WayteQ X995 BT User manual

WayteQ x985BT GPS navigation

User’s manual

The user’s manual can be found at:

http://wayteq.eu/en/download

2

1. TECHNICAL SPECIFICATION

Processor

MStar MSB2531A

Memory (RAM)

256 MB

Internal memory

(storage)

8 GB

LCD display

5” TFT LCD, 800x480 pixel

Memory card support

microSD card, max. 32 GB

USB

MiniUSB connector

Speaker

Built-in

Earphone output

2.5 mm stereo jack

GPS receiver

Built-in, MStar MSR2112, (66

channels)

Battery

Built-in, Lithium-Ion

Charging current

DC 5V / 1,5 A

Car charger

DC 12-24V – 5V/1,5A

Operating system

Microsoft Windows CE 6.0

Navigation software

Optional

FM transmitter

Supported

Bluetooth

speakerphone

Supported

Operating conditions

5°C ~ 40°C operating

-10°C ~ 50°C storage

86KPa ~ 106KPa pressure

35% ~ 80% RH operating

30% ~ 90% RH storage

3

2. CONTROLS

1

2

3

4

5

6

7

8

9

4

1. Notification LED

2. Earphone output

3. MicroSD memory card

4. LCD touchscreen

5. MiniUSB charging and data socket

6. Power ON/OFF switch

7. Speaker

8. RESET button

9. Microphone

3. CHARGING WITH THE AC CHARGER

WARNING: During charging, the LED glows in red color. Do

not disconnect the device from the charger until charging

is complete and the LED glows in blue color. Charge the

device when the battery level is low.

Connecting the car charger

Use continuous power supply with

the supplied car charger when the

device in use.

WARNING: in order to avoid sudden power surges, attach

the device only after you have started the engine.

Indicator of the fully charged battery.

Battery

The device can be operated between 5 - 40°C, and it can

be stored safely between -10 - 50°C. Do not expose the

5

device to high temperatures or hot environment for a

prolonged time. For example do not leave the device

exposed to direct sunlight in the car. To avoid damage to

the device, keep it away from harsh environment.

Please follow the local guidelines and regulations before

you dispose the battery.

4. USING THE DEVICE

4.1 Turn ON/OFF

In order to turn on the device, press the POWER button for

3 seconds. You will see the following screen when the

system is started and it is ready to use:

Touch the icon to start the navigation program.

Touch the icon to start the music player.

6

Touch the icon to display the desktop.

4.2 GPS

Touch the GPS icon to start the navigation application. If

you purchased the device with a Sygic navigation software,

please refer to the software’s documentation that you can

find in the internal memory’s „Manual” folder, in PDF

format.

Further information can be obtained at: www.sygic.hu.

4.3 FM transmitter

Touch the icon. Using the FM transmitter, you can

wirelessly forward the sound of the applications to your

car stereo. Search for an FM frequency that is not used in

your area to avoid any interference. Tune your car’s radio

equipment to the same FM frequency so you can hear the

sound of your device.

Notice: A connected car charger is required to use the FM

transmitter.

7

4.4 Language

Touch the icon, select your preferred language, then

touch the „Back” button to apply the changes and return

to the application list.

8

4.5 Navigation application’s path

Touch the icon. The „Navigation Path Setting” screen

will appear, where you can browse for your preferred

navigation software’s executable file. After you have

selected the program, touch the „Back” button to apply

the changes, then you will be able to start the navigation

software by touching the „GPS” icon in the main menu.

9

4.6 GPS information

Touch the icon to show some information about the

GPS receiver’s current status.

10

4.7 USB mode

In the „USB Setting” screen you can choose the way to

connect your device to a PC.

 MS ACTIVESYNC – synchronize with a PC via

Windows Mobile Device Center.

 MASS STORAGE – transfer files between your

device and a PC, like with a flash drive.

11

4.8 USB connection with a PC

After you have successfully connected the USB cable and

the device is in „MASS STORAGE” mode, you will see the

picture above. This means, the PC that you are connected

to can see the device and it is ready to transfer files

to/from your device.

4.9 Touch screen calibration

Touch the icon to calibrate the touch screen.

12

Select to open the calibration screen. Take out the

stylus and precisely touch the screen with the stylus at the

center of the black cross sign, five times.

13

4.10 Factory defaults

Touch the in the main menu to restore the device to

its factory defaults. A dialog box will appear and prompt

for confirmation. If you are sure to reset the settings,

select button. Otherwise select to return to the

previous screen.

14

4.11 Favourite

Touch the icon to open the „Program Manager”. With

the help of program manager, you can create shortcuts to

your preferred applications, so you will not need to browse

those applications from the internal memory to start them

in the future.

15

Apply changes and exit

Add new application to the list

Remove application from the list

Start application

When you add a new application to the list, the Program

Manager will show executable programs with .exe

extension from the internal memory or from the external

microSD card.

16

Touch the button to add a new executable

application (.exe) to the list. Select that file from its

containing folder, then touch „OK”.

17

18

If you want to remove an item from the list, select that

item, then touch the button. Confirm the action

with the „YES” option.

19

5. DECLARATION OF COMFORMITY (ex.)

The importer states, that this product complies with the

conditions of use, and in accordance with regulations,

there is a product sticker on it, and have a warranty card

and a user’s manual in the box.

Based on a statement issued by the manufacturer, the

product will be placed on the market with CE marking,

according to the 79/1997.(XXII.31.) IKIM regulation’s 5.§

(1) point (HUNGARY).

20

6. QUALITY CERTIFICATION

The distributor testify, that this product is meets the

technical characteristics of the disclosure, as provided for

in 2/1984. (III.10.) IpM-BkM regulation (HUNGARY).

7. IMPORTER / DISTRIBUTOR:

WayteQ Europe Ltd.

6th Gubacsi str.

BUDAPEST, 1097

HUNGARY

Phone: +36-1 21 73 632

www.wayteq.eu

[email protected]

WARNING: WayteQ reserves the right to change the user

manual without any notice.The parameters of the product

can change without any notice.

WayteQ X995 BT User manual

This manual is also suitable for

WayteQ X995 BT User manual

Related papers

Other documents