Page is loading ...
Attach ends of lower A.
handle to handle
brackets with notch
in handle pointing
downward towards the
ground.
Secure using the B.
hairpins clips, carriage
screws, and wing nuts.
Lift upper A.
handle to
extended
position.
Carefully slip A.
starter rope
into rope
guide.
Tighten rope B.
guide wing
knob.
Slide hose into A.
adapter.
Pull pin and align B.
with first hole in
hose. Release pin
to lock hose.
Snap hose A.
handle into
upper bracket
and then into
lower bracket.
Star Knobs
Upper Handle
Starter Rope
Handle
Lower
Handle
Bag
Locking
Rod
Starter
Rope
Rope
Guide
Hose
Adapter
Hose
Handle
A
A
A
B
778-11826B© 2010 24A-060
Tighten star B.
knobs.
B
B
B
A
A
B
B
Rest hose B.
in curved end
of hose handle.
A
B
C
C
Pull out the A.
locking rod
and hold it.
Position bag on B.
unit. Release
locking rod.
Secure the bag C.
to the handle.
1
4
2
5
3
6
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
Gas Cap
Throttle
Control
Choke
Control
Oil Fill
Fill fuel tank with clean, fresh
gasoline. Do not fill above the base
of fuel tank neck.
Move throttle control into the
Fast
position.
Pour the entire contents of the
oil bottle (included in carton)
into the oil fill.
Move the choke control
into the Choke
position.
Grasp starter rope handle
and pull with quick, full-arm stroke.
Note: Disregard a clanking noise coming
from the impeller housing; it’s normal.
When engine starts, slowly move choke
control into the Run
position.
778-11826B© 2010 24B-060
7
10
8
11
9
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
/