Height
Width
Depth
I349-K
1802
Niigata seiki Co., Ltd.
6-15-22, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-31-5670 Fax. : +81-256-39-7730
MAIL [email protected]
URL http://www.niigataseiki.co.jp
AFTER USE CARE AND STORAGE
Wipe off any dirt from the surface using a soft, dry cloth moistened with a small amount of alcohol,
and then apply a rust inhibiting oil.
Never clean the surface with a wire brush, as that will cause scratches and inaccurate measurements.
Please keep the surface clean and dirt free.
After cleaning, store in an environment with low humidity to prevent corrosion.
Place instruments and workpieces on Surface Plate gently to prevent damage, and do not place sharp items on surface.
Wipe the surface before use to remove any dust or contamination which would cause scratches and wear the surface.
To prevent localized wear, do not concentrate use in one spot, but spread out use over entire surface.
Do not let water or oils set on surface for long periods as they may cause deterioration and affect accuracy.
Only use the Surface Plate for its intended purpose. Improper use may cause accidents or injuries.
CAUTIONS AND CARE DURING USE
INSTALLATION NOTES
Make sure the plate is level when installed for best accuracy and work efficiency .
Make sure all the feet are secure with no play or rattle to insure a flat surface.
Use a level (bubble tube or electronic) for accurate adjustment of surface level.
Make sure there is no vibration on surface when make measurements to prevent errors .
Keep away from dust and machining chips,etc. Contamination and debris will damage the surface and create errors in
measurements.
Use in location with stable temperatures. Temperature differences will cause warping of the surface and measurement
errors.
Product is heavy. Please use care when transporting and installing.
Alignment, scribing, and assembly of components.
Cast iron
MATERIAL
APPLICATIONS
13
45
59
Model
C3030C
C5050C
C4560C
38
57
60
300
500
600
60
75
100
300
500
450
SPECIFICATIONS
Surface Dimensions
WDH mm
Flatness
m
Weight
kg
Thank you for purchasing the CAST IRON SURFACE PLATE.
Please read this manual thoroughly before use, and use with care.
CAST IRON SURFACE PLATE
INSTRUCTION MANUAL
Model No. C3030C/C5050C/C4560C
-
1
Niigata seiki C3030C User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Niigata seiki LEEB HARDNESS TESTER LHT-400 User manual
-
-
-
-
-
-
-
-
-