INSTRUCTIONS
WPLED® 10W 13W INSTALLATION
RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install
and end users to save energy
.
W
e’
d love to hear your comments
. Please call the Mar
keting Depar
tment at 888-RAB-1000 or email:
[email protected]IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING: Make certain power is OFF before installing or maintaining xture. No user serviceable parts inside.
CAUTION: For proper weatherproof function all gaskets must be seated properly and all screws inserted and tightened
rmly. Apply weatherproof silicone sealant around the edge of the Back Box and/or Junction Box. This is especially
important with an uneven wall surface. Silicone all plugs and unused conduit entries.
Junction Box Mount Surface Mount
1. (3) Lens ScrewsDoor
2. (2) Housing ScrewsHousing
Back Box Housing Gasket
3. Back Box
4.
5. Gasket Back BoxHousing
Housing Back BoxHousing Gasket
Back Box
6. Door tHousing(3) Lens Screws
(not shown).
7.
1. Crossbar CrossbarRecessed
Junction Box (2) Screws
2. Gasket Gasket
3. Recessed Box
4. Mounting Screw
CrossbarMounting Screw
5. Cap,
6.
Lens Screws
Back Box
Housing
Gasket
Housing
Door
Housing Screws
Crossbar
Gasket
Mounting
Screw
Cap
Recessed Junction Box
(not provided)