Legrand Nest Integration User guide

WWW.LEGRAND.US/ONQ

Connecting Nest to the

Intuity Home Automation System

Before beginning, install and conﬁgure the Nest Thermostat(s) according to the instructions included with the device.

NOTE: Make sure that the Nest Thermostat is connected via WiFi

to the same network in the home as the Intuity Controller.

Go to http://intuity.legrand.us on your browser and log in to your system.

Tap on “Device Assistant”

Tap “Add Device” Tap on “Add Manually”

Select the “Nest” Adapter, and press the “Add” button.

Next, walk through the steps to pair the Nest Thermo-

stat(s) with the Nest app. Instructions on how to do so will

be supplied with your thermostat. This step will require an

account to be created with Nest.

Once the username and password has been registered with

Nest, press the “Authorize” button in the Intuity app to allow

the Intuity Controller to connect to the Nest Thermostat(s).

At this time, a prompt will appear in the app asking for authorization to allow for control of the Nest Thermostat(s).

Press the “Accept” button to allow for control

Next, you will be prompted to enter the account infor-

mation for Nest. Enter the username and password

that was created to pair the Nest Thermostat(s) with

the Nest app. Press the “Sign In” button to proceed.

The ﬁnal step is to add the Nest Thermostat(s) to the Intuity System. Press the “Add” button to begin the search process. The

Intuity System will automatically discover the Nest Thermostat(s) on the network. Press the “Done” button to complete the

installation.

designed to be better

™