Netgear WNDR4500v3 Owner's manual

350 East Plumeria Drive

San Jose, CA 95134

USA

January 2015

202-11400-01

N900 WiFi Router

Model WNDR4500v3

User Manual

2

N900 WiFi Router

Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product and use it to register your product at

https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR

recommends registering your product through the NETGEAR website.

For product updates and web support, visit http://support.netgear.com.

Phone (US & Canada only): 1-888-NETGEAR.

Phone (Other Countries): Check the list of phone numbers at http://support.netgear.com/general/contact/default.aspx.

Trademarks

used for reference purposes only.

Compliance

For regulatory compliance information, visit http://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

3

Contents

Chapter 1 Hardware Setup

Unpack Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Position Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Cable Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 2 Connect to the Network and Access the Router

Connect to the Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Wired Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

WiFi Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Types of Logins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Use a Web Browser to Access the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

NETGEAR genie Automatic Internet Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Log In to the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Change the Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Access the Router with NETGEAR genie Apps. . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Chapter 3 Specify Your Internet Settings

Use the Internet Setup Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Manually Set Up the Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Specify an Internet Connection Without a Login. . . . . . . . . . . . . . . . . . . . . . . 22

Specify an Internet Connection That Uses a Login . . . . . . . . . . . . . . . . . . . . . 23

Specify IPv6 Internet Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Requirements for Entering IPv6 Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Use Auto Detect for an IPv6 Internet Connection. . . . . . . . . . . . . . . . . . . . . . 26

Use Auto Config for an IPv6 Internet Connection . . . . . . . . . . . . . . . . . . . . . . 28

Set Up an IPv6 6rd Tunnel Internet Connection. . . . . . . . . . . . . . . . . . . . . . . . 29

Set Up an IPv6 6to4 Tunnel Internet Connection . . . . . . . . . . . . . . . . . . . . . . 30

Set Up an IPv6 Pass Through Internet Connection. . . . . . . . . . . . . . . . . . . . . . . . 32

Set Up an IPv6 Fixed Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Set Up an IPv6 DHCP Internet Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Set Up an IPv6 PPPoE Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Change the MTU Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Chapter 4 Optimize Performance

Optimize Internet Gaming with Upstream QoS . . . . . . . . . . . . . . . . . . . . . . . . . . 41

4

N900 WiFi Router

Add QoS Rules by Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Add a QoS Rule by Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Edit a QoS Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Delete a QoS Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Delete All QoS Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Improve Network Connections with Universal Plug and Play. . . . . . . . . . . . . . . 46

Wi-Fi Multimedia Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Chapter 5 Control Access to the Internet

Set Up Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Allow or Block Access to Your Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Manage Network Access Control Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Use Keywords to Block Internet Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Delete Keywords from the Blocked List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Block Services from the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Schedule When to Block Internet Sites and Services. . . . . . . . . . . . . . . . . . . . . . 58

Avoid Blocking on a Trusted Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Set Up Security Event Email Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Chapter 6 Share a USB Storage Device Attached to the Router

USB Device Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Connect a USB Device to the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Access a Storage Device Connected to the Router . . . . . . . . . . . . . . . . . . . . . . . 64

Map a USB Device to a Windows Network Drive . . . . . . . . . . . . . . . . . . . . . . . . . 65

Back Up Windows Computers with ReadySHARE Vault. . . . . . . . . . . . . . . . . . . . 65

Back Up Mac Computers with Time Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Set Up a USB Hard Drive on a Mac. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Prepare to Back Up a Large Amount of Data . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Use Time Machine to Back Up onto a Storage Device. . . . . . . . . . . . . . . . . . . 67

Control Access to a Storage Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Play Media from a USB Drive on TiVo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Use FTP Within the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

View or Change Network Folders on a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Add a Network Folder on a Storage Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Edit a Network Folder on a Storage Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Use the Router as a ReadyDLNA Media Server. . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Approve USB Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Safely Remove a USB Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Chapter 7 Access Storage Devices Through the Internet

Access Storage Devices Through the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Set Up FTP Access Through the Internet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Access Storage Devices Through the Internet with FTP . . . . . . . . . . . . . . . . . 81

Download Files onto a USB Storage Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Download Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Change the Download Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

5

N900 WiFi Router

Manage Downloader Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Dynamic DNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Set Up a New Dynamic DNS Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Chapter 8 Share a USB Printer

Install the Printer Driver and Cable the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Download the ReadySHARE Printer Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Install the ReadySHARE Printer Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Use the Shared Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

View or Change the Status of a Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Use the Scan Feature of a Multifunction USB Printer . . . . . . . . . . . . . . . . . . . . . 91

Change NETGEAR USB Control Center Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Change the NETGEAR USB Control Center Language . . . . . . . . . . . . . . . . . . . 92

Specify the Time-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Chapter 9 Network Settings

View or Change WAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Set Up a Default DMZ Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Change the Router’s Device Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Change the LAN TCP/IP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Specify the IP Addresses That the Router Assigns . . . . . . . . . . . . . . . . . . . . . . . . 99

Disable the DHCP Server Feature in the Router . . . . . . . . . . . . . . . . . . . . . . . . . 100

Manage Reserved LAN IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Reserve an IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Edit a Reserved IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Delete a Reserved IP Address Entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Use the WPS Wizard for WiFi Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Specify Basic WiFi Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Change the WiFi Mbps Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Change the WiFi Password or Security Level . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Set Up a Guest WiFi Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Control the Wireless Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Use the WiFi On/Off Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Enable or Disable the Wireless Radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Set Up a Wireless Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Specify WPS Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Use the Router as a Wireless Access Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Set Up the Router in Bridge Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Chapter 10 Manage Your Network

Upgrade the Router Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Change the admin Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Recover the admin Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

View Router Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Display Internet Port Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Check the Internet Connection Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

6

N900 WiFi Router

View and Manage Logs of Router Activity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Monitor Internet Traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

Custom Static Routes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Set Up a Static Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

Edit a Static Route. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Delete a Static Route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

View Devices Currently on the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

Manage the Router Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Back Up Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Restore Configuration Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Erase the Current Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

Remote Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Chapter 11 Specify Internet Port Settings

Set Up Port Forwarding to a Local Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

Add a Custom Port Forwarding Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

Edit a Port Forwarding Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

Delete a Port Forwarding Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

Application Example: Make a Local Web Server Public . . . . . . . . . . . . . . . . . 139

How the Router Implements the Port Forwarding Rule . . . . . . . . . . . . . . . . 139

Set Up Port Triggering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Add a Port Triggering Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Disable Port Triggering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

Application Example: Port Triggering for Internet Relay Chat . . . . . . . . . . . 142

Chapter 12 Troubleshooting

Quick Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Sequence to Restart Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Check Ethernet Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Wireless Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Troubleshoot with the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Standard LED Behavior When the Router Is Powered On . . . . . . . . . . . . . . . 146

Power LED Is Off or Blinking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Power LED Stays Amber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

LEDs Never Turn Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Internet or Ethernet Port LEDs Are Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

WiFi LED Is Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Cannot Log In to the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Cannot Access the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Troubleshoot PPPoE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

Troubleshoot Internet Browsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Changes Not Saved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Wireless Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Troubleshoot Your Network Using the Ping Utility . . . . . . . . . . . . . . . . . . . . . . . 151

Test the LAN Path to Your Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

7

N900 WiFi Router

Test the Path from Your Computer to a Remote Device . . . . . . . . . . . . . . . . 152

Appendix A Supplemental Information

Factory Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

8

1

1. Hardware Setup

The N900 WiFi Router is compatible with the latest WiFi devices and is backward compatible

with 802.11 a/b/g and n devices. With simultaneous dual-band WiFi technology, the router offers

speeds up to 450 Mbps at 2.4 GHz and 450 Mbps at 5 GHz and avoids interference, ensuring

top WiFi speeds and reliable connections. You can also use the Gigabit Ethernet ports and USB

port to connect local devices.

This chapter contains the following sections:

• Unpack Your Router

• Front Panel

• Rear Panel

• Position Your Router

• Cable Your Router

For more information about the topics covered in this manual, visit the support website at

http://support.netgear.com.

Hardware Setup

9

N900 WiFi Router

Unpack Your Router

Your package contains the following items.

Router

Ethernet cable

Power adapter

(varies by region)

Figure 1. Package contents

Front Panel

The status LEDs, WPS button and WiFi On/Off button are located on the front panel.

USB port LEDs

Ethernet LAN port LEDs

5 GHz LED

2.4 GHz LED

Internet LED

Power LED

WPS button and LED

WiFi On/Off button

Figure 2. Router front panel

Hardware Setup

10

N900 WiFi Router

Pressing the WPS button lets you use WPS to join the WiFi network without typing the

WiFi password. See WiFi Connection on page 15.

Pressing the WiFi On/Off button for two seconds turns the WiFi radios on and off.

The status LEDs are located on the front of the router.

Table 1. LED descriptions

LEDs Description

Power

• Solid green. The router is ready.

• Blinking green.

The firmware is upgrading or someone pressed the Reset button.

• Off. Power is not supplied to the router.

Internet

• Solid green. The Internet connection is ready.

• Amber:

The Internet port is connected, to the modem, but not yet connect to the Internet.

• Off. No Ethernet cable is connected between the router and the modem.

2.4 GHz

• Solid green. The 2.4 GHz WiFi radio is operating.

• Off.

The 2.4 GHz WiFi radio is off.

5 GHz

• Solid blue. The 5 GHz WiFi radio is operating.

• Off. The

5 GHz WiFi radio is off.

Ethernet port

s

• Solid green. 1G link rate on the Ethernet port.

• Solid amber

. 10/100 Mbps link rate on the Ethernet port.

• Off. No device is connected to this Ethernet port.

USB port

s • Solid green. A USB device is connected and is ready.

• Blinking.

A USB device is plugged in and is trying to connect.

• Off. No USB device is connected, or someone clicked the Safely Remove Hardware

button and it is now safe to remove the attached USB device.

Hardware Setup

11

N900 WiFi Router

Rear Panel

The rear panel connections and buttons are shown in the following figure.

Ethernet LAN ports (4)

WAN (Internet) port

USB ports (2)

Power On/Off button

Power connector

Reset button

Figure 3. Router rear panel

Pressing the Reset button restores the factory settings. See Factory Settings on page 155.

Position Your Router

The router lets you access your network anywhere within the operating range of your

wireless network. However, the operating distance or range of your wireless connection can

vary significantly depending on the physical placement of your router. For example, the

thickness and number of walls the wireless signal passes through can limit the range.

Additionally, other wireless access points in and around your home might affect your router’s

signal. Wireless access points are routers, repeaters, WiFi range extenders, and any other

device that emits a wireless signal for network access.

Position your router according to the following guidelines:

• Place your router near the center of the area where your computers and other devices

operate, and within line of sight to your wireless devices.

• Make sure that the router is within reach of an

AC power outlet and near Ethernet cables

for wired computers.

• Place the router in an elevated location, minimizing the number walls and ceilings

between the router and your other devices.

Hardware Setup

12

N900 WiFi Router

• Place the router away from electrical devices such as these:

- Ceiling fans

- Home security systems

- Microwaves

- Computers

- Base of a cordless phone

- 2.4 GHz cordless phone

• Place the router away from large metal surfaces, large glass surfaces, insulated walls,

and items such as these:

- Solid metal doors

- Aluminum studs

- Fish tanks

- Mirrors

- Brick

- Concrete

Cable Your Router

The following image shows how to cable your router:

Modem

Ethernet cable

DSL or cable

Router

Figure 4. Router cabling

 To cable your router:

1. Unplug your modem’

s power, leaving the modem connected to the wall jack for your

Internet service.

If your modem uses a battery backup, remove the battery.

2. Plug in and turn on your modem.

If your modem uses a battery backup, put the battery back in.

Hardware Setup

13

N900 WiFi Router

3. Connect your modem to the Internet port of your router with the yellow Ethernet cable that

came with your router.

4. Connect the power adapter to your router and plug the power adapter into an outlet.

5. Press the Power On/Off button on the rear panel of the router.

14

2

2. Connect to the Network and

Access the Router

You can connect to the router’s WiFi networks or use a wired Ethernet connection. This chapter

explains the ways you can connect and how to access the router and log in.

This chapter contains the following sections:

• Connect to the Network

• Types of Logins

• Use a Web Browser to Access the Router

• Change the Language

• Access the Router with NETGEAR genie Apps

Connect to the Network and Access the Router

15

N900 WiFi Router

Connect to the Network

You can connect to the router’s network through a wired or WiFi connection. If you set up

your computer to use a static IP address, change the settings so that it uses Dynamic Host

Configuration Protocol (DHCP).

Wired Connection

You can connect your computer to the router using an Ethernet cable and join the router’s

local area network (LAN).

 To connect your computer to the router with an Ethernet cable:

1. Make sure that the router is receiving power (its Power LED is lit).

2. Connect an Ethernet cable to an Ethernet port on your computer.

3. Connect the other end of the Ethernet cable to one of the numbered Ethernet ports.

Your computer connects to the local area network (LAN). A message might display on

your computer screen to notify you that an Ethernet cable is connected.

WiFi Connection

You can connect to the router’s WiFi network with Wi-Fi Protected Setup (WPS) or you can

find and select the WiFi network.

 To use WPS to connect to the WiFi network:

1. Make sure that the router is receiving power (its Power LED is lit).

2. Check the WPS instructions for your computer or wireless device.

3. Press the WPS button on the router.

4. Within two minutes, on your computer or WiFi device, press its WPS button or follow its

instructions for WPS connections.

Your computer or wireless device connects to the WiFi network.

 To find and select the WiFi network:

1. Make sure that the router is receiving power (its Power LED is lit).

2. On your computer or wireless device, find and select the WiFi network.

The WiFi network name is on the router’s label.

3. Join the WiFi network and enter the WiFi password.

The password is on the router’s label.

Your wireless device connects to the WiFi network.

Connect to the Network and Access the Router

16

N900 WiFi Router

Label

The label on the router shows the login information, WiFi network name and network key

(password), MAC address, and serial number

SN: 2PU1157WFFFFF

MAC: 123456789ABC

SSID: NETGEARXX

Password: asdfgjkllopqwerti345fsdk

.

Figure 5. Product label

Types of Logins

Separate types of logins serve different purposes. It is important that you understand the

difference so that you know which login to use when.

Types of logins:

• ISP login.

The login that your ISP gave you logs you in to your Internet service. Your

service provider gave you this login information in a letter or some other way. If you

cannot find this login information, contact your service provider.

• W

iFi network key or password. Your router is preset with a unique wireless network

name (SSID) and password for wireless access. This information is on the router label.

• Router login.

This logs you in to the router interface from a web browser as admin.

Use a Web Browser to Access the Router

When you connect to the network (either with WiFi or with an Ethernet cable), you can use a

web browser to access the router to view or change its settings. The first time you access the

router, NETGEAR genie automatically checks to see if your router can connect to your

Internet service.

NETGEAR genie Automatic Internet Setup

You can set up your router with the NETGEAR genie automatically, or you can use the genie

menus and screens to set up your router manually. Before you start the setup process, get

your ISP information and make sure that the computers and devices in the network are using

the settings described here.

When your Internet service starts, your Internet service provider (ISP) typically gives you all

the information needed to connect to the Internet. For DSL service, you might need the

following information to set up your router:

Connect to the Network and Access the Router

17

N900 WiFi Router

• The ISP configuration information for your DSL account

• ISP login name and password

• Fixed or static IP address setting (special deployment by ISP; this setting is rare)

If you cannot locate this information, ask your ISP to provide it. When your Internet

connection is working, you no longer need to launch the ISP login program on your computer

to access the Internet. When you start an Internet application, your router automatically logs

you in.

NETGEAR genie runs on any device with a web browser. Installation and basic setup takes

about 15 minutes to complete.

 To use NETGEAR genie to set up your router:

1. T

urn the router on by pressing the On/Off button.

2. Make sure that your computer or wireless device is connected to the router with an Ethernet

cable (wired) or wirelessly with the preset security settings listed on the label.

Note: If you want to change the router’s WiFi settings, use a wired connection

to avoid being disconnected when the new WiFi settings take effect.

3. Launch a web browser

.

The screen that displays depends on whether you accessed the router before:

• The first time you set up the Internet connection for your router, the browser goes to

http://www

.routerlogin.net and the NETGEAR genie screen displays.

• If you already used the NETGEAR genie, type http://www.routerlogin.net in the

address field for your browser to display the NETGEAR genie screen.

4. Follow the onscreen instructions.

NETGEAR genie guides you through connecting the router to the Internet.

5. If the browser cannot display the web page, do the following:

• Make sure that the computer is connected to one of the four LAN Ethernet ports or

wirelessly to the router.

• Make sure that the router is receiving power and that its Power LED is lit green.

• Close and reopen the browser or clear the browser cache.

Connect to the Network and Access the Router

18

N900 WiFi Router

• Browse to http://www.routerlogin.net.

• If the computer is set to a static or fixed IP address (this setting is uncommon),

change it to obtain an IP address automatically from the router.

6. If the router does not connect to the Internet, do the following:

a. Review your settings. Make sure that you selected the correct options and typed

everything correctly.

b. Contact your ISP to verify that you are using the correct configuration information.

c. Read Chapter 12, Troubleshooting. If problems persist, register your NETGEAR

product and contact NETGEAR technical support.

Log In to the Router

When you first set up your router, NETGEAR genie automatically starts when you launch a

web browser on a computer that is connected to the router. If you want to view or change

settings for the router, you can use genie again.

 To log in to the router:

1. Launch a web browser from a computer or wireless device that is connected to the

network.

2. Type http://www.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin. The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

Change the Language

By default, the language is set to Auto.

 To change the language:

1. Launch a web browser from a computer or wireless device that is connected to the

network.

2. Type http://www.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin. The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

Connect to the Network and Access the Router

19

N900 WiFi Router

4. In the upper right corner, select a language from the list.

5. When prompted, click the OK button to confirm this change.

The screen refreshes with the language that you selected.

Access the Router with NETGEAR genie Apps

The genie app is the easy dashboard for managing, monitoring, and repairing your home

network. The genie app can help you with the following:

• Automatically repair common wireless network problems.

• Easily manage router features like Live Parental Controls, guest access, Internet traffic

meter, speed test, and more.

 To use the genie app to access the router:

1. Visit the NETGEAR genie web page at www.NETGEAR.com/genie.

2. Follow the onscreen instructions to install the app on your smartphone, tablet, or computer.

3. Launch the genie app.

The genie app dashboard screen displays.

20

3

3. Specify Your Internet Settings

Usually, the quickest way to set up the router to use your Internet connection is to allow the genie

to detect the Internet connection when you first access the router with a web browser. You can

also customize or specify your Internet settings.

This chapter contains the following sections:

• Use the Internet Setup Wizard

• Manually Set Up the Internet Connection

• Specify IPv6 Internet Connections

• Change the MTU Size

Page is loading ...

Netgear WNDR4500v3 Owner's manual

Netgear WNDR4500v3 Owner's manual

Related papers

Other documents