OPERATIONS MANUAL
PCM-CFLASH-2
NOTE: This manual has been designed and created for use as part of the WinSystems’ Technical Manuals
CD and/or the WinSystems’ web site. If this manual or any portion of the manual is downloaded, copied
or emailed, the links to additional information (i.e. software, cable drawings) will be inoperable.
WinSystems reserves the right to make changes in the circuitry
and specications at any time without notice.
Copyright 2008 by WinSystems. All Rights Reserved.
REVISION HISTORY
P/N 403-0029-000
ECO Number Date Code Rev Level
ORIGINATED 011012 C
04-34 040806 F
06-18 060314 G
07-143 080108 G.1
Table of Contents
Visual Index – Quick Reference i
Top View - Connectors i
Introduction 1
General Information 1
Features 1
Functional Capability 2
Master/Slave Mode Selection 2
Auxiliary Power Input 3
IDE Interface 3
Alternate IDE Interface 4
PC/104 Bus Interface 5
CFLASH Device 3.3V/5V Mode Selection 6
PCM-CFLASH-2 Parts Placement Guide 7
PCM-CFLASH-2 Parts List 8
Jumper Reference 9
PCM-CFLASH-2 Schematic Diagram 10
Specications 11
WARRANTY REPAIR INFORMATION 12
This page is left intentionally blank.
080108 OPERATIONS MANUAL PCM-CFLASH-2 i
Visual Index – Quick Reference
Top View - Connectors
For the convenience of the user, a copy of the Visual Index has been provided with
direct links to connector and jumper conguration data.
J7 PC/104
Interface
NOTE: The reference line to each component part has been drawn to Pin 1, where applicable.
Pin 1 is also highlighted with a red square, where applicable.
J5 Master/
Slave Mode
o 1
o 2
o 3
J1,J8
Alternate
IDE
Interface
1 o o 2
3 o o 4
5 o o 6
7 o o 8
9 o o 10
11 o o 12
13 o o 14
15 o o 16
17 o o 18
19 o o 20
21 o o 22
23 o o 24
25 o o 26
27 o o 28
29 o o 30
31 o o 32
33 o o 34
35 o o 36
37 o o 38
39 o o 40
41 o o 42
43 o o 44
J6
Auxiliary
Power
Input
1 2 3 4
o o o o
J2, J9 IDE
Interface
1 o o 2
3 o o 4
5 o o 6
7 o o 8
9 o o 10
11 o o 12
13 o o 14
15 o o 16
17 o o 18
19 o o 20
21 o o 22
23 o o 24
25 o o 26
27 o o 28
29 o o 30
31 o o 32
33 o o 34
35 o o 36
37 o o 38
39 o o 40
J10 Voltage
Selection
o 1
o 2
o 3
080108 OPERATIONS MANUAL PCM-CFLASH-2 1
This manual is intended to provide the necessary information regarding conguration and
usage of the PCM-CFLASH-2 board. WinSystems maintains a Technical Support Group to help
answer questions regarding usage, or programming of the board. For answers to questions not
adequately addressed in this manual, contact Technical Support at (817) 274-7553 between
8 a.m. and 5 p.m. Central Standard Time.
PC/104 Compatible Flash Disk Adapter Module
Supports Compact Flash and IBM Microdrives
Master/Slave operation for multiple drive support
LED provides visual status indication of data transfer
Two IDE input/output connectors for cabling exibility
+5 Volt only operation
•
•
•
•
•
•
General Information
Introduction
Features
The PCM-CFLASH-2 is a PC/104-compatible adapter module designed specically to adapt
Compact Flash modules for rugged embedded systems use. The adapter provides for master/
slave selection as well as providing a visual drive status indicator. Two IDE connectors are
provided for maximum cabling exibility. The Compact Flash Drives are IDE interfaced and are
fully software compatible with IDE hard disks. This compatibility at the hardware level means
that special software drivers are not required. The PCM-CFLASH-2 supports Compact Flash
Type I and II and IBM Microdrives.
080108 OPERATIONS MANUAL PCM-CFLASH-2 2
Functional Capability
Master/Slave Mode Selection
Visual
Index
The PCM-CFLASH-2 can be used in any of four modes.
1. Stand-alone - no other IDE device.
2. As a master to a slave PCM-CFLASH-2.
3. As a secondary drive to another PCM-CFLASH-2.
4. As a secondary drive to an IDE hard disk.
NOTE: Master/Slave capabilities may be limited by certain media.
1 2 3 4
o o o o
J6
1 2 3
o o o
J5
The jumper block at J5 selects master/slave mode as shown here.
1 2 3
o o o
J5
1 2 3
o o o
J5
Master Mode
Slave Mode
080108 OPERATIONS MANUAL PCM-CFLASH-2 3
Auxiliary Power Input
When the PCM-CFLASH-2 is not used on a PC/104 stack, power must be supplied via
the connector at J6. The pin denitions for J6 are shown here:
Visual
Index
IDE Interface
The PCM-CFLASH-2 default IDE interface is made via the connectors at J2 and J9. An
alternate IDE interface is available at J1 and J8, wtih 44-pin connectors that supply voltage
through the extra pins. Pinout for J2 and J9 is shown here for reference. Pinout for J1 and J8
is shown on the following page. A red activity LED is present at D1.
1 o
2 o
3 o
4 o
N/C
GND
GND
VCC
J6
1 o o 2
3 o o 4
5 o o 6
7 o o 8
9 o o 10
11 o o 12
13 o o 14
15 o o 16
17 o o 18
19 o o 20
21 o o 22
23 o o 24
25 o o 26
27 o o 28
29 o o 30
31 o o 32
33 o o 34
35 o o 36
37 o o 38
39 o o 40
Reset*
D7
D6
D5
D4
D3
D2
D1
D0
GND
GND
IOW
IOR
N/C
N/C
INTRQ
A1
A0
HDCS0
N/C
GND
D8
D9
D10
D11
D12
D13
D14
D15
N/C
GND
GND
GND
ALE
GND
IOCS16*
N/C
A2
HDCS1
GND
J2 and J9
Visual
Index
080108 OPERATIONS MANUAL PCM-CFLASH-2 4
Visual
Index
1 o o 2
3 o o 4
5 o o 6
7 o o 8
9 o o 10
11 o o 12
13 o o 14
15 o o 16
17 o o 18
19 o o 20
21 o o 22
23 o o 24
25 o o 26
27 o o 28
29 o o 30
31 o o 32
33 o o 34
35 o o 36
37 o o 38
39 o o 40
41 o o 42
43 o o 44
Reset*
D7
D6
D5
D4
D3
D2
D1
D0
GND
GND
IOW
IOR
N/C
N/C
INTRQ
A1
A0
HDCS0
N/C
VCC
GND
GND
D8
D9
D10
D11
D12
D13
D14
D15
N/C
GND
GND
GND
ALE
GND
IOCS16*
N/C
A2
HDCS1
GND
VCC
GND
J1 and J8
Alternate IDE Interface
Optional 44-pin IDE connectors with power can be substituted at J1 and J8.
Pinouts for the connectors at J1 and J8 are shown here for reference.
080108 OPERATIONS MANUAL PCM-CFLASH-2 5
PC/104 Bus Interface
The PCM-CFLASH-2 supports I/O expansion through the standard PC/104 connectors at
J7. The PCM-CFLASH-2 supports both 8-bit and 16-bit PC/104 modules. The PC/104
connector pin denitions are provided here for reference purposes.
Visual
Index
J7 PC/104 BUS CONNECTOR
# = Active Low Signal
NOTES:
1. Rows C and D are not required on 8-bit modules.
2. B10 and C19 are key locations. WinSystems uses key pins as connections to GND.
3. Signal timing and function are as specied in ISA specication.
4. Signal source/sink current differ from ISA values.
D0 o o C0
D1 o o C1
D2 o o C2
D3 o o C3
D4 o o C4
D5 o o C5
D6 o o C6
D7 o o C7
D8 o o C8
D9 o o C9
D10 o o C10
D11 o o C11
D12 o o C12
D13 o o C13
D14 o o C14
D15 o o C15
D16 o o C16
D17 o o C17
D18 o o C18
D19 o o C19
GND
MEMCS16#
IOCS16#
IRQ10
IRQ11
IRQ12
IRQ15
IRQ14
DACK0#
DRQ0
DACK5#
DRQ5
DACK6#
DRQ6
DACK7#
DRQ7
+5V
MASTER#
GND
GND
GND
SBHE#
LA23
LA22
LA21
LA20
LA19
LA18
LA17
MEMR#
MEMW#
SD8
SD9
SD10
SD11
SD12
SD13
SD14
SD15
KEY
A1 o o B1
A2 o o B2
A3 o o B2
A4 o o B4
A5 o o B5
A6 o o B6
A7 o o B7
A8 o o B8
A9 o o B9
A10 o o B10
A11 o o B11
A12 o o B12
A13 o o B13
A14 o o B14
A15 o o B15
A16 o o B16
A17 o o B17
A18 o o B18
A19 o o B19
A20 o o B20
A21 o o B21
A22 o o B22
A23 o o B23
A24 o o B24
A25 o o B25
A26 o o B26
A27 o o B27
A28 o o B28
A29 o o B29
A30 o o B30
A31 o o B31
A32 o o B32
GND
RESET
+5V
IRQ9
-5V
DRQ2
-12V
SRDY#
+12V
KEY
SMEMW#
SMEMR#
IOW#
IOR#
DACK3#
DRQ3
DACK1#
DRQ1
REFRESH#
BCLK
IRQ7
IRQ6
IRQ5
IRQ4
IRQ3
DACK2#
TC
BALE
+5V
OSC
GND
GND
IOCHK#
SD7
SD6
SD5
SD4
SD3
SD2
SD1
SD0
IOCHRDY
AEN
SA19
SA18
SA17
SA16
SA15
SA14
SA13
SA12
SA11
SA10
SA9
SA8
SA7
SA6
SA5
SA4
SA3
SA2
SA1
SA0
GND
080108 OPERATIONS MANUAL PCM-CFLASH-2 6
CFLASH Device 3.3V/5V Mode Selection
CFlash devices can operate on either 3.3 Volts or 5 Volts. Jumper J10 allows switching
between these two settings. When J10 = 1-2, the CFLASH2 is in 5 Volt operating
mode. 3.3 Volt mode is selected with J10 = 2-3. The default mode for the CFlash
device is 3.3V (J10 = 2-3). Unless the CompactFlash manufacturer recommends
otherwise, we suggest that you operate this device using 3.3V.
Visual
Index
1 2 3
o o o
J10
5 Volt Mode
1 2 3
o o o
J10
3.3 Volt Mode
(Default)
080108 OPERATIONS MANUAL PCM-CFLASH-2 7
PCM-CFLASH-2 Parts Placement Guide
080108 OPERATIONS MANUAL PCM-CFLASH-2 8
PCM-CFLASH-2 Parts List
ASSM ITEM FROM: PCM-CFLASH2-40-0 ASSM ITEM THRU: PCM-CFLASH2-40-0
PARENT LOC FROM: <FIRST> DEFAULT COMPONENT LOCATION: ARLIN PARENT LOC THRU: <LAST>
===================================================================================================================================
ITEM QTY
LVL ITEM KEY ITEM DESCRIPTION BOM COMMENT TYPE REQUIRED
===================================================================================================================================
PCM-CFLASH2-40-0 PC/104, 16-BIT, 0MB, TYPE 2 COMPACT PC/104, 16-BIT, 0MB, TYPE 2 COMPACT FL F 1.0
1 999-9999-001 SPECIAL NOTES 09/17/03 MEB ECO 03-48 I 1.0
1 999-9999-001 SPECIAL NOTES 04-23-03 MEB ECO 03-04 I 1.0
1 999-9999-001 SPECIAL NOTES 08-09-01 MEB ECO 01-37 I 1.0
1 999-9999-001 SPECIAL NOTES 05-23-01 MEB ECO 01-19 I 1.0
1 999-9999-001 SPECIAL NOTES 04/05/01 MEB (ATTACH ASSY'S TO FIN.GOODS) I 1.0
1 999-9999-001 SPECIAL NOTES SPECIAL NOTES I 0.0
1 0299-001-0000F ASSY CORE, TOP-SMT PCM-CFLASH2 REV.F F 1.0
2 999-9999-001 SPECIAL NOTES 09/17/03 MEB ECO 03-48 I 1.0
2 999-9999-001 SPECIAL NOTES 04-23-03 MEB ECO 03-04 I 1.0
2 999-9999-001 SPECIAL NOTES 08-09-01 MEB ECO 01-37 I 1.0
2 999-9999-001 SPECIAL NOTES 05-23-01 MEB ECO 01-19 I 1.0
2 999-9999-001 SPECIAL NOTES 03/20/01 MEB (REVA) I 1.0
2 999-9999-001 SPECIAL NOTES SPECIAL NOTES I 1.0
2 601-0103-503 RES 10K Ohm 5% 1/10W 0805 R1,R3 I 2.0
2 601-0271-503 RES 270 Ohm 5% 1/10w 0805 R2 I 1.0
2 603-1065-82D CAP 10uF 25v 20% TAN 6032 C1,C4 I 2.0
2 603-1047-803 CAP .1uF 50v 20% CER 0805 C2,C3 I 2.0
2 607-0006-005 LED, RED SMT Stanley Elec BR1112H-TR 3k D1 I 1.0
2 650-2003-0E0 HDR 1X3 2MM SMT SAMTEC (425 per reel) J5,J10 I 2.0
2 650-2050-0K1 HEADER, CFLASH TYPE 2 1.27MM .050"PITCH J4 I 1.0
2 650-0064-0CA CONN. PC/104, 64PIN STK THRU W/SOLDER J7A I 1.0
2 650-0040-0CA CONN. PC/104, 40PIN STK THRU W/SOLDER J7B I 1.0
2 125-0008-000 TRANSISTOR SI4947DY DUAL P-CHANNEL FET U1 I 1.0
2 670-0004-026 REGULATOR LT1963 3.3V U2 I 1.0
2 400-0299-000F PCB, C-Flash2 Rev F PCB, C-Flash2 Rev F I 1.0
-----------------------------------------------------------------------------------------------------------------------------------
SUB-ASSEMBLY TOTAL: 0299-001-0000F ARLIN - 18 Items
-----------------------------------------------------------------------------------------------------------------------------------
1 0299-040-0000F ASSY-THR-100MIL ADP/PCM-CFLASH2-XX REV.F F 1.0
2 999-9999-001 SPECIAL NOTES 09/17/03 MEB ECO 03-48 I 1.0
2 999-9999-001 SPECIAL NOTES 04-23-03 MEB ECO 03-04 I 1.0
2 999-9999-001 SPECIAL NOTES 08-09-01 MEB ECO 01-37 I 1.0
2 999-9999-001 SPECIAL NOTES 03/20/01 MEB (REVA) I 1.0
2 999-9999-001 SPECIAL NOTES SPECIAL NOTES I 0.0
2 201-0040-121 HDR 40 RA Aptos #LPHS-40R3-B-032-SP J2,J9 I 2.0
-----------------------------------------------------------------------------------------------------------------------------------
SUB-ASSEMBLY TOTAL: 0299-040-0000F ARLIN - 6 Items
-----------------------------------------------------------------------------------------------------------------------------------
1 0299-100-0000F SUB ASSY, ADP/PCM-CFLASH2 REV.F F 1.0
2 999-9999-001 SPECIAL NOTES 09/17/03 MEB ECO 03-48 I 1.0
2 999-9999-001 SPECIAL NOTES 04-23-03 MEB ECO 03-04 I 1.0
2 999-9999-001 SPECIAL NOTES 08-09-01 MEB ECO 01-37 I 1.0
2 999-9999-001 SPECIAL NOTES 05-23-01 MEB ECO 01-19 I 1.0
2 999-9999-001 SPECIAL NOTES SPECIAL NOTES I 0.0
2 201-0050-012 CARD EJECTOR, CFLASH TYPE 2 1.27MM .050" ADP-CFLASH=J3 -OR- PCM-CFLASH=J4 I 1.0
===============================================================================================================================
====
ASSM ITEM FROM: PCM-CFLASH2-40-0 ASSM ITEM THRU: PCM-CFLASH2-40-0
PARENT LOC FROM: <FIRST> DEFAULT COMPONENT LOCATION: ARLIN PARENT LOC THRU: <LAST>
===================================================================================================================================
ITEM QTY
LVL ITEM KEY ITEM DESCRIPTION BOM COMMENT TYPE REQUIRED
===================================================================================================================================
2 201-0002-005 JUMPER PLUG, 2MM Aptos MJ-P-045-B-50 J5=1-2 I 1.0
2 999-9999-001 SPECIAL NOTES J10=2-3 I 1.0
-----------------------------------------------------------------------------------------------------------------------------------
SUB-ASSEMBLY TOTAL: 0299-100-0000F ARLIN - 8 Items
-----------------------------------------------------------------------------------------------------------------------------------
1 KIT-PCM-STANDOFF-2 PC/104 STANDOFF KIT CONSISTING OF 2 LABEL, STATIC SENSITIVE 130-02 F 1.0
2 CONTRACT LABOR OUTSIDE CONTRACT LABOR L .1
2 999-9999-001 SPECIAL NOTES 04-28-95 MEB (NEW BOM) I 1.0
2 500-0200-091 SPACER M/F RAF 4000-440-N-MODL.600 SPACER M/F RAF 4000-440-N-MODL.600 I 2.0
2 500-0200-033 SCREW PPH 4-40 X 1/4" SCREW PPH 4-40 X 1/4" I 2.0
2 500-0200-092 NUT HEX NYLON 4-40 NUT HEX NYLON 4-40 I 2.0
2 525-0304-001 SIZE 3 COIN ENVELOPE 2.5" X 4.25" SIZE 3 COIN ENVELOPE 2 1/2 X 4 1/4 I 1.0
-----------------------------------------------------------------------------------------------------------------------------------
SUB-ASSEMBLY TOTAL: KIT-PCM-STANDOFF-2 ARLIN - 6 Items
-----------------------------------------------------------------------------------------------------------------------------------
1 910-0024-000 LABEL, STATIC SENSITIVE 130-02 LABEL, STATIC SENSITIVE 130-02 I 1.0
1 950-0001-000 BAG STATIC BARRIER 07-0610 6X10 BAG STATIC BARRIER 07-0610 6X10 I 1.0
1 500-0200-174 VINYL, PC-104 PROTECTIVE ESD CAP. VINYL, PC-104 PROTECTIVE ESD CAP. I 1.0
===================================================================================================================================
TOP ASSEMBLY TOTAL: PCM-CFLASH2-40-0 ARLIN - 13 Items
===================================================================================================================================
080108 OPERATIONS MANUAL PCM-CFLASH-2 9
Jumper Reference
For the convenience of the user, a copy of the Visual Index has been provided with
direct links to connector and jumper conguration data.
J7 PC/104
Interface
NOTE: The reference line to each component part has been drawn to Pin 1, where applicable.
Pin 1 is also highlighted with a red square, where applicable.
J5 Master/
Slave Mode
o 1
o 2
o 3
1 o o 2
3 o o 4
5 o o 6
7 o o 8
9 o o 10
11 o o 12
13 o o 14
15 o o 16
17 o o 18
19 o o 20
21 o o 22
23 o o 24
25 o o 26
27 o o 28
29 o o 30
31 o o 32
33 o o 34
35 o o 36
37 o o 38
39 o o 40
41 o o 42
43 o o 44
J6
Auxiliary
Power
Input
1 2 3 4
o o o o
J2, J9 IDE
Interface
1 o o 2
3 o o 4
5 o o 6
7 o o 8
9 o o 10
11 o o 12
13 o o 14
15 o o 16
17 o o 18
19 o o 20
21 o o 22
23 o o 24
25 o o 26
27 o o 28
29 o o 30
31 o o 32
33 o o 34
35 o o 36
37 o o 38
39 o o 40
J10 Voltage
Selection
o 1
o 2
o 3
J1, J8
Alternate
IDE
Interface
080108 OPERATIONS MANUAL PCM-CFLASH-2 10
LED
MA/SLV
GND
SD4
SD6
HDCS0
GND
GND
CFVCC
GND
GND
SA1
SD0
SD2
ENA
SD11
SD13
SD15
IOWR
HINT
MA/SLV
RS T
LED
SD8
SD10
SD3
SD5
IDED7
GND
GND
GND
GND
GND
SA2
SA0
SD1
IOCS16
ENA
SD12
SD14
HDCS1
IORD
CFVCC
IORDY
PDIAG
SD9
GND
RST
IDED7
SD6
SD5
SD4
SD3
SD2
SD1
SD0
IOWR
IORD
IORDY
HINT
SA1
HDCS0
SD8
SD9
SD10
SD11
SD12
SD13
SD14
SD15
BALE
IOCS16
HDCS1
SA2
LED
SA0
PDIAG
RST
IDED7
SD6
SD5
SD4
SD3
SD2
SD1
SD0
IOWR
IORD
IORDY
HINT
SA1
HDCS0
SD8
SD9
SD10
SD11
SD12
SD13
SD14
SD15
BALE
IOCS16
HDCS1
SA2
LED
SA0
PDIAG
GND
SD4
SD6
HDCS0
GND
GND
CFVCC
GND
GND
SA1
SD0
SD2
ENA
SD11
SD13
SD15
IOWR
HINT
MA/SLV
RST
LED
SD8
SD10
SD3
SD5
IDED7
GND
GND
GND
GND
GND
SA2
SA0
SD1
IOCS16
ENA
SD12
SD14
HDCS1
IORD
CFVCC
IORDY
PDIAG
SD9
GND
RS T
IDED7
SD6
SD5
SD4
SD3
SD2
SD1
SD0
IOWR
IORD
IORDY
HINT
SA1
HDCS0
SD8
SD9
SD10
SD11
SD12
SD13
SD14
SD15
BALE
IOCS16
HDCS1
SA2
LED
SA0
PDIAG
RST
IDED7
SD6
SD5
SD4
SD3
SD2
SD1
SD0
IOWR
IORD
IORDY
HINT
SA1
HDCS0
SD8
SD9
SD10
SD11
SD12
SD13
SD14
SD15
BALE
IOCS16
HDCS1
SA2
LED
SA0
PDIAG
CFACK
CFVCC
CFVCC
CFACK
ENA
CFVCC
SWVCC
SWVCC
CFACKCFACK
CFREQ
CFREQ
CFACK
CFACK
CFREQ
CFREQ
CFREQCFREQ
M3
PC104 MOUNT
499-9999-999
M2
PC104 MOUNT
499-9999-999
M4
PC104 MOUNT
499-9999-999
PC104 MOUNT
499-9999-999
M1
GND
DRAWN:
ENG:
"The Embedded PC Authority"
WinSystems, Inc
GND
201-0040-121
J2
28
30
32
34
36
38 37
35
33
31
27
29
39
40
16
18
20
22
24
26 25
23
21
15
17
19
5
3
1
7
9
11
1314
12
10
8
6
4
2
650-6004-0E0
J6
3
2
1
4
D1
607-0006-005
RED
R2
601-0271-503
270 5% 1/10W
U1
125-0008-000
SI9947DY
5
6
4
3
VCC
GND
VCC
GND
GND
GND
GND
GND
GND
GND
GND
650-2044-0H0
J1
2
4
6
8
10
12
14 13
11
9
7
1
3
5
19
17
15
21
23
2526
24
22
20
18
16
40
42
44
39
41
43
29
27
31
33
35
3738
36
34
32
30
28
201-0040-121
J9
28
30
32
34
36
38 37
35
33
31
27
29
39
40
16
18
20
22
24
26 25
23
21
15
17
19
5
3
1
7
9
11
1314
12
10
8
6
4
2
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
650-2044-0H0
J8
2
4
6
8
10
12
14 13
11
9
7
1
3
5
19
17
15
21
23
2526
24
22
20
18
16
40
42
44
39
41
43
29
27
31
33
35
3738
36
34
32
30
28
GND
GND
GND
GND
GND
GND
GND
VCC
GND
GND
GND
GND
GND
VCC
GND
GND
GND
GND
VCC
VCC
GND
VCC
GND
VCC
GND
VCC
GND
650-0104-0CA
PC104 STACKTHRU
J7
A10
IOCHRDYGND2
B10
AEN
A11
A12
SA19
A13
SA18
A14
SA17
A15
SA16
A16
SA15
A17
SA14
A18
SA13
A19
SA12
A20
SA11
A21
SA10
A22
SA9
A23
SA8
A24
SA7
A25
SA6
A26
SA5
A27
SA4
A28
SA3
A29
SA2
A30
SA1
A31
SA0
A32
GND
A9
SD0
A8
SD1
A7
SD2
A6
SD3
A5
SD4
A4
SD5
A3
SD6
A2
SD7
IOCHCK
A1
B9
+12V
B8
OWS
B7
-12V
B6
DRQ2
B5
-5V
B4
IRQ2
B3
+5V
B2
RESET
B1
GND1
B11
SMEMW
B12
SMEMR
B13
IOW
B14
IOR
B15
DACK3
B17
DACK1
B18
DRQ1
B16
DRQ3
B19
DACK0
B20
CLK
B22
IRQ6
B23
IRQ5
B24
IRQ4
B21
IRQ7
B25
IRQ3
B26
DACK2
B27
T/C
B28
BALE
B29
+5V1
B30
OSC
B31
GND3
B32
GND4
650-0104-0CA
PC104 STACKTHRU
J7
IRQ15
KEY
C19
SD15
C18
SD12
C15
SD14
C17
SD13
C16
SD11
C14
SD10
C13
SD9
C12
SD8
C11
MEMW
C10
GND
C0
SBHE
C1
LA23
C2
LA22
C3
LA21
C4
LA20
C5
LA19
C6
LA18
C7
LA17
C8
D0
GND1
MEMCS16
D1
IOCS16
D2
IRQ10
D3
IRQ11
D4
IRQ12
D5
D6
IRQ14
D7
DACK0
D8
GND3
D19
GND2
D18
MASTER
D17
VCC
D16
DRQ7
D15
DACK7
D14
DRQ6
D13
DACK6
D12
DRQ5
D11
D10
DACK5
C9
MEMR DRQ0
D9
1
GLOBAL FID
000-XXXX-FID
FID2
FID 1
GLOBAL FID
000-XXXX-FID
FID1
FID 1
GLOBAL FID
000-XXXX-FID
FID3
FID 1
GLOBAL FID
000-XXXX-FID
FID4
FID
J5
650-2003-0E0
3
2
1
J3
C-FLASH
650-2050-0K1
2
4
6
8
10
12
1413
11
9
7
1
3
5
19
17
15
21
23
25 26
24
22
20
18
16
40
42
44
46
48
5049
47
45
39
41
43
29
27
31
33
35
37 38
36
34
32
30
28
J4
C-FLASH
650-2050-0K1
2
4
6
8
10
12
1413
11
9
7
1
3
5
19
17
15
21
23
25 26
24
22
20
18
16
40
42
44
46
48
5049
47
45
39
41
43
29
27
31
33
35
37 38
36
34
32
30
28
603-1047-803
50v
.1uF
20%
C2
GND
VCC
10k 5%
1/10W
601-0103-503
R3
1
2
8
7
SI9947DY
125-0008-000
U1
VCC
650-2003-0E0
J10
3
2
1
20%
.1uF
50v
603-1047-803
C3
25v20%
10uF
603-1065-82D
C1
+
603-1065-82D
10uF
20% 25v
C4
+
670-0004-026
LT1963EST-3.3
2
1 3
U2
VIN
GND
OUT
04-58Added CFREQ/CFACK for DMA supportG
Disconnect pin 1 of J6D 03-04
MA = 1-2, SLV 2-3
Change Cflash hdr, Ma/Slv JmprB 01-19
N/AA Prototype
1 OF 1
(C) Copyright 2001 WinSysterms, Inc. All rights reserved.
Aug 31
2004
Jan 28
2003
S. Mottin
D. Long
G
400-0299-000G
C-FLASH 2
01-37C Change Cflash hdr
E Add .1uf to LED 03-15
F Added 3.3v Reg / Volt Select Jumper 03-48
PCM-CFLASH-2 Schematic Diagram
080108 OPERATIONS MANUAL PCM-CFLASH-2 11
Electrical
Power Requirements :See drive manufacturer’s user manual
Mechanical
Dimensions :3.6 in x 3.8 in x 0.6 in
PC-Board :FR-4 Epoxy Glass with 2-signal layers, plated through
holes and screened component legend
Jumpers :0.025 in square posts on 2 mm centers
Connectors :IDE I/O - IDH-40-LP
I DE I/O - STMM-122-02-G-D-SM-P-TR (Optional)
Power Input: 4-pin Molex (Optional)
P C/104-Bus: COMM CON 50711C-104G
Environmental
Operating Temperature :-40°C to +85°C using industrial drives
Non-condensing relative
Humidity :8% to 95%
Vibration :15 G Peak to Peak
Shock :2000 G Max.
(All parameters depend on media used.)
Specications
080108 OPERATIONS MANUAL PCM-CFLASH-2 12
WARRANTY REPAIR INFORMATION
WARRANTY
WinSystems warrants to Customer that for a period of two (2) years from the date of
shipment any Products and Software purchased or licensed hereunder which have been
developed or manufactured by WinSystems shall be free of any material defects and shall
perform substantially in accordance with WinSystems’ specications therefore. With respect
to any Products or Software purchased or licensed hereunder which have been developed or
manufactured by others, WinSystems shall transfer and assign to Customer any warranty
of such manufacturer or developer held by WinSystems, provided that the warranty, if any,
may be assigned. Notwithstanding anything herein to the contrary, this warranty granted by
WinSystems to the Customer shall be for the sole benet of the Customer, and may not be
assigned, transferred or conveyed to any third party. The sole obligation of WinSystems for
any breach of warranty contained herein shall be, at its option, either (i) to repair or replace
at its expense any materially defective Products or Software, or (ii) to take back such Products
and Software and refund the Customer the purchase price and any license fees paid for the
same. Customer shall pay all freight, duty, broker’s fees, insurance charges for the return of
any Products or Software to WinSystems under this warranty. WinSystems shall pay freight
and insurance charges for any repaired or replaced Products or Software thereafter delivered
to Customer within the United States. All fees and costs for shipment outside of the United
States shall be paid by Customer. The foregoing warranty shall not apply to any Products of
Software which have been subject to abuse, misuse, vandalism, accidents, alteration, neglect,
unauthorized repair or improper installations.
THERE ARE NO WARRANTIES BY WINSYSTEMS EXCEPT AS STATED HEREIN, THERE ARE NO
OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN NO EVENT
SHALL WINSYSTEMS BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF DATA, PROFITS OR GOODWILL.
WINSYSTEMS’ MAXIMUM LIABILITY FOR ANY BREACH OF THIS AGREEMENT OR OTHER CLAIM
RELATED TO ANY PRODUCTS, SOFTWARE, OR THE SUBJECT MATTER HEREOF, SHALL NOT
EXCEED THE PURCHASE PRICE OR LICENSE FEE PAID BY CUSTOMER TO WINSYSTEMS FOR
THE PRODUCTS OR SOFTWARE OR PORTION THEREOF TO WHICH SUCH BREACH OR CLAIM
PERTAINS.
WARRANTY SERVICE
1. To obtain service under this warranty, obtain a return authorization number. In the
United States, contact the WinSystems’ Service Center for a return authorization number.
Outside the United States, contact your local sales agent for a return authorization number.
2. You must send the product postage prepaid and insured. You must enclose the products
in an anti-static bag to protect from damage by static electricity. WinSystems is not responsible
for damage to the product due to static electricity.
/
