Hooker 638-85091 Assembly Instructions

ASSEMBLY INSTRUCTION

Item#: 638-85091 Ravenna Console

** Please make sure you have all parts indicated below prior to assembly.

Diagram 1

Diagram 2

Assembly Steps:

1. Place console top upside down on a soft surface to prevent from being scratched.

2. Attach the end of stretcher to left and right legs, insert the cap with bolt into holes of legs and

stretcher, secure tightly by screwing in.(see diagram 1).

3. Attach assembled base to top using bolts (B), lock washers (C), flat washers (D) and secure all

bolts with allen wrench (A) in a clockwise direction (see Diagram 2).

4. Turn the console upright.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.

Polish the finish with soft cloth and an industry recognized furniture polish.