iLuv
1 2 3
4
5
6
Power
Mode
Charge
Inspired in New York. Styled by iLuv
®
.Inspired in New York. Styled by iLuv
®
.
Aud
™
Air
WiFi and Bluetooth®
Portable Stereo Speaker
QSG
100%
1. Power on
1. “+”
• Click: Increase volume
1. Make sure it’s in Wi-Fi mode and Wi-Fi is connected
2. Set up pre-set number keys 1 to 6 number through the App
a. Search internet radio station
you want to pre-set
b. Click Pre-set button
on the right side of station list
c. Select number out of 1~6 for pre-set
1. Multi mode: Multiple Aud Airs play the same music
a. Open DEVICE LIST from app
b. Press and hold device panel and
drag towards another device
to pair devices
c. The mode is changed to Multi mode
d. Voice prompt: Play back synchronized
2. Solo mode: Each Aud Air plays independently
a. Press and hold device panel
and drag down past dotted line
b. The mode is changed to Single mode
3. Refer to ‘How to switch between solo and multi mode?’
1. Open DEVICE LIST from app
2. Set up Aud Air devices as multi mode
3. Click button to change
4. Select button to use
the unit as left side speaker
a. Voice prompt: Left Channel
5. Select button to use
the unit as right side speaker
a. Voice prompt: Right Channel
6. All units with will deliver left side sound of stereo and all units
with will deliver right side sound of stereo
1. Open DEVICE LIST from app
2. Click set up button
3. Select ‘Rename’ from the menu
4. Select preferred name or select
‘Custom’ for your own name
and click ‘Finish’ button
6. Device name is changed
3. Reset
a. Hold WPS (button image) button for 20 seconds
b. Voice prompt: Factory setting restoring
4. Open the app
3. Set up app within the range of 10 ft from Wi-Fi router
* Do not press and hold the WPS button as it may cause failure
of Wi-Fi connection
b. Turn on Bluetooth
• Bluetooth eective range : 33 ft (10 m)
• some service providers (i.e. Spotify) do not support pre-set function.
Pre-set button
Aux-in
Light will blink
1 2
Mode
3
4
5
6
Power
Mode
Charge
:02
“Ready”
“Good bye”
“Wi-Fi
searching”
a.
c.
1 2
Mode
3
4
5
6
Power
Mode
Charge
:03
iLuv
1 2 3
4
5
6
Power
Mode
Charge
b.
1. Click ‘Mode’ button to select Bluetooth
Light will be in solid red
Power LED (red) will be on
d. Default mode is Wi-Fi
Voice prompt: Wi-Fi Mode
Mode
a.
a. Mode light will blink in green
a. Mode light will be solid green
b. Voice prompt: Wi-Fi searching
“Wating”
c. Voice prompt: Waiting for connection
“Router
connected”
b. Voice prompt: Router connected
“Bluetooth Mode,
Bluetooth
Discovering”
b. Voice prompt: Bluetooth Mode,
Bluetooth Discovering
a. Go to settings
a. Voice prompt: Wi-Fi mode,
Chime bell, Router connected
c. Scan for and select 'iLuv Aud Air'
3. When Aud Air is paired, Mode light
will be solid blue.
1. Connect your mobile device
to Wi-Fi network
2. Download the free Aud Air app
from the app store
5. Wait for the chime bell sound,
the indicator of Wi-Fi search
(about 25 seconds).
a. If your Aud Air has been set up before, this page will go to ‘DEVICE LIST’
in about 20 seconds after chime bell sound.
7. Click the WPS (Wi-Fi Protected Setup)
button lightly on Aud Air
(0.5 seconds)
9. Enter password for Wi-Fi network
and press the ‘Connect’ button.
a. Wi-Fi will be connected in 10~20 seconds depending on the distance
from Wi-Fi router.
b. To set up the Wi-Fi network of your speaker system, please connect
your phone with router running at 2.4GHz band (for dual band router,
please connect with the router with SSID corresponding to 2.4GHz)
11. When it is failed, there is message ‘FAILED TO CONNECT WI-FI’
a. Select ‘Alternative Way to Set up’ button
b. Go to your phone’s Wi-Fi setting and
select your new Aud Air. Look for
the device name you see
on the product.
c. Come back to this app
d. Select ‘Next’ menu
• Aud Air app
available at
8. Click the ‘Next’ button on the app.
10. Wi-Fi is connected
e. Please select network to connect and
enter password of the Wi-Fi network
‘Done’ button next
2. Set up from mobile device
“Pairing
successful”
iLuv
1 2
Mode
3
4
5
6
Power
Mode
Charge
b. Voice prompt: Pairing successful
1. Click ‘Mode’ button to select Aux in
2. Plug in Aux-in cable
1. Click ‘Mode’ button to select Wi-Fi
2. Mode light will be solid green when Wi-Fi is connected
1 2
Mode
3
4
5
6
Power
Mode
Charge
a. Mode light will blink in yellow
1 2
Mode
3
4
5
6
Power
Mode
Charge
a. Mode light will be solid yellow
“Aux-in Mode”
“Router
connected”
b. Voice prompt: Aux-in Mode
• Hold: Next track (only for songs in mobile device)
2. “ - ”
• Click: Decrease volume
• Hold: Previous track (only for songs in mobile device)
3. Press number key to play the pre-set playlist
Stereo set up with multiple Aud Air devices
• For charging
your Aud Air.
Does not sync.
Pre-set
iLuv
1 2
Mode
3
4
5
6
Power
Mode
Charge
:20
a. Refer to initial set up in the case
iLuv
1 2 3
4
5
6
Power
Mode
Charge
1
iLuv Aud Click 2 Quick start guide
