xpr MTPADP-XPR-2.0 Operating instructions

MTPADP-XPR-2.0
Brand
xpr
Model
MTPADP-XPR-2.0
Type
Operating instructions

The xpr MTPADP-XPR-2.0 is a versatile reader that supports a wide range of card technologies, including Mifare, DESFire, and EM. It features advanced encryption capabilities for enhanced security and can be easily configured to suit various access control needs. Whether you need to control access to sensitive areas or manage user authentication, this reader offers a reliable and efficient solution.

The xpr MTPADP-XPR-2.0 is a versatile reader that supports a wide range of card technologies, including Mifare, DESFire, and EM. It features advanced encryption capabilities for enhanced security and can be easily configured to suit various access control needs. Whether you need to control access to sensitive areas or manage user authentication, this reader offers a reliable and efficient solution.

www.xprgroup.com 1
Coniguration of the MTPADPXPR2.0
and MTPX reader series in PROS CS systems
APPLICATION NOTE
v.b1
ONLine Access
A059
Before installing the readers
in the system, they have to
be conigured. Follow the
procedure bellow and then
mount the readers.
1. Generate encryption ile
Cards encryption can be used with Mifare Desire cards. Encryption provides higher level of security where card is accepted by its
encrypted content instead of built in card serial number.
You can skip this step if the encryption of the Mifare Desire cards will not be used.
Click on Settings/System parameters menu
Open Card encryption tab in System parameters window
a. To create new encryption
b. To import encryption from other system
• Click on Setup Encryption tab.
• Enter required parameters or click on Generate tab to load random values.
• Click on Save tab
• Click on Import encryption from ile tab.
• Select the encryption ile (*.desencb)
www.xprgroup.com 2
• Click on Open tab
• Enter the encryption ile password
• Click on Export Encryption to ile tab.
• Select ile location and name the ile
• Click on Save tab
• Enter password for ile
• Make sure the controllers are added in the system
• Open the reader properties
• Click on OK tab
c. To export the encryption to ile
After creating the encryption, you can export it to ile to be used in other systems.
• Click on OK tab
2. Reader coniguration
www.xprgroup.com 3
• Select the correct reader type
• Follow the instruction on the right side
• Click on the help tab (?) to open the manual
• Open Users management window
• Connect desktop reader to PC to enable Encrypt card tab
• Click on Encrypt card tab to open Card encryption window
• Follow the manual to manage encrypted cards
3. Encrypting cards
All product speciications are subject to change without notice.
Readers that are conigured with enabled Mifare Desire encryption will accept only Mifare cards that are encrypted.
Readers that are conigured with disabled Mifare Desire encryption will accept all Mifare cards.
  • Page 1 1
  • Page 2 2
  • Page 3 3

xpr MTPADP-XPR-2.0 Operating instructions

MTPADP-XPR-2.0
Brand
xpr
Model
MTPADP-XPR-2.0
Type
Operating instructions

The xpr MTPADP-XPR-2.0 is a versatile reader that supports a wide range of card technologies, including Mifare, DESFire, and EM. It features advanced encryption capabilities for enhanced security and can be easily configured to suit various access control needs. Whether you need to control access to sensitive areas or manage user authentication, this reader offers a reliable and efficient solution.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents