Alpha Ground Mount Security Bar Quick start guide

Brand: Alpha

Model: Ground Mount Security Bar

Type: Quick start guide

Alpha Ground Mount Security Bar is designed to provide additional security for enclosures in both indoor and outdoor applications. The kit includes all the necessary hardware for installation, and the detailed instructions will guide you through the process. Once installed, the security bar will help to prevent unauthorized access to the enclosure and its contents. It can be used for a wide range of applications, including securing equipment in data centers, server rooms, and other sensitive areas. The Alpha Ground Mount Security Bar is a cost-effective and easy-to-install solution for improving the security of your valuable equipment. Some of the features include:

Tools and Materials Required

• HandDrill

• CenterPunch

• 4-footLevel

• 7/16"SocketDriverwithExtension

• 1/8"DrillBit

• #K(9/32"or.281")DrillBit

• TapeMeasure

• MaskingTape

• Pencil

• UtilityKnife

• Vacuum(Toremovedrillswarffromcabinetinterior)

• Lock(seeFig.1fordimensions)

SecurityBarFieldInstallationInstructionsFiel

ForFPE,UPE-3,UPE-6,UPE-M3,UPE-M6,PNSeriesandCESeriesEnclosures

Eachsecuritybarkitcontainsthepartsandaccessoriesneededtosecureoneenclosuredoor.Enclosureswithbothafrontandback

door,requiretwokits(expectwherenotedbelow).DetailedplacementspecicationsforeachsupportedenclosureareintheSecurity

BarFieldInstallationManual(SearchforP/N745-847-C1-001)availableatwww.alpha.com.

Installing the Security Bar

Theinstallationoutlinedinthisdocumentappliestoeachof

thesupportedenclosures.SeePage2forinstallationdetail

gures.LockdimensionsmustconformtoFigure1.

Ifnecessary,placementspecicationsforeachsupported

enclosureareintheSecurityBarFieldInstallationManual

(AlphaP/N745-847-C1-001)availableatwww.alpha.com.

A=5/16"

B=3/4"

C=21/2"

Figure1,LockDimensions

1. Usinga4-ftlevelandapencil,marktheenclosurewherethe

topofthesidebracketswillbeplaced,seeFigure2.

2. Positionthesidebracketandcenterpunchtheholes

3. Removethedoor.Protectanyelectronicequipmentfrom

drillshavingsbeforedrilling,andensurethedrillbitwillnot

contactanyequipmentasitpassesintotheenclosure.

Page1of2

Onlyqualiedpersonnelshouldcompletethisinstallation.Irreparabledamagemayoccurtothe

enclosureorequipmentifnotinstalledcorrectly.

CAUTION!

4. Pilotdrillthesidebracketholesusingthe1/8"drillbit.

5. Drillthetwotopholesusinga#Kdrillbit.SeeFigure3.

6. Usingthesidebracketsastemplates,markanddrillthetwo

bottomholes.

7. Installthesidebrackets,seeFigure4,andreplacethedoor.

8. Installthesecuritybarinthesidebrackets.Positionanduse

thelockbracketasatemplateformarkingitsholes.

9. Drillthelockbracketholes.

NOTE:

Wherenecessary,usetheutilityknifetocutand

removeinsulationfromthehardwarearea.

10. Installthelockbracket.SeeFigure5.

11. InstalltheotherSecurityBarSideandLockBracketsby

repeatingSteps1–8.

12. Removeanymetalshavings.

13. SecuretheenclosurewiththeSecurityBar,LockandLock

Guard.SeeFigure6.

Enclosure Color AlphaPartNumber

#ofRequired

Kits

KitComponentsDescription(Qty)

UPE

SeafoamGreen 745-847-20

• LockBracket(2)

• SideBracket(4)

• SecurityBar(2)

• LockGuard(2)

• CarriageBolt1/4"-20X3/4"(12)

• LockWasher1/4"(12)

• FlatWasher1/4"(12)

• HexNut1/4"-20(12)

Gray 745-847-21

SeafoamGreen 745-847-20

Gray 745-847-21

SeafoamGreen 745-847-20

Gray 745-847-21

FPE

SeafoamGreen 745-847-22

• LockBracket(4)

• SideBracket(8)

• SecurityBar(4)

• LockGuard(4)

• CarriageBolt1/4"-20X3/4"(24)

• LockWasher1/4"(24)

• FlatWasher1/4"(24)

• HexNut1/4"-20(24)

Gray 745-847-23

PineGreen 745-847-24

White 745-847-25

NOTE:

Onenclosuredoorswithlouvers,positiontheLock

Brackettoeithersideofthelouvers.SeePage2.

AlphaTechnologiesreservestherighttomakechangestotheproductsandinformationcontainedinthisdocumentwithoutnotice.

isaregisteredtrademarkofAlphaTechnologies.memberofTheAlphaGroup™isatrademarkofAlphaTechnologies.

745-847-C2-001,Rev.B(08/2013)

Formoreinformationvisitwww.alpha.com

UnitedStates Bellingham,WashingtonTel:3606472360Fax:3606714936

Canada Burnaby,BritishColumbiaTel:6044301476Fax:6044308908

member of

The Group

Page2of2

Detailed specications for each supported enclosure are in the security bar eld installation manual (search for Alpha part

number 745-847-C1-001) available at www.Alpha.com. The FPE enclosure is shown below as an example.

Figure4,SideBracketInstallation

(Left bracket installation is mirrored)

(FPE Enclosure shown as an example))

CARRIAGE BOLT

1/4"-20 X 3/4"

FLAT WASHER 1/4" (2 PLACES)

LOCK WASHER 1/4" (2 PLACES)

NUT 1/4"-20 (2 PLACES)

ENCLOSURE DOOR

LOCK BRACKET

Figure5,LockBracketAlignmentandInstallation

LOCK BAR

LOCK

LOCK GUARD

Figure6,LockGuardInstallation

Figure3,DrillLocations

Figure2,MarkingBracketLocations

Thesecuritybarandlockbracketlockholesmustlineupbeforesecuringthelock

brackettotheenclosuredoor,seeFigure5.

NOTE:

Step1

Step2

Step3

Step4

Alpha Ground Mount Security Bar Quick start guide

Alpha Ground Mount Security Bar Quick start guide

Alpha Ground Mount Security Bar Quick start guide

Related papers

Other documents