2. Home
  3. Home security & automation
  4. Security device components
  5. VisionNet
  6. M625N

VisionNet M625N Installaton Manual

  • Hello! I'm a chat assistant that has reviewed the VisionNet M625N Installation Guide. This guide covers the initial setup of the gateway, including connecting antennas, internet cables for DSL and non-DSL uplinks, LAN devices, and power. It also includes instructions for secured WiFi connection and troubleshooting. I'm ready to help answer any questions you have about the device and its setup process.
  • What type of cable should I use for a DSL WAN connection?
    What type of cable should I use for a non-DSL WAN connection?
    What should I do if I experience intermittent WiFi issues?
M625N Installaon Guide
Connect Antennas
1
Connect WAN (Internet) Cable
FOR DSL WAN UPLINK:
Connect the DSL Cable to the “DSL” port.*
FOR NON-DSL WAN UPLINK:
Connect the Ethernet Cable to the “Omni” port.
* ONLY USE CABLES AND FILTERS PROVIDED BY YOUR ISP
Connect LAN Devices
Ethernet ports are ideal for Gaming Consoles and TV Devices.
Only connect ISP provided equipment to ports labeled “IPTV”
Connect Power Supply
Only use the provided 12VDC / 1.5A power supply.
Always use a surge protector.
2
3
4
WiFi SSID ends in last 6 digits of the Boom Label LAN MAC
Security Key matches the Boom Label Serial Number
Secured WiFi Connecon Instrucons
1
Search for the SSID associated with your VisionNet Gateway
2
When Prompted: Enter the Network Security Key
IF YOU EXPERIENCE INTERMITTENT WIFI ISSUES:
Press the “WiFi Channel” buon on the top of the M625N
Wait 60 seconds. The M625N will select a new WiFi channel
Aempt to reconnect
IF YOU STILL HAVE ISSUES, YOU MAY WISH TO CONTACT YOUR ISP
/