Dunlop WM31 User manual

Type
User manual
The Supa-Lead Overdrive is a dynamic and touch sensitive OD that cleans up immediately as you lower the
guitar volume control. Designed to get amp-like crunch tones from a clean or slightly dirty amp, it produces
a focused midrange grind with an abundance of output volume to kick your amp over the edge.
W M31
IT’S A NATURAL LEADER!
jimdunlop.com/wayhuge
SUPA-LEA D
OVERDRIVE MKIII
TM
WAY HUGE • MINI SUPA LEAD 2
1 VOLUME sets output level
2 DRIVE knob knob sets overdrive intensity
3 TONE knob adjusts tone from dark to bright
4 FOOTSWITCH toggles effect on / bypass
(blue LED indicates on)
POWER
The Supa-Lead™ Overdrive is powered by a single 9-volt
battery, a 9-volt AC adapter such as the Dunlop ECB003,
or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power
supplies. The power input is a 5.5mm x 2.1mm jack with the
positive voltage on the outer sleeve. Using an external power
supply will disconnect the battery. Disconnect the input jack
to preserve battery life when not in use. The pedal will lock
into bypass mode when it is time to change the battery. It also
includes power protection circuitry to prevent damage from
AC power supplies.
1
2
3
4
External Controls
WAY HUGE • MINI SUPA LEAD 3
Specifications
Input Impedance > 500kΩ
Output Impedance < 5kΩ
Noise Floor -87 dBV
Bypass True Relay
Current Draw 15 mA
Power Supply DC 9 volts
All measurements made with controls at center. Noise measurements are A-weighted.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Dunlop WM31 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI