled. We

do not recommend modifying product(s) and we are not responsible for any damages due to product

modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are

under no obligation to provide parts or replacement merchandise.

Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri

Central time if you have product issues or email us at servi[email protected]. Please ask for customer

service representative for issues involving damages or replacement parts. Please ask for technical

assistance representative for any issues with product and assembly/construction.

Please contact the retailer that you purchased from for returns.

Customer Information

Name

Address

City/State/Zip Code

Phone Number

Please indicate where you purchased this item: Store/Website/Catalog

Please indicate color/size/style number:

Style No Parts Letter Parts Description Quantity Needed

Customer Service 1-800-633-5096

[email protected]

Southern Enterprises, Inc.

600 Freeport Parkway, Suite 200

Coppell, Texas 75019

Parts Replacement Form

Page

11

CAUTION

The top shelf is intended for a flat screen television with a maximum overall width of 50” and

supports up to 175 lb.

The top shelf is NOT INTENDED for tube televisions.

Each shelf should not be loaded with more than 10 lb.

DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the

maximum sizes and weights indicated may result in instability causing possible injury.

This unit contains a permanent warning sticker located on under side of top shelf or inside

drawer.

Model: FA9031A0TX and FA9031B0TX

Granville Media Fireplace

Southern Enterprises, Inc

600 Freeport Parkway,

Suite 200 Coppell, Texas, 75019

Manufacture Date: 6/2/2014

Southern Enterprises FA9031A0TX Installation guide

This manual is also suitable for

Southern Enterprises FA9031A0TX Installation guide

Related papers

Other documents