Havis C-DMM-118 User manual

C-DMM-118
Havis
Brand
Havis
Model
C-DMM-118
Category
Car kits
Type
User manual

Havis C-DMM-118 is a vehicle-specific dash mount bracket system designed for 2006-2013 Chevy Vans. It enables the installation of a computer monitor, providing a stable and secure mounting solution for various applications. The system includes a vehicle-specific dash mount bracket, a computer-specific monitor adapter bracket, and an offset adapter bracket for additional adjustability. The C-DMM-118 allows for easy viewing and interaction with the monitor while driving, enhancing productivity and efficiency.

Havis C-DMM-118 is a vehicle-specific dash mount bracket system designed for 2006-2013 Chevy Vans. It enables the installation of a computer monitor, providing a stable and secure mounting solution for various applications. The system includes a vehicle-specific dash mount bracket, a computer-specific monitor adapter bracket, and an offset adapter bracket for additional adjustability. The C-DMM-118 allows for easy viewing and interaction with the monitor while driving, enhancing productivity and efficiency.

The Dash Monitor Mount bracket system requires two or three main parts that
are Sold Separately. See web site Monitor Configurator for more detailed
bracket information. http://www.havis.com/monitor_mounts.htm
• 1 - Vehicle Specific dash mount bracket. (C-DMM-118)
• 1 - Computer Specific Monitor adaptor bracket. (C-MM-200 series)
• 1 - Offset adaptor bracket. (C-MM-301)
The C-MM-301 offset adaptor goes between the C-DMM-118 and C-MM-2XX.
It may not be required in some applications.
TOOLS REQUIRED:
• Ratchet Wrench
• Socket Set
• Open End Wrenches - 7/16”, 1/2”
• Phillips Screwdriver (short)
HARDWARE:
QTY: DESCRIPTION: PART #:
4 8/32 x 1/4” Flat Head Machine Screw GSM33178
4 8/32 Keps nut GSM30027
4 10/32 x 1/2 Flat Head Machine Screw GSM33072
4 1/4-20 Hex Flange Serrated Nut GSM30023
1 Monitor Adapter Hardware Varies (monitor specific)
ALWAYS!
• Read all instructions before installing any Havis, Inc products.
• Use hardware provided with install kit
INSTALL INSTRUCTIONS
C-DMM-118
2006-2013 CHEVY VAN SWING-OUT DASH MONITOR MOUNT
C-DMM-118_INST_11-12
C-DMM-118
Assembly for Chevy Van
C-MM-201
Monitor Mount Adaptor
(VESA bracket shown)
C-MM-301
Offset Adaptor
C-DMM-118_INST_11-12
INSTALLATION
Note: The C
-DMM-118 is shipped assembled. It will need to be partially un-assembled prior to installation.
Carefully remove driver side lower dash panel.
It
may not be necessary to be completely removed
.
OEM Dash
Prior to installation.
Carefully remove passenger side lower dash panel.
It may not be necessary to be completely removed
.
(7 mm socket)
Detach center dash panel and pull out
the AM/FM radio.
Unplug and remove radio from dash.
Unscrew AM/FM radio from dash.
Screws will be reused
(7 mm socket)
C-DMM-118_INST_11-12
Attach side support brackets to dash with
previously removed OEM radio screws.
One each side (7 mm socket)
Insert main bracket frame into dash cavity.
Make sure not to pinch wires.
Loosely attach frame to side support brackets with
10/32 x 1/2” machine screws provided.
Tighten screws after next step. (Phillips screwdriver)
Attach main bracket frame to forward OEM
support
with clamp provided. Tighten 1/4” nuts.
(7/16” socket with extension)
Attach door frame assembly to main frame
studs with four (4) 8/32 nuts provided.
(11/32 socket)
Plug wires into radio and mount radio to frame
studs with four (4) 8/32 nuts provided.
(11/32 socket)
C-DMM-118_INST_11-12
Attach Trim Bezel to frame with four (4)
screws
provided.
Note: The gas spring may need to be temporarily
removed from frame in order to install Trim
Bezel properly.
(1/2 wrench and socket)
Attach Monitor /
bracket assembly to swing door
with 1/4
” nuts provided with the monitor adaptor
brackets.
Attach C-MM-200 monitor adaptor bracket to
the back of monitor. Also attach C-MM-301
adaptor if required.
View of completed C-DMM-
118 installation with
a DS-DA-211 docking station, C-VS-1800-SAV
console, C-MD-204 tilt swivel and C-KBM-102
keyboard mount.
View of completed C-DMM-118 installation
with a C-VS-1800-SAV console, C-MD-
204 tilt
swivel and C-KBM-102 keyboard mount.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Havis C-DMM-118 User manual

C-DMM-118
Havis
Brand
Havis
Model
C-DMM-118
Category
Car kits
Type
User manual

Havis C-DMM-118 is a vehicle-specific dash mount bracket system designed for 2006-2013 Chevy Vans. It enables the installation of a computer monitor, providing a stable and secure mounting solution for various applications. The system includes a vehicle-specific dash mount bracket, a computer-specific monitor adapter bracket, and an offset adapter bracket for additional adjustability. The C-DMM-118 allows for easy viewing and interaction with the monitor while driving, enhancing productivity and efficiency.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents