User Guide
Palm
®
Ultralight Wireless Headset
ii
Table of Contents
Palm® Ultralight Wireless Headset............................................... 1
Package contents ......................................................................... 2
Charging your headset ................................................................. 3
Pairing your headset with your Bluetooth smartphone ................ 7
Turning your headset on and off ................................................ 10
Wearing your headset on your left or right ear .......................... 11
Using your headset .................................................................... 15
Making a call .............................................................................. 16
Answering a call ......................................................................... 17
Using auto answer ..................................................................... 18
Muting a call............................................................................... 19
What do the colored flashes and tones mean? ......................... 20
Advanced features ..................................................................... 21
Common questions.................................................................... 22
Customer support for your headset........................................... 23
Caring for your headset.............................................................. 23
Glossary ..................................................................................... 24
Important battery safety information ......................................... 25
Product regulatory information .................................................. 26
Palm
®
ultralight wireless headset 1
Palm® Ultralight Wireless Headset
Palm
®
Ultralight Wireless Headset
Before getting started, please review the safety booklet included in your
package.
Thank you for purchasing the Palm
®
ultralight wireless headset. We hope you will
be delighted with its operation.
Please read this guide to get started and make the best use of your headset’s
many features.
Using a mobile phone while driving creates a distraction to
the driver, and this may increase the likelihood of an accident. When using the
phone while driving, keep conversations short and do not make notes or read
documents. Before answering calls, consider your circumstances. Pull off the
road and park before making or answering calls when driving conditions require
it—for example, bad weather, high traffic density, the presence of children in the
car, or difficult junctions or maneuvers. Always follow local laws.
What you’ll learn to do in this guide:
• Charge your headset and turn it on
• Switch between wearing your headset on your left or right ear
• Make, answer, and end a call
• Use the mute feature
• Use advanced features
Read the Glossary
at the end of this guide to familiarize yourself with
important terms.
IMPORTANT
[!]
NOTE
[*]
Package contents
2 Palm
®
ultralight wireless headset
Package contents
* Use only the charger provided with your Palm
®
Treo
TM
smartphone and the charging
adapter provided.
** This is a AAA battery-powered charger that can be used to recharge your headset.
*** Replace the battery with only a nonrechargeable AAA battery.
Storage
case
Charging
adapter*
Headset
carrying
pocket
Headset with a
built-in rechargeable
battery
Indicator light
Call control button
Microphone
Battery
charger**
AAA
battery***
Small,
medium,
and large
soft-gel
ear tips
Earloop
Volume/DSP/mute
button
Battery
holder
Palm
®
ultralight wireless headset 3
Charging your headset
Charging your headset
Your headset contains a rechargeable battery that you must fully charge before
using it for the first time. You can use your fully charged headset for up to three
hours before it needs to be recharged.
There are two ways you can charge your headset:
With the AC charger provided with your Treo smartphone The charging adapter
included with your headset works only with the AC charger provided with your
Treo smartphone or replacement Palm branded AC charger, which can be
purchased separately.
Using another AC charger may damage or destroy your
headset and can void the warranty on the product.
With the AAA battery charger provided with your headset When you use the
AAA battery-powered charger to charge your headset, you can get two full
charges from a new AAA battery.
Charging the headset for three hours provides a full charge, charging it for an
hour provides a minimum charge. You must charge your headset for the full three
hours before using it the first time.
IMPORTANT
[!]
Charging your headset
4 Palm
®
ultralight wireless headset
Using your Treo smartphone’s AC charger
0
You are now ready to pair your headset and your smartphone. If your headset has
already been paired with your phone, you can begin using the headset
immediately.
1
Connect the AC charger to the
charging adapter at the base of
your headset carrying pocket
and plug it into a wall outlet.
2
Insert your headset into the
headset carrying pocket. The
indicator light remains red
while your headset is charging.
3
Charge for three hours for a full
charge, and then remove the
AC charger from the headset
carrying pocket. The indicator
light turns off when your
headset is fully charged.
2
1
3
Palm
®
ultralight wireless headset 5
Charging your headset
Using the AAA battery–powered charger
0
1
Twist the bottom of the AAA battery–powered charger slightly
counterclockwise and remove the battery holder.
2
Insert the AAA battery into the holder, slide the battery holder back
into the battery charger, and turn the battery holder slightly clockwise.
See the figure that appears next to Step 4.
Make sure you do not use a rechargeable battery.
3
With the shirt clip facing you, separate the charging adapter from your
headset carrying pocket by grasping both attachments and gently
bending the outsides forward so that the components snap apart. Do
not twist the components.
IMPORTANT
[!]
Charging your headset
6 Palm
®
ultralight wireless headset
One AAA battery should be able to completely recharge your headset twice
before you need to replace it. When your headset is fully charged, the red light
turns off.
4
Line up the opening on the battery
charger with the shirt clip on the
headset carrying pocket, and push
the battery charger into the headset
carrying pocket until it snaps into place.
5
Insert your headset into the headset carrying pocket. See the figure
that appears next to Step 4.
This is done
in Step 5 below.
Headset carrying
pocket
Battery charger
This is done
in Step 2 above.
This is done
in this step.
Palm
®
ultralight wireless headset 7
Pairing your headset with your Bluetooth smartphone
Pairing your headset with your Bluetooth smartphone
Pairing, also known as forming a partnership, creates a unique and encrypted
wireless link between two devices enabled with Bluetooth
®
wireless technology,
such as your Treo smartphone and your Palm ultralight wireless headset.
If pairing is successful, the indicator light flashes blue every five seconds.
Your headset must be turned off before you begin the pairing
process. If it is on, see Turning your headset on and off
to learn how to turn it off.
Pairing with your Treo smartphone (Palm OS
®
versions)
0
1
Make sure your headset is off, and then press and hold the Call control
button until the headset indicator light alternately flashes red and blue.
2
On your smartphone, press Applications and select Bluetooth , or
tap the Bluetooth icon at the top of the screen.
3
Make sure the Bluetooth setting is on.
4
Select Setup Devices, and then select Hands-free Setup.
5
Select Next. When the smartphone finds your headset, it displays
“Palm Ultralight” with a headphone icon next to it. Select Palm
Ultralight, and then select OK.
NOTE
[*]
Pairing your headset with your Bluetooth smartphone
8 Palm
®
ultralight wireless headset
Pairing with your Treo smartphone (Windows Mobile versions)
0
6
A status message appears, telling you that your smartphone is
connecting with your headset. When your smartphone asks for a
passkey, enter 0000, and then select OK.
7
If the Device Select screen appears, select Headset and select Next.
8
On the confirmation screen, select Done.
1
Make sure your headset is off, and then press and hold the Call control
button until the headset indicator light alternately flashes red and blue.
2
On your smartphone, go to the Today screen and tap Bluetooth .
3
Check the Turn on Bluetooth box if it is not already checked.
4
Select the Devices tab, and then select New Partnership. When the
smartphone finds your headset, it displays “Palm Ultralight” with a
headphone icon next to it. Select Palm Ultralight, and then select Next.
5
When your smartphone asks for a passkey, enter 0000, and then select
Next.
Palm
®
ultralight wireless headset 9
Pairing your headset with your Bluetooth smartphone
Pairing with other Bluetooth phones
0
6
Check the Hands Free box if it is not already checked, and then select
Finish. Select OK.
1
Make sure your headset is off, and then press and hold the Call control
button until the headset indicator light alternately flashes red and blue.
2
Set your Bluetooth phone to discover your headset by following your
phone’s instruction guide. Typically, the steps involve going to a setup,
connect, or Bluetooth menu on your phone and then selecting the
option to discover a Bluetooth device.
3
When your phone finds your Palm ultralight wireless headset, a
message appears asking if you want to pair; select Ye s or OK.
4
When a message on your phone screen asks for a passkey, enter 0000,
and then select Ye s or OK.
Turning your headset on and off
10 Palm
®
ultralight wireless headset
Turning your headset on and off
0
When you turn your headset on, after a brief delay, the indicator light displays
one of the following charge levels:
• Three red flashes = greater than 2/3 battery charge
• Two red flashes = 1/3 to 2/3 battery charge
• One red flash = less than 1/3 battery charge
1
Turn on your headset by pressing and
holding the Call control button until the
indicator light glows blue. If you are
wearing your headset, you will hear a
series of ascending tones when the
power turns on. The indicator light
flashes blue every 5 seconds when the
power is on.
2
Turn off your headset by pressing and
holding the Call control button until the
indicator light glows red or until you hear
a series of descending tones. The
indicator light remains unlit when the
power is off.
Palm
®
ultralight wireless headset 11
Wearing your headset on your left or right ear
Wearing your headset on your left or right ear
Your headset comes with three soft-gel ear tips and an optional earloop.
Inserting a soft-gel ear tip
0
1
Select the ear tip size that fits the most comfortably in your ear.
2
Hold the ear tip with the elongated
edge pointing down, and push the
post into the opening on your
headset. This is the neutral position.
Wearing your headset on your left or right ear
12 Palm
®
ultralight wireless headset
3
With the ear tip facing you, twist the tip toward the R for right-ear
wearing or toward the L for left-ear wearing.
4
To remove the ear tip, make sure it’s in the neutral position and then
pull it away from your headset.
Neutral
position
Right ear
Left ear
Palm
®
ultralight wireless headset 13
Wearing your headset on your left or right ear
0
Using the earloop
You can attach the earloop to your headset to improve stability.
0
For optimal performance, wear your headset
and your Bluetooth phone on the same side of your body.
In general, you will get better performance when there are
no obstructions (including parts of your body) between
your headset and the phone.
As you move away from your smartphone, the audio
quality may degrade. When the connection drops between
the devices, you will hear a beep in your headset. When
you go out of range, only the power off function will
operate.
1
Remove the ear tip from your headset by turning it to the neutral
position and pulling it away from your headset.
NOTE
[*]
Wearing your headset on your left or right ear
14 Palm
®
ultralight wireless headset
2
Attach the earloop between your headset and the ear tip, and replace
the ear tip. For the right ear, the earloop appears as shown in the
following figure. For the left ear, reverse the orientation. The ear tip
should rest against, but not enter, the ear canal.
to fit over the right ear.
This earloop is positioned
Palm
®
ultralight wireless headset 15
Using your headset
Using your headset
Your headset uses a digital signal processor (DSP) to reduce background noise.
By default, DSP noise reduction is on. However, if you want to enable the power-
saving mode by turning off DSP noise reduction, simultaneously press both sides
of the Volume button before you make a call. Press the button until you hear two
descending tones. To reenable DSP noise reduction, repeat the procedure for
turning off DSP noise reduction and you should hear two ascending tones.
When you turn off your headset, the DSP noise reduction setting is cleared. DSP
noise reduction is reenabled the next time you turn it on.
If you press both sides of the Volume button at the same time while
on a call, you activate the mute setting, which mutes your voice to the other
person.
For your comfort, health, and safety, do not exceed moderate
volume levels.
Volume
button
NOTE
[*]
IMPORTANT
[!]
Making a call
16 Palm
®
ultralight wireless headset
Making a call
0
1
Make sure your headset is on.
2
Dial the number on your smartphone. The call is automatically
transferred to your headset, and you hear a series of tones.
You can also Use voice-activated dialing
, if your phone and wireless
plan support it
3
Increase or decrease the call volume by pressing the top or the bottom
of the Volume button . The volume of the confirmation tone
you hear increases or decreases to match the call volume.
4
To end a call, press and release the Call control button, or use the
controls on your smartphone to end the call. A short beep sounds to
confirm that the call has ended.
Use only short presses when making, ending, or
answering a call, to avoid accidentally activating your headset’s
Advanced features
.
IMPORTANT
[!]
Palm
®
ultralight wireless headset 17
Answering a call
Answering a call
0
1
Make sure your headset is on.
2
Answer a call:
From your headset When you hear your headset ring, press and
release the Call control button. You cannot answer a call from the
headset until the headset begins ringing.
From your phone Press the button on your phone to answer the call
as you normally would.
On a Treo smartphone, the call is automatically transferred to your
headset. For other phones, you may need to press and release the Call
control button to transfer the call to your headset.
3
Increase or decrease the call volume by
pressing the top or the bottom of the Volume
button . The volume of the
confirmation tone you hear increases or
decreases to match the call volume.
Using auto answer
18 Palm
®
ultralight wireless headset
If you miss a call, the indicator light on your headset flashes blue and purple
every six seconds to alert you about the missed call. To clear this alert, press the
Call control button.
When your headset has been paired with your phone and you make
or answer a call on your phone while your headset is turned off (or is out of range
of the phone), your headset automatically tries to connect to the call if you turn it
on (or bring it back into range of your phone). If your headset does not
automatically connect to the call in this case, quickly press the Call control button
to connect.
Using auto answer
If your headset is in the headset carrying pocket when it receives a call, the
carrying pocket vibrates.
• Remove your headset from the headset carrying pocket to automatically
answer the call.
• Return your headset to the headset carrying pocket to end the call.
4
To end the call, press and release the Call control button, or use the
controls on your smartphone to end the call. A short beep sounds to
confirm that the call has ended.
Use only short presses when ending or answering
a call to avoid accidentally activating your headset’s Advanced
features.
IMPORTANT
[!]
NOTE
[*]
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
