Dacor MRV36ERS Installation guide

Instructions:

Introduction:

The DR30EI[F]S, RNR30NI[F]S and RR30NI[F]S ranges require a rear trim piece for installations

with a downdraft vent. The trim piece attaches to the back of the range and covers the front of the

downdraft vent chassis when the range is slid into position.

Downdraft Vent Trim Kit,

P/N ATKR30SR

INSTALLATION

INSTRUCTIONS

RANGE MODELS: DR30EIS, DR30EIFS, RNR30NIS,

RNR30NIFS, RR30NIS, RR30NIFS

Part No. 107333 Rev. B

Parts included with this kit:

3 Hex Screws PN 83023

Rear Trim Piece PN 107324

Trim Installation

(Range style varies with model)

Trim Installed

Install the rear trim piece as shown using the three hex screws included with the kit. The screws

thread into the pre-drilled holes on the back of the range.

Dacor ● 14425 Clark Avenue, City of Industry, CA 91745 ● Phone: (800) 793-0093 ● Fax: (626) 403-3130 ● www.dacor.com

This manual is also suitable for

Download PDF