SMART Technologies Wall mount and wall stand kit Installation guide

SMART Technologies
Brand
SMART Technologies
Model
Wall mount and wall stand kit
Type
Installation guide
813 mm (32")
4.5 mm (3/16")
8 mm (5/16")
11 mm (7/16")
12.5 mm (1/2")
×2
2×
>305 mm
(>12")
ac
#2
4.7mm
(3/16")
4.5 mm (3/16")
8 mm (5/16")
11 mm (7/16")
12.5 mm (1/2")
58 mm
(2 1/4")
>432 mm (>17")
>432 mm (>17")
>63.5 mm
(>2 1/2
"
)
>25 mm
(>1")
>25 mm
(>1")
>25 mm (>1")
4.7 mm
(3/16")
64 mm
(2 1/2")
4.5 mm
(3/16")
×2
2×
813 mm (32")
B
b (×4)
ac (×6)
bd
bd (×4)
a (×6)
b
c
a
c (×6)
A
B
A
A
B
C
ac
E
F
D
http://www.toggler.com/products/snaptoggle/installation.php
https://www.tapcon.com/products/drill-bits
Hardware Selection Guide (Stand)
>432 mm (>17")
>432 mm (>17")
4.7 mm
(3/16")
>25 mm (>1")
>25 mm (>1")
>25 mm
(>1")
>63.5 mm
(>2 1/2")
58 mm
(2 1/4")
ac
4.5 mm
(3/16")
4.7 mm
(3/16")
×3
2×
64 mm
(2 1/2")
4.5 mm
(3/16")
406 mm
(16")
406 mm
(16")
b (×6)
a (×6)
a
ac (×6)
bd (×6)
bd
b
A
B
B
A
https://www.tapcon.com/products/drill-bits
smarttech.com/support
smarttech.com/contactsupport
*1021007*
1021007 Rev 06
© 2018 SMART Technologies ULC. All rights reserved. The SMART logo, smarttech and all SMART taglines are trademarks or registered trademarks
of SMART Technologoes ULC in the U.S. and/or other countries. All third-party products and company names may be trademarks of their respective
owners. Contents are subject to change without notice. This product and/or use thereof covered by one or more of the following U.S. patents;
smarttech.com/patents. Other patents pending. 10/2018.
Hardware environmental compliance
SMART Technologies supports global efforts to ensure that electronic equipment is manufactured, sold and disposed of in a safe and
environmentally friendly manner.
Waste Electrical and Electronic Equipment and Battery regulations (WEEE and Battery Directives)
Electrical and electronic equipment and batteries contain substances that can be harmful to the environment and to human health.
The crossed-out wheeled bin symbol indicates that products should be disposed of in the appropriate recycling stream and not as regular
waste. See smarttech.com/compliance for more information.
CAUTION: This wall mount or stand is intended for use with a display system with a maximum weight of 276 lb. (125 kg) and a maximum
diagonal of 84” (214 cm). Use with products that are heavier than the maximum weight indicated may cause the mount and its accessories
to collapse, resulting in possible personal injury.
KB 170464
Hardware Selection Guide (Wall Mount)
  • Page 1 1
  • Page 2 2

SMART Technologies Wall mount and wall stand kit Installation guide

SMART Technologies
Brand
SMART Technologies
Model
Wall mount and wall stand kit
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents