2. Dacor
  3. MRV48ERS

Dacor MRV48ERS, MRV36-ERM, MRV36ERS, MRV48ERM Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Dacor MRV48ERS Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Instructions:
Introduction:
The DR30EI[F]S, RNR30NI[F]S and RR30NI[F]S ranges require a rear trim piece for installations
with a downdraft vent. The trim piece attaches to the back of the range and covers the front of the
downdraft vent chassis when the range is slid into position.
Downdraft Vent Trim Kit,
P/N ATKR30SR
INSTALLATION
INSTRUCTIONS
RANGE MODELS: DR30EIS, DR30EIFS, RNR30NIS,
RNR30NIFS, RR30NIS, RR30NIFS
Part No. 107333 Rev. B
Parts included with this kit:
3 Hex Screws PN 83023
Rear Trim Piece PN 107324
Trim Installation
(Range style varies with model)
Trim Installed
Install the rear trim piece as shown using the three hex screws included with the kit. The screws
thread into the pre-drilled holes on the back of the range.
Dacor ● 14425 Clark Avenue, City of Industry, CA 91745 ● Phone: (800) 793-0093 ● Fax: (626) 403-3130 ● www.dacor.com
/