Attwood Marine 98085QG User guide

Type
User guide

Attwood Marine 98085QG is a heavy-duty, automatic bilge pump designed to remove water from the bilge of a boat. It features a powerful motor that can pump up to 1100 gallons per hour, and a durable construction that can withstand harsh marine environments. The pump is also equipped with a float switch that automatically turns the pump on when the water level in the bilge reaches a certain point, and turns it off when the water level drops. The Attwood Marine 98085QG is a reliable and effective bilge pump that can help to keep your boat dry and safe.

Attwood Marine 98085QG is a heavy-duty, automatic bilge pump designed to remove water from the bilge of a boat. It features a powerful motor that can pump up to 1100 gallons per hour, and a durable construction that can withstand harsh marine environments. The pump is also equipped with a float switch that automatically turns the pump on when the water level in the bilge reaches a certain point, and turns it off when the water level drops. The Attwood Marine 98085QG is a reliable and effective bilge pump that can help to keep your boat dry and safe.

attwoodmarine.com
WATER SYSTEMS & VENTILATION
28
Stainless Steel Thru-Hulls &
Scupper Valve Fittings
Polish your image with these beautiful, durable stainless steel ttings. Each Thru-Hull and Scupper Valve is
available with a new silicone gasket and are backed by Attwood’s trusted Lifetime Warranty! Why specify
plastic parts when these ttings will last the life of the boat?
Rugged Stainless Construction
Cast from certied Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
We polish all visible areas to a mirror nish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose exing
Faster, Simpler Installation
A channel under the ange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench ats or an end notch to hold as a gripping surface. One installer can tighten all
connections from inside the hull
Barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, Barbed
Standard Thread model has full-length thread for thick hulls and easy tightening
Short Thread is a more compact size. Allows installation near corners and in conned areas.
Caution: Stainless Steel Scupper Valves are designed for installation above the water line only.
A
Hose
Size
B
Flange
Dia.
C
Thread
O.D.
D
Thread
Length
E
Barb
Length
F
Total
Length
Install.
Hole Saw
Size Thread
NPSM
Max
Hull
Thick.
OEM Part #
without
Gasket Part #
Short Length
5/8" I.D. 1-7/8" 1" 1" 1" 2-1/4" 1-1/8" 3/4" 5/8" 66540-1 66540-3
3/4" I.D. 1-7/8" 1" 1" 1" 2-1/2" 1-1/8" 3/4" 5/8" 66541-1 66541-3
1" I.D. 2-1/4" 1-3/8" 1-1/8" 1" 2-1/2" 1-1/2" 1" 5/8" 66542-1 66542-3
1-1/8" I.D. 2-1/4" 1-3/8" 1-1/4" 1" 2-1/2" 1-1/2" 1" 5/8" 66543-1 66543-3
1-1/4" I.D. 2-1/4" 1-5/8" 1-1/4" 1" 2-5/8" 1-3/4" 1-1/4" 5/8" 66544-1 66544-3
1-1/2" I.D. 3" 1-7/8" 1-1/4" 1-1/2" 3-1/8" 2" 1-1/2" 5/8" 66545-1 66545-3
Standard Length
5/8" I.D. 1-7/8" 1" 2" 1-1/4" 3-3/4" 1-1/8" 3/4" 1-1/16" 66546-1 66546-3
3/4" I.D. 1-7/8" 1" 2" 1-1/4" 3-3/4" 1-1/8" 3/4" 1-5/8" 66547-1 66547-3
1" I.D. 2-1/4" 1-3/8" 2-1/4" 1-1/4" 3-7/8" 1-1/2" 1" 1-3/4" 66548-1 66548-3
1-1/8" I.D. 2-1/4" 1-3/8" 2-3/8" 1-1/4" 3-7/8" 1-1/4" 1" 1-3/4" 66549-1 66549-3
1-1/4" I.D. 2-1/4" 1-5/8" 2-1/2" 1-1/4" 4-1/4" 1-3/4" 1-1/4" 1-7/8" 66550-1 66550-3
1-1/2" I.D. 3" 1-7/8" 2-1/2" 1-1/4" 4-1/8" 2" 1-1/2" 1-7/8" 66551-1 66551-3
2" I.D. 3" 2-3/8" 2-1/2" 1-3/4" 4-5/8" 2-1/2" 1-1/2" 2" 66552-1
66540G
66542
66546G
66548
Dia. B
A
BC
DE
F
B
D
Dia. B
F
E
CA
Short Length Standard Length
2023 Attwood Catalog.indb 282023 Attwood Catalog.indb 28 6/16/22 1:08 PM6/16/22 1:08 PM
  • Page 1 1

Attwood Marine 98085QG User guide

Type
User guide

Attwood Marine 98085QG is a heavy-duty, automatic bilge pump designed to remove water from the bilge of a boat. It features a powerful motor that can pump up to 1100 gallons per hour, and a durable construction that can withstand harsh marine environments. The pump is also equipped with a float switch that automatically turns the pump on when the water level in the bilge reaches a certain point, and turns it off when the water level drops. The Attwood Marine 98085QG is a reliable and effective bilge pump that can help to keep your boat dry and safe.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI