2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Electrical supplies
  5. Electrical wallplates
  6. Teraflex
  7. 4627400

Teraflex 4627400 Installation guide

  • Hello! I've reviewed the provided Installation Guide for the Tera Manufacturing Steering Box Skid Plate 004627400(SBSPT). The document details the steps for mounting the skid plate on TJ Wranglers '97-current. Installation includes removing bolts, positioning the plate and using self-tapping bolt. I'm ready to answer your questions about the installation process or the product itself.
  • What is the first step in the installation process?
    What size drill bit is required for installation?
    What is used to secure the final corner of the skid plate to the cross member?
Revised 25 May 05
Tera Manufacturing, Inc.
5251 South Commerce Dr. Murray, Utah 84107
Phone/801.288.2585 Fax/801.713.2313
www.teraex.biz
Fits TJ Wranglers ‘97-current
1. Remove the driver side lower bumper bolt, and the front
lower steering box bolt.
2. Place the skid plate in place, positioning it over the two bolt
holes now exposed.
3. With the skid plate positioned correctly, replace the bumper
bolt, and steering box bolt.
4. Use at washers to correct the spacing of skid plate when
using stock bumper.
7. With the skid plate in place, locate the remaining hole in the
ear of the skid plate. Using the hole as a guide, use a center
punch to mark the location on the round cross member.
8. Use a 5/16” drill bit to drill the location you just marked on
the cross member.
9. With the supplied self-tapping bolt, secure the nal corner of
the skid plate to the cross member.
Installation Guide
for the TJ Steering
Box Skid Plate Kit
Part #004627400(SBSPT)
INSTALLATION GUIDE
/