Hampton Bay 15155 Installation guide

THANK YOU

We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this semi flush. We strive to

continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your

home improvement needs. Thank you for choosing Hampton Bay!

Item # 000-000

Model # 15155

USE AND CARE GUIDE

EDGEMOOR 2 LIGHT SEMI FLUSH MOUNT

Questions, problems, missing parts? Before returning to the store call

Hampton Bay Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday

1-877-527-0313

HAMPTONBAY.COM

2

Table of Contents

Table of Contents..........................................................2

Features .........................................................................2

Warranty.........................................................................2

Pre-Installation ..............................................................3

Planning for Successful Assembly...........................................3



Tool required............................................................................4

Hardware included...................................................................4



Package contents ....................................................................5



Installation ..................................................................... 6 

Care and Cleaning ........................................................ 8

Troubleshooting............................................................ 8

Features:

Thank you for purchasing this Hampton Bay interior flush mount. This product has been

manufactured with the highest standards of safety and quality.

1. Easy to install.

2. Two light semi-flush light with oil rubbed bronze finish and white fabric hardback shade with decorative metal design.

3. For energy savings this fixture has been engineered to safely use a Self-Ballasted Compact Fluorescent Bulb in place of an

incandescent bulb.

Warranty

The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of five (5) years from date of

purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product

is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the

manufacture’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration,

neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any

way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of

an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material or workmanship.

This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is consider normal wear

and tear.

The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular

purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any

consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of

said product.

Contact the Customer Service Team at 1-877-527-0313 or visit www.hamptonbay.com.

3 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

NOTE: You may use two 60W type A bulbs or

CFL equivalent (sold separately).

DANGER: Before starting installation of this fixture

or removal of a previous fixture, disconnect the

power by turning off the circuit breaker or by

removing the fuse at the fuse box.

WARNING: CONSULT A QUALIFIED ELECTRICIAN IF

YOU HAVE ANY ELECTRICAL QUESTIONS. If you

have any non-electrical questions about this

fixture, please call our Customer Service Team at

1-877-527-0313 or visit www.homedepot.com.

Please reference your SKU (000-000) or UPC

(802513151558).

IMPORTANT: KEEP your receipt and these

Instructions for Proof of Purchase.

Pre-Installation

PLANNING FOR SUCCESSFUL INSTALLATION

Read all instructions before installing.

To avoid damaging this product, place it on a soft, non-abrasive

surface such as carpet or cardboard.

IMPORTANT: Inspect the wire insulation for any

cuts, abrasions, or exposed copper that may have

occurred during shipping. If there is a defect in the

wire, do not continue the assembly process. Please call

the Customer Service Team at 1-877-527-0313.

4

NOTE: Hardware is not to scale.

Pre-Installation (continued)

TOOLS REQUIRED (NOT SUPPLIED)

Phillips Wire Pliers

Screwdriver Stripper

Safety Electrical

Goggles Tape

HARDWARE INCLUDED

A

B C

D E

F G

Part Description Quantity

A Mount strip 1

B Support screw 2

C Green ground screw 1

D Outlet box screw 2

E Cap nut 2

F G5/32” Hex nut 2

G Wire connector 3

5 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Pre-Installation (continued)

PACKAGE CONTENTS

H

I

J

K

L

M

N

O

Part Description Quantity

H Canopy assembly with shade 1

I Threaded pipe 1

J Glass Plate 1

K Plastic washer 1

L Metal washer 1

M G3/8” Hex nut 1

N Cap 1

O Finial 1

6

Installation

1

Preparation for mounting

2

Preparation for mounting

□ Tighten the support screws (B) full turns into the inside

mounting hole of mounting strip (A) (to be fully tightened

later), secure by G5/32” hex nut (F).

NOTE: The support screws (B) should extend

long enough to protrude through the canopy (H)

when it is mounted. (Adjust as needed)

□ Fasten the mounting strip (A) onto outlet box using two

outlet box screws (D).

3

Connect the wire

4

Cover the wire with wire

c

onnector

□ Strip 3/4” of insulation from the wire ends. Twist the

stripped ends together with pliers. The black wire from the

xture to black wire from outlet box, white wire from the

xture to white wire from outlet box. The bare copper

grounding wire from the xture must loop one turn under

the head of green ground screw (C) on the mounting strip

(A) before it is connected to the grounding conductor of the

supply circuit.

□ Cover the wire with wire connectors (G). Tape the wire

connector (G) and wire together. Carefully position all

wirings inside outlet box.

B

A

F

D

A

B

F

G

MOC.YABNOTPMAH 7

.ecnatsissa rehtruf rof 3130-725-778-1 tcatnoc esaelP

5

Installing the canopy to outlet box

6

Installing the threaded pipe

□ Place the canopy assembly (H) over the outlet box, let the

heads of support screws (B) come through the holes of the

canopy assembly (H), then tighten the cap nuts (E) to the

protruding support screws (H) on mounting strip (A) until

the

ure body is held rmly against the ceiling.

□ Thread the threaded pipe (I) into the bushing near the

sockets located on the canopy assembly (H).

7

Installing the light bulb

8

Installing the glass plate on the

l

amp

□ Install the light bulbs (not included) into the socket. Use

two 60-watt medium base bulbs or less.

NOTE: You can also use two 13w maximum UL listed

CFL bulbs (sold separately). Do not exceed the

recommended wattage.

□ Slide the glass plate (J), plastic washer (K), metal washer

(L) over the threaded pipe (I) and secure by G3/8”hex nut

(M) as show in diagram (Do not tighten excessively). Then

place the cap (N) over the threaded pipe (I) and secure by

the

ni

al (O).

Installation

H

E

H

E

I

B

A

I

J

K

L

N

O

M

8

Care and Cleaning

□ To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface

of the fixture.

□ To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the

fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the fixture.

□ Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

Troubleshooting

Problem Possible Cause Solution

The bulb is burned out. □ Replace the light bulb.

The power is off. □ Ensure the power supply is turned on.

Faulty switch. □ Test or replace switch.

Lights will not turn on

Faulty wire connection. □ Check wiring.

Fuse blows or circuit breaker trips

when light is turned on.

Crossed wires or power wire is

grounding out.

□ Discontinue use of the lamp.

□ Check wire connections.

□ Contact a qualified electrician or call the Customer

Care Service Team at 1-877-527-0313.

9 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

This page intentionally left blank

10

This page intentionally left blank

11 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

This page intentionally left blank

Questions, problems, missing parts? Before returning to the store call

Hampton Bay Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday

1-877-527-0313

HAMPTONBAY.COM

Retain this manual for future use.

Page is loading ...

Hampton Bay 15155 Installation guide

Hampton Bay 15155 Installation guide

in other languages

Related papers

Other documents