2. Generation Lighting
  3. 5576093S
5576093S

Generation Lighting 5576093S Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Generation Lighting 5576093S Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
Installation Instructions for
1.0
990C5_76093S-VIT
5576093S, 5676093S, 5776093S
Vitus Flush Mount
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes.
This product is safety listed for damp locations.
Incandescent version may be dimmed with a standard incandescent dimmer.
LED LEDversion may be dimmed with a dimmer. Consult lamp manufacturer
for additional information.
This instruction shows a typical installation.
CAUTION RISK OF FIRE-
This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved.
Use minimum 90°c supply conductors.
7400 Linder Ave, Skokie, 160077IL
800.969.3347
www.generationlighting.com
© 2019 Generation Lighting.All rights reserved.
The "Generation Lighting" graphic is a registered trademark of
Generation Lighting. Generation Lighting reserves the right to
change specifications for product improvements without notification.
SAVETHESE INSTRUCTIONS!
Ceiling
2
1A
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base on to the mounting plate.
Insert the shade into the fixture base and secure in place with the locking tabs.
1
2
3
4
5
FIXTURE BASE
Install the Fixture
JUNCTION BOX
MOUNTING PLATE STUD
MOUNTING PLATE
3
4
6
SHADE
1
6
5
LOCKING TAB
/