Bauhn AWEPM-0119 User manual

Brand: Bauhn

Model: AWEPM-0119

Category: Mobile headsets

Type: User manual

Bauhn AWEPM-0119 is a True Wireless Earbuds with a range of features to enjoy your favorite audio content.

With its Bluetooth® 4.2 technology, you can effortlessly connect the earbuds to your smartphone or other Bluetooth-enabled devices. The main unit (L) serves as the connection point to your mobile device, while both earbuds work in series connection.

Once paired, you can control audio playback, answer phone calls, and reject incoming calls using the Multi-Function Button on the main unit (L). The earbuds also support call waiting, allowing you to seamlessly switch between two calls.

Bauhn AWEPM-0119 is a True Wireless Earbuds with a range of features to enjoy your favorite audio content.

True Wireless Earbuds

Model number: AWEPM-0119

Getting Started

What’s included

Parts and functions

Pairing the earbuds

Charging the earbuds

1 Connect a Bluetooth

device

Press and hold the Multi Function Button on the

L unit for 4 seconds until the indicator flashes

green and red alternately.

Make sure that Bluetooth

is activated on your

mobile device. Look in the Bluetooth

device

list for ‘AWEPM-0119’ and connect your device

to the earbuds.

NOTE: Do not release the button when the indicator

is green only, as this will turn on the earbud, but does

not yet enter device pairing mode.

2 Auto pairing between Earbuds

Turn on the R unit (the indicator will flash

green) and the R unit will connect to the L unit

automatically.

3 Turn off the units

Press and hold the Multi Function Button on one

of the units for about 2 seconds and both units

will turn off.

TIPS: When the L unit cannot connect to R unit, try the

following to step to reconnect them:

1 Press the Multi Function Button on both L and R

earbuds at the same time. Hold for 4 seconds until

the indicator flashes green and red alternately.

• Put the earbuds into the charging dock,

properly aligning the charging connectors.

• The indicator will light red if the battery is

low on charge.

• When the earbuds are fully charged, the

indicator light will turn green.

• Press the battery status button to show

the remaining charge level of the charging

case (four lights means the battery is fully

charged).

Battery status indicator

Battery status button

1 x True Wireless Earbuds (pair)

1 x USB Charging Cable

1 x Small Ear Tips (pair)

1 x Medium Ear Tips (pair, installed on

earphones)

1 x Large Ear Tips (pair)

1 x Charging Carrying Case

1 LED Indicator

2 Multi Function

Button

3 Microphone

4 Earbud Tips

5 Charging Contacts

Charging the carrying case

Basic operation

• Charge the carrying case using the USB

cable at the back of the carrying case.

• The indicator will flash when the carrying

case is charging. The four lights show the

charging progress.

• Answer a phone call: Press the Multi

Function Button to answer an incoming call;

press it again to end the call.

• Reject a phone call: Hold the Multi Function

Button for 1 second to reject an incoming call.

NOTE: Only the main unit (L) is available to answer

a phone call; the R unit will be muted during phone

calls.

2 Double press on the L and R units at the same

time. The two units will connect with each other

after about 4-6 seconds. During pairing, the

indicator light will flash red and green alternately.

Once successfully paired, the indicator will quickly

flash green.

Call waiting

Power on

Power off

Earbud connectivity and playback

Technical specications

• Ensure that the call waiting function is

activated on your phone.

• When you are on a phone call and there

is another call incoming, double press

the Multi Function Button to answer the

second call.

• If you have two calls at the same time,

you can switch between them by double

pressing the Multi Function Button.

• Press the Multi Function Button for roughly

3 seconds. The indicator will light green.

• Hold the Multi Function Button on either

unit for about 2 seconds. Both units will

switch off simultaneously (the indicator light

will be red).

• You can also switch off the earbuds by

placing them into the charging dock.

• The two earbud units are in series

connection, while the main unit (L) is the

only unit that is connected to a mobile

device (i.e. smartphone).

• Use the Multi Function Button on the main

unit (L) or on your mobile device to control

audio playback, such as playing and

pausing songs. Use your mobile device to

control playing the previous or next song.

Precautions when using batteries

• Dispose of batteries promptly and properly follow any guidelines for

recycling and disposal of batteries that apply in your local area.

• Keep batteries away from children and pets.

• Never throw batteries into a fire or expose them to fire or other sources

of extreme heat.

• Do not carry or store batteries with other metallic objects. Doing so could

cause batteries to short-circuit, leak or explode.

• Do not attempt to disassemble batteries.

The Bluetooth

word mark and logos are registered trademarks owned by

Bluetooth SIG,Inc. and any use of such marks by Hands (IP) Holdings Pty

Ltd is under license. Other trademarks and trade names are those of their

respective owners.

Responsible disposal of the packaging

The packaging of the product has been selected from environmentally friendly

materials and can usually be recycled. Please ensure these are disposed of

correctly. Plastic wrapping can be a suffocation hazard for babies and young

children, please ensure all packaging materials are out of reach and are safely

disposed of. Please ensure they are offered for recycling rather than throwing

these materials away.

Responsible disposal of the product

At the end of its working life, do not throw this product out with your

household rubbish. An environmentally friendly method of disposal will ensure

that valuable raw materials can be recycled. Contact your local authority for

your nearest recycling centre. Electrical and electronic items contain materials

and substances which, if handled or disposed of incorrectly, could potentially

be hazardous to the environment and human health.

Climate

If moving the apparatus from one location to another, for example from a

cold environment to a warm one. Allow sufficient time for the apparatus to

acclimatise to the new location before switching on. In tropical climates keep

the air surrounding the unit sufficiently dry to avoid condensation forming.

This product complies with Australian Safety standard AS/NZS 60065 to ensure

the safety of the product.

IMPORTANT!

RISK OF HEARING DAMAGE

Never place the earbuds into ears BEFORE turning them on, as the sudden

volume may be too high and could cause hearing damage.

Keep the earbuds out of ears until you have turned down the volume. Test

this by playing the music and holding the earbuds near (but not IN) your ear,

as you turn the volume down.

Once the volume is turned down, you can then place the earbuds into ears

and gradually increase the volume to the desired level.

1300 886 649

Model: AWEPM-0119 Product Code: 64276 01/2019

www.tempo.org

AUS

The RCM is a visible indication of a product’s compliance with all

applicable ACMA regulatory arrangements, including all technical

and record-keeping requirements.

YEAR WARRANTY

Bluetooth

version 4.2

Earbud playback time Up to 2.5 hours (approx.)

Charging dock battery 3.7V 500mAh

Earbuds weight 9g (2 x 4.5g)

Total weight (including charging

dock and earbuds)

45g

Dimensions (L x D x H) 75 x 38 x 30mm

Bauhn AWEPM-0119 User manual

Brand: Bauhn

Model: AWEPM-0119

Category: Mobile headsets

Type: User manual

Bauhn AWEPM-0119 is a True Wireless Earbuds with a range of features to enjoy your favorite audio content.

Download PDF

report

Bauhn AWEPM-0119 User manual

Bauhn AWEPM-0119 User manual

Related papers

Other documents