2. aspenhome
  3. I349HEGRP1a

aspenhome I349HEGRP1a Assembly Instructions

  • Hello! I'm a chat assistant, and I've reviewed the assembly instructions for the aspenhome I349-297H-WST Hutch and I349-297 Console. This document contains detailed steps for assembling the furniture, including how to attach back panels, pedestals and the top assembly. The guide also covers how to reverse the handles and join the hutch to the console using metal plates. I am ready to answer any questions you might have about assembling these products.
  • What tools are required for assembly?
    What is included in the hardware list?
    What should you do before using this product?
Page 1/3
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
ITEM NO: I349-297H-WST 96" Hutch
HARDWARE LIST:
No.
B
C
D
Description Sketch Quantity
Bolt Ø1/4" x 3/4" (20)
Lock Washer Ø1/4"
Allen Wrench 4mm
A
COMPONENTS LIST:
No.
1Description Sketch Quantity
Top Assembly
2 Left Pedestal
3
1 PC
1 PC 4
1 PC
1 PC
Right Pedestal
E5
6
20 PCS
F
Bolt Ø1/4" x 1-3/4" (20) 8 PCS
28 PCS
Flat Washer Ø1/4" x 3/4" Back Panel (Left)
FUNCTIONALITY INSTRUCTION
I349-297H
I349-297
Wood Screw #4 x 1-1/4"
G
1 PC
1 PCBack Panel (Middle)
28 PCS
Metal Plate 4 PCS 1 PCBack Panel (Right)
Leveler on Legs & Support Leg
Adjust the leveler
when necessary
16 PCS
11-17-2022
Page 2/3
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 2: Attach the back panel assembly to the left pedestal and right pedestal by using 8 bolts
(A), lock washers (C) and flat washers (D). Do not tighten the bolts completely.
Back Panel (Middle)
Back Panel (Right)
Back Panel (Left)
CD
A
E
STEP 1: Attach the back panels (left & right) to the back panel (middle) using 6 bolts (A), lock
washers (C) and flat washers (D) as shown below. Do not completely tighten bolts.
ITEM NO: I349-297H-WST 96" Hutch
11-17-2022
Left Pedestal
Right Pedestal
Back Panel Assembly A
ECD
STEP 3-1: Attach the top assembly to the pedestal assembly using 8 bolts (B), 6 bolts (A),
lock washers (C) and flat washers (D). Completely tighten all bolts.
Page 3/3
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 4: Position the hutch on the console. Attach the metal plates(G) to the back of hutch &
console with wood screws(F) as shown below.
F
I349-297H
I349-297
I349-297H
Hutch
I349-297
Console
Top Assembly
Metal
Plate
G
ITEM NO: I349-297H-WST 96" Hutch
STEP 3-2: Reverse each handle by removing the screws while each door is open and attach
all handles to the front of the doors with screws as shown below.
Handle
Handle
Screw
Screw
11-17-2022
B
E
C
D
A
E
C
D
Pedestal Assembly
Page 1/1
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
ITEM NO: I349-297-WST 96" Console
FUNCTIONALITY INSTRUCTION
Leveler on Legs & Support Leg
Adjust the leveler
when necessary
If you prefer to adjust the shelf
location, remove the screws and
move shelf brackets to the
desired location. Then secure the
brackets to shelf with screws.
09-20-2022
STEP 1: Reverse each handle by removing the screws while opening each door in the
middle and attach all handles to the front of middle doors with screws as shown below.
Handle
Screw Handle
/