Porter POWERMAX VERTICAL JUMP TRAINER Assembly Instructions

Brand
Porter
Model
POWERMAX VERTICAL JUMP TRAINER
Type
Assembly Instructions

Porter POWERMAX VERTICAL JUMP TRAINER is an innovative device designed to accurately measure vertical jump height and provide valuable insights for athletes and fitness enthusiasts. With its precise and reliable measurements, the trainer enables users to track their progress over time and identify areas for improvement.

The trainer's versatility allows for various jump styles, including natural standing jumps, one or two-step jumps, and full-speed running jumps. It accommodates a wide range of jump-reach capabilities, ensuring suitability for individuals of varying athletic abilities.

The easy-to-use design facilitates efficient data collection, allowing users to quickly capture jump reach measurements and calculate NET vertical jump (distance jumped vs standing reach). This information is crucial for assessing athletic performance and making informed training decisions.

Porter POWERMAX VERTICAL JUMP TRAINER is an innovative device designed to accurately measure vertical jump height and provide valuable insights for athletes and fitness enthusiasts. With its precise and reliable measurements, the trainer enables users to track their progress over time and identify areas for improvement.

The trainer's versatility allows for various jump styles, including natural standing jumps, one or two-step jumps, and full-speed running jumps. It accommodates a wide range of jump-reach capabilities, ensuring suitability for individuals of varying athletic abilities.

The easy-to-use design facilitates efficient data collection, allowing users to quickly capture jump reach measurements and calculate NET vertical jump (distance jumped vs standing reach). This information is crucial for assessing athletic performance and making informed training decisions.

TA205 - VERTICAL JUMP TRAINER
assembly instructions
All rights reserved
Copyright 2022 by PowerMax
c
Page 1 of 4 TA205 INST
2/10/2022
Vane Frame
Upper Shaft
Adjustment Knob
Adjustment Knob
Adjustment Knobs
Lower Shaft
Base
ALIGNMENT & CALIBRATION
ASSEMBLY
Your Vertical Jump Trainer has been carefully crafted
to give you a precise and reliable measurement as
long as:
The unit is properly aligned to the floor
The base height is calibrated appropriately
The adjustment knobs are tightened
1. Place base on flat, level ground
2. Place Lower Shaft into chimney of the Base.
Use Adjustment Knobs to tighten in place.
3. Place Upper Shaft into the Lower Shaft.
Use Adjustment Knob to tighten in place.
4. Place Vane Frame into Upper Shaft.
Use Adjustment Knob to tighten in place.
SAFETY CONSIDERATIONS
Do not leave unit out where it can be used by individuals who have not been trained on how to properly
use the unit.
It is prohibitted for more than one individual to jump/approach at a time.
Users must have proper footwear and ensure surface around is safe to jump and clear of any/all objects
that may injure the jumper.
MOVING/STORAGE
The Vertical Jump Trainer has been designed to be easily moved while fully assembled by tipping the
unit backwards onto the wheels. For long-term storage, disassembly is recommended as to protect from
general wear and tear.
When storing the Vane Frame, it is recommended to turn the colored vanes back into the frame to
prevent damage. For long-term storage, place Vane Frame back in original carton.
TA205 - VERTICAL JUMP TRAINER
assembly instructions
All rights reserved
Copyright 2022 by PowerMax
c
Page 2 of 4 TA205 INST
2/10/2022
HOW TO READ HEIGHT SCORES
Knowing the bottom vane height, and remember the vane color code will help speed up the process.
Red & Blue Vanes - Full Inches, with Red Vanes being every 6th inch
White Vanes - Half Inches
Example: A bottom-vane height of 9 feet, and one higher red, three blue, and one white vanes
displaced, the score would be 9’-9 1/2”.
When figuring NET vertical jump, you may find it easier to convert both standing and jump reach into
inches for easy subtraction.
HOW TO USE
1. To measure maximum jump reach and calculate NET vertical jump (distance jumped vs standing
reach), take standing measurement first. If testing many people at once, consider using a nearby wall
and tape measure.
2. For less variation and more accurate results, two-handed measurement of the standing reach is
recommended .
3. Ensure the athlete is warmed up before jumping. Proper calisthenics and stretching is recommended.
4. Position the PowerMax so the outer edge of the target vanes are marked at right angles by floor
stripes or tape. This will be the approach line for the athletes to follow.
5. Conventional jump tests can be natural standing jumps, one or two-step jumps, or full-speed running
jumps. Other unique jump styles can also be conducted.
6. The 24-inch PowerMax Vane Frame span can usually be positioned at a height that will accomodate
most, if not all jump-reach capabilities. If testing a group, adjust the shafts so that the bottom vane
height will accommodate the lowest jumper(s), because it is normally preferable to have to raise the
unit to accommodate someone better than the general group, than vice versa.
7. With all vanes exteneded and aligned, instruct each jumper to make one preliminary jump and gently
tap forward a few vanes marking his/her approximate jump reach. Then, while jumper waits, use a
reset tool to push all the vanes, up to and including the highest touched vane, out of the way.
8. Following the preliminary jump, allow the jumper to make a specified number of jumps to better their
mark, or allow to continue until they cannot touch any higher vanes in two successive attempts. No
need to reset vanes inbetween attempts.
TA205 - VERTICAL JUMP TRAINER
All rights reserved
Copyright 2022 by PowerMax
c
Page 3 of 4 TA205 INST
2/10/2022
NAME
Bib #, Affiliation Pass/Fail
Height
inches
BEST MARK
PLACE
TA205 - VERTICAL JUMP TRAINER
All rights reserved
Copyright 2022 by PowerMax
c
Page 4 of 4 TA205 INST
2/10/2022
NAME
Bib #, Affiliation Pass/Fail
Height
inches
BEST MARK
PLACE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Porter POWERMAX VERTICAL JUMP TRAINER Assembly Instructions

Brand
Porter
Model
POWERMAX VERTICAL JUMP TRAINER
Type
Assembly Instructions

Porter POWERMAX VERTICAL JUMP TRAINER is an innovative device designed to accurately measure vertical jump height and provide valuable insights for athletes and fitness enthusiasts. With its precise and reliable measurements, the trainer enables users to track their progress over time and identify areas for improvement.

The trainer's versatility allows for various jump styles, including natural standing jumps, one or two-step jumps, and full-speed running jumps. It accommodates a wide range of jump-reach capabilities, ensuring suitability for individuals of varying athletic abilities.

The easy-to-use design facilitates efficient data collection, allowing users to quickly capture jump reach measurements and calculate NET vertical jump (distance jumped vs standing reach). This information is crucial for assessing athletic performance and making informed training decisions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents