AireRyder X-CK12NN Installation guide

AireRyder
Brand
AireRyder
Model
X-CK12NN
Type
Installation guide

This manual is also suitable for

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THIS INSTRUCTION.
X-CK08 / X-CK12
Fig.2.
Fig.1.
Fig.4.
Fig.5.
Fig.8.
Canopy
Hook
Secure the mounting plate to the outlet
box with 2 mounting screws. (To reduce
the risk of fire, electric shock or personal
injury, mount to the outlet box marked
"Acceptable for fan support" and use
mounting screws provided with the outlet
box.)
Make sure the downrod unit is 3/4”
downrod. Loosen the downrod screw
and move the hanger ball downward.
Remove the lock pin and then hanger
pin from downrod.
Take off the hanger ball pin and ground
wire set. Move the hanger ball away.
Take the new bigger hanger ball, place
the downrod through the center hole
of it. Restore the hanger ball pin to
the downrod. Then slide the new hanger
ball up into position, secure it with two
hanger ball screws.
Outlet Box
Mounting Plate
Mounting Screw
Turn OFF the electric power at the
main fuse or circuit breaker box.
Ground Set
Hanger Ball
Hanger Ball Screw
Hanger Ball Pin
Hanger Ball Pin
Hanger Ball
Hanger Pin
Lock Pin
Canopy Screws
Lock Washer
Fig.6.
Downrod
Downrod
Slot
Chip
New Bigger Hanger Ball
Downrod Screw
Fig.7.
Hang the ceiling fan in the hook of hanger
plate. Make wire connection ( follow the
Ceiling Fan Installation Instruction).
Secure the canopy to the mounting plate
by using lock washers and canopy screws.
Thread the motor wires through downrod
stand cover (if necessary), canopy (included)
and downrod set. Make sure that the slot of
hanger ball is aimed into the chip of canopy
exactly. Follow the Ceiling Fan Installation
Instruction to install this downrod set into the
ceiling fan.
070602
TM
Fig.3.
Downrod
Hanger Pin
Motor Wires
Downrod Stand Cover
Lock Pin
Canopy
  • Page 1 1

AireRyder X-CK12NN Installation guide

AireRyder
Brand
AireRyder
Model
X-CK12NN
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents