Palm 3265WW User manual

Product End-of-Life Disassembly Instructions for Palm Ultralight Wireless Headset

Product Identification:

Marketing Name / Model Description

Palm Ultralight Wireless Headset

3265WW

Bluetooth headset

Only authorized recyclers are permitted to use these disassembly instructions. Any attempted

disassembly by a user or unauthorized party will void the product warranty and may irreparably damage

the product.

1.0 Tools Required

Tool Description Tool Size (if applicable)

Cutter pliers Medium

Long nose pliers Medium

Flat bladed screw driver Small

2.0 Product Disassembly Process

2.1 Listed below are the basic steps that should typically be followed to remove components and materials

requiring selective treatment:

1 Remove ‘switch button’ & all external plastics from ‘main housing’ of

headset (use long nose pliers)

Dispose of ‘plastics’ in accordance with local recycling laws

2 Remove ‘speaker assembly’ from ‘main housing’ of headset &

disassemble ‘speaker’ from plastic housing (use long nose pliers)

Dispose of ‘speaker’ & ‘plastics’ in accordance with local recycling

laws

3 Remove ‘PCB & Battery assembly’ from ‘main housing’ of headset

(use long nose pliers)

Dispose of ‘main housing’ plastics in accordance with local recycling

laws

4 Cut ‘battery’ leads and detach from ‘PCB’ (use cutter pliers)

Dispose of ‘battery’ & ‘PCB’ in accordance with local recycling laws

October 20, 2006

Download PDF