Page is loading ...
User Manual
8K HDR HDMI Audio Extractor 4x1
MODEL No. HDSW0040M1
FEATURES OF THE INTERFACE:
Picture 1.0 front panel showing
No.
Description
Introduction
①
Mini USB port
Only for factory upgrade
②
HDMI input indicators
The selected input channel indicator will light up.
③
HDMI output indicator
Lighting when HDMI OUTB has signal output.
④
ARC status indicator
Lighting when ARC on.
⑤
IR receiving window
Receive the commands sent by the infrared remote control.
⑥
EDID mode indicators
Include three audio EDID modes: PASS/2CH/5.1CH
⑦
Automatically detect
status indicator
Lighting when automatic detect is enabled
⑧
automatic detect
on/off key
Signal source input automatic detect function enabled or disabled.
⑨
Input selection key
Loop to select the input channel of HDMI
⑩
ARC on/off key
HDMI ARC (Audio return channel) function on/off.
⑾
EDID mode selection
key
Support three audio EDID mode switching :PASS/2CH/5.1CH.
⑿
Power status indicator
Lighting when power on.
⒀
Power switch
Power self - lock switch, turn on when pressed, turn off when bounced.
①
②
③
④
⑤
⑦
⑩
⑾
⑿
⒀
⑥
⑧
⑨
Picture 1.1 rear panel showing
No.
Description
Introduction
①
Power jack
Requires 5V power supply
②
HDMI output port B
Connects to monitor with HDMI port. This port supports audio & video
output and ARC.
③
HDMI output port A
Connects to Sound equipment with HDMI input port.
This port only outputs audio signals.
④
HDMI input port 4
Connects to your source device by HDMI cable.
⑤
HDMI input port 3
Connects to your source device by HDMI cable.
⑥
HDMI input port 2
Connects to your source device by HDMI cable.
⑦
HDMI input port 1
Connects to your source device by HDMI cable.
⑧
Analog audio ports
Synchronized output stereo analog audio, contains left and right
channels.
⑨
Digital audio port
Synchronized output digital audio by optical toslink port
①
②
③
④
⑤
⑥
⑦
⑧
⑨
Picture 1.2 IR panel showing and function introduction
* Please take out the film at the rear of the remote before you use. Please insert the film to remote rear if
you do not use the remote for long time.
Battery Type: CR2025 3V.
OFF
/
Power standby button
ON
/
Power on button
1/2/3/4
SWITCH key
Input source channel selection
∧/∨
SWITCH key
Loop switch the input channels in order 1-4
2CH
EDID key
Audio EDID 2CH mode.
Priority output stereo audio in this mode.
5.1CH
Audio EDID 5.1CH mode.
Priority output 5.1 channel bit stream in this mode.
The analog output ports have no output now.
PASS
Audio EDID PASS mode.
The audio output format is determined by the EDID
information of the output device (OUTA priority).
SPDIF/Ω
/
Digital and RCA audio output turn on / turn off
ARC
ARC key
ARC turn on / turn off
Auto
AUTO
Signal source input automatic detect function enabled
or disabled.
Connection and operation:
Matters needing attention:
1.Please use standard HDMI cable and connect the cable before powering the equipment.
2.The output port OUTA can output audio only. Connect OUTA to the HDMI input port of the audio
device (Power amplifier, Soundbar…) by an HDMI cable.
3.The audio output of the audio ports can be turned on/off by using the "SPDIF" key on the remote
control.
4. Analog audio can only be output when the audio format is LPCM, so it is recommended to choose
POWER SUPPLY
BD/PS5/XBOX/PC
BD/PS5/XBOX/PC
BD/PS5/XBOX/PC
BD/PS5/XBOX/PC
HDMI Cable
HDMI Cable
HDMI Cable
HDMI Cable
HDMI Cable
HDMI Cable
RCA audio cable
Audio fiber cable
Power amplifier/Soundbar
HDSW0040M1
the EDID mode in 2CH mode when using analog audio output.
5. If you want to use ARC or CEC, you must connect the TV to the OUTB port. Before using ARC,
make sure your TV HDMI port supports ARC and the ARC have been turned on.
6.The product has power off memory function. The setting state of the output channel is recorded and
saved. After the power is off, the saved data will be automatically retrieved for configuration.
SPECIFICATIONS:
Model No.
HDSW0040M1
Model name
8K HDR HDMI Audio Extractor 4x1
Input ports
HDMIx4
Output ports
HDMIx2,RCAx2,Optical x1
Video format
480P/720P/1080P/2160P@24/25/30/50/60/100/120Hz
Up to 4320P@50/60Hz(YCC420), Support HDR/Dolby Vision
Deep color
8/10/12/16Bit@2160P
8/10bit@4320P
Audio format
Dolby HD/DTS HD/Dolby Atoms/Dolby AC3/DTS/LPCM Etc.
Transmission bandwidth
1GHz Max.
Transmission rate
40Gbps Max.
IR distance
≤5m
Input cable length
4320P/AWG 26 ≤3m；2160P/AWG 26 ≤5m；1080P/AWG 26
≤10m
Output cable length
4320P/AWG 26 ≤3m；2160P/AWG 26 ≤5m；1080P/AWG 26
≤12m
Power adapter specification
AC 100~240V/ DC 5V/1A
Max working current
350mA
Working temperature range
-5 ~ +40℃
Working humidity range
5 to 85%RH（No Condensation）
Storage temperature
-15 to 55℃
Storage humidity
5 ~95%RH(No Condensation)
Size
205x75x30 (mm)
Weight
440g
Accessories
Manual, Remote, Power Adaptor
/
