DINMTPX-BT-EH-SA
BLUETOOTH 125 KHz RFID READER
SPECIFICATIONS
www.xprgroup.com
DINMTPX-BT-EH-SA_DS_EN_Ve1
The DINMTPXBTEHSA is a standalone reader with EM & HID
125 kHz technology. Easy to install, program and use thanks to its
Bluetooth® wireless technology.
This standalone system has 100 users capacity and can be
programmed with dierent access rights using our XPR Admin
Windows software or application. The system can also be used
with Mobile Apps (iOS, Android and OS) and it’s downloadable free
of charge.
All product speciications are subject to change without notice.
Electrical Characteristics:
User capacity:
Relays:
Output:
RFID reading type:
Reading distance:
Power supply:
Buzzer:
Backlight control:
Push button input:
Tamper:
RS485 interface:
Door Open Time:
Firmware upgrade:
Wiegand output:
Programming:
Holidays:
Event capacity:
Environmental Characteristics:
IP rating:
Operating Temperatures:
Operating Humidity:
· Standalone access control system for 1 door (or 2 doors using the
remote relay RU2)
· The Bluetooth module (BLE) allows programming (max. 5 meters),
events loading and access to the doors by smartphone (iOS, An-
droid), MacBook (OS) and PC (Windows).
· Encrypted communication with the provided remote relay unit in
a secured area to add extra security to the system.
· Encrypted Bluetooth® communication with additional authentica-
tion (administrators and users) to protect against hacking.
· The reader has an integrated clock and memory chip to make the
product a complete access control system, with functions such as
event reporting, time zones, holidays modiications, user validity
period and many more without an external controller.
· System can be used for a small installation like residential area
and also for businesses with a large number of readers using the
XPR Smart Admin software/app.
· The reader’s Wiegand output allows integration with third-party
systems, such as alarm panels or access controllers.
· Possibility of activating the reader outputs with XPR Smart Access
mobile applications.
100
1 built-in relay (3A; 24V AC/DC)
RS485 for remote relay unit, Wiegand
Card, Bluetooth (Mobile phone APP)
EM 4002/4100 and HID (125 kHz)
Up to 5 cm
12 - 24 V AC/DC max. 100mA
Yes, ON/OFF, via XPR Smart Admin
Yes, for on-board relay only
Yes
Yes
For connecting I/O boards like RU1,
RTT, RU2, and DINRTT
0 to 255 sec. or toggle (ON/OFF mode)
Yes, via Bluetooth® wireless technology
Wiegand 24, 26, 32, 34, 56, 58 bits
Via XPR Smart Admin
24
4,000
IP40
-20ºC to +50ºC (non-condensing)
5% to 95% RH without condensation
9mm
80mm
80mm
> Note: Electrical gang box not supplied. Electronics and frame are dierent references.
For the frame see DINFPC data sheet. Electronics reference: DINMTPXBTEHSAE
Silver Charcoal
DIMENSIONS & MOUNTING
COLOURS
White
FEATURES
Idle Mode Access Denied Access Granted
LEDS