12
For your safety
Functions
The aroma diffuser is a modern fragrance diffuser which uses ultrasound technology to generate a
nemistandthusdistributethefragrancethroughoutthewholeroom.
Operating buttons
The aroma diffuser is controlled using an operating button.
Button Function
Power button:
This button is used to switch the device on and off.
Ifthedeviceismovedduringoperation,anLEDashesandthediffusionoffragrancestops.Insuch
an event, the device has to be switched back on using the power button.
Cleaning and servicing
■ Before cleaning, pull the mains plug.
■ Empty the device after each use and dry the water tank with a cloth.
■ Wash the water tank with clear water when you wish to change the aroma. This prevents mixing
different aromas.
■ Only clean the outside of the device with a soft, slightly damp cloth. Then rub it dry with a soft, dry
cloth.
■ Do not under any circumstances us brushes, sharp cleaning implements, benzene, thinners or
alcohol.
Descaling
Descalethedeviceafterveorsixusesorevery14days.Todoso,proceedasfollows:
1. Disconnect the device from the power supply.
2. Fill the water tank with a maximum of 80 ml of water and add a tablespoonful of citric acid.
3. Allowtheliquidtotakeeffectforatleastfteenminutes.
4. Empty out the liquid.
5. Wipe out the water tank with a dry cloth.
However, if you have any questions, please contact our service department. The service department
address is included on the separate supplementary sheet.
Disposal
Electrical and electronic components must not be disposed of with the domestic waste.
Once the product reaches the end of its service life, dispose of it and its components sepa-
rately in accordance with the local valid regulations for disposal.