LG CineBeam PU700R User manual

PU700R (PU700R-GL)

Please read the safety information carefully before using this product.

OWNER'S MANUAL

DLP Projector

www.lg.com

P/NO : SAC38519031 (2212-REV00)

OWNER'S MANUAL

2

ENGLISH

CONTENTS

PREPARATION

INSTALLATION

10 Projection Distance per Screen Size

12 Adjusting the Position of the Projection Screen

13 Adjusting the Angle and Focus of the Projection Screen

14 Kensington Security System

USING MAGIC LIGHTING REMOTE

15 Inserting Batteries in the Remote Control

16 Viewing the Remote Control Features

19 Pairing the Magic Lighting Remote

19 Re-registering the Magic Lighting Remote

19 Unregistering Magic Lighting Remote

20 Using the Magic Lighting Remote

CONNECTING DEVICES

21 Connecting with a HDMI Cable

22 Connecting with a USB-C Cable

23 Connecting a smart device (smartphone, tablet, etc.)

SAFETY PRECAUTIONS

CHECKING BEFORE REPORTING MALFUNCTION

35 Projector Safety Check

36 Troubleshooting

CHECKING INFORMATION

38 Specifications

39 HDMI/USB-C Supported mode

43 Licenses

44 Open Source Software Notice Information

45 Other specifications

46 Symbols

This manual is produced for public use and may contain images or contents

different from the product you purchased.

This manual is subject to change depending on the company’s circumstances.

3

ENGLISH

PREPARATION

The pictures may differ slightly from the actual product.

Accessories

Accessories included with the projector are shown below.

Accessories are subject to change without prior notice.

New accessories may be added or old ones removed.

Magic Lighting Remote

Two AA Batteries Owner's Manual

AC-DC Adaptor Power cord

• When connecting an HDMI or USB cable, or

connecting a USB flash drive to the HDMI

or USB port, use a product that has a width

of 18mm or less and a height of 10mm or

less. If the USB cable or USB flash drive does

not fit the USB ports of the projector, use an

extension cable that supports USB 2.0.

A ≤ 10mm

B ≤ 18mm

• Use a certified cable with the HDMI logo attached.

• If you do not use a certified HDMI cable, the screen may not display or a

connection error may occur. (Recommended HDMI cable types)

— Ultra High Speed HDMI®/™ Cable (3m or less)

4

ENGLISH

Optional Extras

To purchase optional accessories, visit an electronics store or online shopping site or

contact the retail store where you purchased the product. Optional accessories are

subject to change without prior notice.

Projection Screen LG Audio Device HDMI Cable

USB-C Cable

5

ENGLISH

Parts and Components

Speaker

Joystick Button

Outlet Vent2)

Lighting

IR Receiver Display Fit Sensor

Lens1)

Inlet Vent

1) Do not touch the lens when using the projector. The lens may be damaged. (Keep

lens away from sharp objects.)

2) Due to the high temperature of vent area, do not get close to the vent area.

6

ENGLISH

4

1 2 3

1

Port

2

Port

3

Port

4

(DC IN Port)

NOTE

• Open the projector terminal cover before connecting the cable.

7

ENGLISH

Using the Joystick Button

You can operate the projector by pressing the button or moving the joystick left, right,

up, or down.

Basic functions

Power On

When the projector is turned off, place your

nger on the joystick button, press it once, and

release it.

Power Off

(Press and

Hold)

Press and hold the joystick button for more than

3 seconds while the projector is on.

Volume

Control

Place your nger over the joystick button and

move it up or down, you can adjust the volume

level.

Up/Down/

Left/Right

If you move the joystick up, down, left, or right,

you can move the cursor to select the menu

items.

NOTE

• When moving the joystick button up, down, left or right, be careful not to move

the button while it is being pressed. The volume may not be adjusted and the

cursor may not move when the joystick button is pressed and moved.

8

ENGLISH

Adjusting the menu

When the projector is turned on, press the joystick button one time.

You can adjust the menu items moving the joystick button left, right, up, or down. Move

to the desired menu item, and then press the joystick button once to select it.

Turns the power off.

Changes the input source.

Clears on-screen displays and returns to projector viewing.

Displays the Settings menu.

9

ENGLISH

Projector Status Indicators

LED Power

Indicator

LED Power Indicator

Red

Power standby state

Off

The projector is operating with the power on.

10

ENGLISH

INSTALLATION

Projection Distance per Screen Size

1 Place the projector on a sturdy, level surface, together with the PC or audio/

video source.

2 Place the projector an appropriate distance away from the screen. The distance

between the projector and the screen determines the actual size of the image.

3 Connect the power cord of the projector and the connected device to the wall

outlet.

Ratio of upward projection: 100 %

X/2 X/2

Projection Distance (D)

Screen Height (X)

Screen

Y/2 Y/2

Projection Distance (D)

Screen

Screen Width (Y)

11

ENGLISH

16:9 Aspect Ratio

Screen Size Screen Width (Y) Screen Height (X) Projection

Distance (D)

inches mm mm mm mm

60 1524 1328 747 1615

70 1778 1550 872 1890

80 2032 1771 996 2160

90 2286 1992 1121 2440

100 2540 2214 1245 2710

110 2794 2435 1370 2980

120 3048 2657 1494 3255

The projection distance may vary depending on the installation conditions.

NOTE

• If the projected image looks distorted or bent, check to see if the screen is

installed properly.

12

ENGLISH

Adjusting the Position of the Projection Screen

Adjust the angle of the projector to adjust the screen position.

• When adjusting the angle of the projector, be careful not to tilt the projector

backward.

• When adjusting the angle of the projector, be careful not to an excessive force

the projector. It may damage the projector.

13

ENGLISH

Adjusting the Angle and Focus of the Projection

Screen

Be careful not to shake the product.

Automatically adjusts the angle and focus of the projection screen of the projector.

(Q. Settings) → ([Installation Wizard]) → [Auto Screen Adjustment]

When an image appears on the screen, check if it is in focus and ts the screen

properly. If the angle and focus of the projection screen are not adjusted automatically,

you can make detailed adjustments manually.

Adjusting the Angle Details of the Projection Screen

(Q. Settings) → ([Installation Wizard]) → [Edge Adjustment]

Adjusting the Focus Details of the Projection Screen

(Q. Settings) → ([Installation Wizard]) → [Focus Adjustment]

NOTE

• After using the product at room temperature, turning on the power may blur the

focus if the inside temperature is low, but it will recover over time.

• This defocusing is a temporary phenomenon that occurs in low-temperature

environments, and this will not affect the product’s performance or lifespan.

14

ENGLISH

Kensington Security System

• This projector has a Kensington Security Standard connector as an anti-theft

mechanism. Connect a Kensington Security System cable as shown below.

• For more information on installation and use of the Kensington Security System,

refer to the user’s guide provided with the Kensington Security System.

• The Kensington Security System is an optional accessory.

• What is Kensington?

Kensington is a company that provides safety systems for laptops and other

electronic devices. Website: http://www.kensington.com

15

ENGLISH

USING MAGIC LIGHTING REMOTE

• Depending on country

Inserting Batteries in the Remote Control

If the battery low message appears while using the Projector, replace the batteries.

Use 1.5V, AA-type alkaline batteries. Replace the two batteries with new ones and

insert them according to the direction indicator inside the remote control.

1 Remove the battery cover on the back of the

remote control by sliding it downwards.

2 Insert the batteries to match the +, - polarity

symbols.

3 Close the battery cover.

2

1

CAUTION

• Do not mix new batteries with old ones.

16

ENGLISH

Viewing the Remote Control Features

* : To use the button, press and hold for more than 3 seconds.

(Power)

Turns the Projector on or off.

(Input)

Changes the input source.

(Input) *

Accesses the [Home Dashboard].

Number buttons

Enters numbers.

*

Accesses the [Quick Help].

(Ready)

This button is currently unavailable and can be used as a

button for other functions through an update.

*

Edits QUICK ACCESS.

(QUICK ACCESS is a feature that allows you to enter a

specied app directly by pressing and holding the number

buttons.)

(More Actions)

Displays more remote control functions.

17

ENGLISH

(Volume button)

Adjusts the volume level.

(Page Up/Down)

Moves to the previous/next page.

(Mute)

Mutes all sounds.

(Mute) *

Accesses the [Accessibility] menu.

(Voice recognition)

Network connection is required to use the voice recognition

function. Check for recommended content. (Some

recommended services may not be available in some

countries.)

(Voice recognition) *

Speak while pressing and holding the button to use the

voice recognition feature.

(Home menu)

Accesses the Home menu.

(Home menu) *

Launches the last used apps.

(Back)

Returns to the previous screen.

(Back) *

Clears on-screen displays and returns to last input viewing.

(Up/Down/Left/Right)

Press the up, down, left or right button to scroll the menu. If

you press buttons while the pointer is in use,

the pointer will disappear from the screen and the Magic

Lighting Remote will operate like a general remote control.

To display the pointer on the screen again, shake the Magic

Lighting Remote to the left and right.

Wheel (OK)

Press the centre of the Wheel button to select a menu. You

can move cursor or menu by using the Wheel button.

18

ENGLISH

Streaming Service buttons

Connects to the Video Streaming Service.

(Picture Mode)

Changes the [Picture Mode].

(Sound Mode)

Changes the [Sound Mode].

(Q. Settings)

Accesses the Quick Settings.

(Q. Settings) *

Displays the [All Settings] menu.

(HDMI Input)

Change the input source to [HDMI].

(Adjust Details button)

These access special functions in some menus.

The remote control buttons light up so that you can use the

remote control in the dark.

If the remote control does not move, the pointer disappears

and the remote control light turns off in about 5 seconds.

The lighting function is applied when the product is shipped,

and if you press and hold the button for more than 5

seconds, the (POWER) button ashes twice and you

can turn the lighting function on or off.

(Focus Adjustment)

Accesses the [Focus Adjustment].

(Focus Adjustment) *

Initializes the focus that has already been set and adjusts

the focus anew.

(Installation Wizard)

Accesses the [Installation Wizard].

(Mood Lighting)

Turns the Mood Lighting function on or off.

19

ENGLISH

Pairing the Magic Lighting Remote

You must pair the Magic Lighting Remote with the projector to use it.

Pair the Magic Lighting Remote prior to use as follows.

1 Put batteries into the Magic Lighting Remote and turn the projector on.

2 Point the Magic Lighting Remote at your projector and press the Wheel

(OK) on the remote control.

• If the projector fails to register the Magic Lighting Remote, try again after

turning the projector off and back on.

Re-registering the Magic Lighting Remote

If the Magic Lighting Remote’s pointer does not appear on the projector, you must

re-register it.

1 Hold the remote control towards the projector and press the and

buttons at the same time for more than 5 seconds until instructions appear.

2 The previously registered remote control is deregistered and then registered

again.

Unregistering Magic Lighting Remote

If you have multiple LG Smart Projectors and want to register the Magic Lighting

Remote currently in use to another Projector, you must unregister the previous one.

1 If you press the button and the button at the same time for more

than 5 seconds, the lamp on Magic Lighting Remote will blink and the

registration will be canceled.

2 If you want to unregister and register for another LG Smart projector, please

follow the registration method above.

20

ENGLISH

Using the Magic Lighting Remote

1 If you shake the Magic Lighting Remote left and right or turn its wheel while

pointing it at the projector, a pointer will appear on the projector screen. If you

move the remote control in the direction you want, the pointer follows the

movement.

2 Move the pointer to the location you want and press the Wheel (OK)

button to execute the function.

3 If the pointer has not been used for a certain period of time, it will disappear.

When the pointer disappears from the screen, shake the Magic Lighting

Remote right and left. It will then re-appear. The pointer will disappear if you

press Up/Down/Left/Right buttons, and the remote will work as a standard

remote control.

4 You can control the projector by scrolling or pressing Wheel (OK) button

in the middle of Up/Down/Left/Right buttons. When viewing a screen that

requires scrolling, you can easily move up and down by scrolling the Wheel

(OK) button. When watching a video, you can press the Wheel (OK)

button to pause/play.

• If the pointer is not responding smoothly, you can reset the pointer by moving it

to the edge of the screen.

• You can set the pointer speed and size you want while it is on the screen.

(Q. Settings) → → [General] → [System] → [Additional Settings] →

[Pointer Options]

— [Tracking Speed]: Sets the pointer speed.

— [Pointer Size]: Selects the pointer size.

• Use the remote control within the working distance (within 10m). If there is

an obstacle between the projector and the remote control, it may not operate

properly.

• Depending on the peripherals (wireless router, microwave oven, etc.),

communication failures may occur.

• Impacts can cause the Magic Lighting Remote to malfunction.

• Take care not to bump into nearby furniture, electronic equipment, or other

people when using the Magic Lighting Remote.

• The Magic Lighting Remote may not work properly if a wireless router (AP) is

within 0.2m of the Projector. Your wireless router should be more than 0.2m

away from the Projector.

Page is loading ...

LG CineBeam PU700R, PU700R User manual

Related papers

Other documents