2. Computers & electronics
  3. TVs & monitors
  4. LCD TVs
  5. Denson
  6. 19LEDCACI

Denson 19LEDCACI User manual

  • Hello! I am an AI chatbot trained to assist you with the Denson 19LEDCACI User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
LED TV with DVB S2 CA CI,
DVB T CI, DVD Loader and
Sound Bar
Before connecting, operating or adjusting this product, please read these instructions
completely. Please keep this manual for future reference
(All pictures used in this manual are only for illustration purpose. Those pictures may be different from the actual TV unit.)
USER MANUAL 19LEDCACI
Powered by SD Electronics 1
Important Safety Instructions:
The Lightning flash with the arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of un-insulated
"DANGEROUS VOLTAGE " within the product's enclosure that may be
of sufficient magnitude to constitute a risk or electric shock to
persons.
The Exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing instructions in the literature accompanying the product).
Read Instructions
All the safety and operating instructions should be read before the product is operated.
Retain Instructions
The safety and operating instructions should be retained for future references.
Heed Warnings
All Warnings on the product and in the operation instructions should be adhered to.
Follow Instructions
All Operating and user instructions should be followed.
Cleaning
Unplug this product from the wall outlet before cleaning. DO NOT use liquid cleaners or
aerosol cleaners. Use damp Cloth for cleaning.
Attachments
DO NOT use attachments not recommend by the product manufacturer they may cause
hazard.
Mounting
DO NOT place this product on an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table recommended by the
manufacturer or sold with the product. Any mounting of this product should follow the
manufacture's instructions, and should use a mounting accessory recommended by the
manufacturer.
Powered by SD Electronics 2
Important Safety Instructions Continued
Heat
The Product should be situated away from heat source such as radiators, heat registers, stoves
or other products (including amplifiers) that produce heat.
Object and Liquid Entry
Unit should not be exposed to liquids of any kind.
Don't place the unit on an uneven surface. Make sure it is at least 6inches from the wall.
Don't step or put heavy materials on top of the unit.
Do not place unit in confined spaces such as a bookcase.
DO NOT use this product near water. For example: Avoid placing it near bathtub,
Washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
Cabinet Slots
NEVER push objects or any kind into the unit through the cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. NEVER
spill liquid of any kind on the product.
Ventilation
DO NOT block any ventilation openings. Install in accordance with manufacture's instructions.
Slots and openings in the cabinet and the back and bottom are provided for ventilation, and to
ensure reliable operation of the product and to protect it from Overheating. These openings
must NOT be blocked or covered. There should be at least 15cm of space from these openings.
The openings should never be blocked by placing the unit on a bed, rug or other similar
surface. This product should NOT be placed in a built-in installation such as a bookcase
unless proper ventilation is provided.
Grounding or Polarization
This product may be equipped with a polarized alternating current line plug (a plug having
one blade wider then the other). This plug will fit the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete
outlet. DO NOT defeat the safety purpose of the polarized plug.
Outdoor Antenna Grounding
Protect the power cord from being walked on or pinched, particularly at plugs, outlets, and the
point where they exit from the unit.
Only use attachments or accessories specified by the manufacturer.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete
outlet. DO NOT defeat the safety purpose of the polarized plug.
Powered by SD Electronics 3
Important Safety Instructions Continued
Power Cord Protection
Protect the power cord from being walked on or pinched, particularly at plugs, outlets, and the
point where they exit from the unit. If the mains plug should fails to fit, contact your
electrician to replace your obsolete outlet. DO NOT defeat the safety purpose of the polarized
plug.
Power Sources
This product should be operated only from the type of power source indicated on the rear
panel. If you are not sure of the type of power supply to your home consult your product
dealer or local power company.
Lightning
For added protection for this product during a lightning storm, or when it is left unattended
and unused for a long period of time, unplug it from the outlet and disconnect the antenna or
cable system. This will prevent damage to the product due to lightning and power-line surges.
Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits, as contact with them might be fatal.
Overload
DO NOT overload wall outlets, extension cords or integral convenience receptacles as this can
result in a risk of fire or electric shock.
CAUTION
Danger of explosion if remote battery is incorrectly replaced. Replace only with the same or
equivalent type.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Batteries are not for domestic waste. Exhausted batteries must be returned to the business or
local authorities.
WARNING
Excessive sound pressure from earphones and headphones can cause hearing loss.
An apparatus with CLASS I construction shall be connected to a mains socket outlet with a
protective earthing connection.
DISCONNECTION FROM THE MAINS SUPPLY
The appliance coupler is used as disconnect device. Please note that the disconnect device
remains readily operable.
Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions.
If the LCD Screen has been smashed or damaged in any way
When the power-supply cord or plug is damaged.
Important Safety Instructions Continued
If liquid has been spilled, or objects have fallen into the product.
Powered by SD Electronics 4
If the product has been exposed to rain or water.
If the product does not operate normally after following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper
Adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the product to its normal operation.
If the product has been dropped or damaged in any way.
When the product exhibits a distinct change in performance- this indicates a need for
service.
Replacement parts
When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part.
UNAUTHORIZED substitution may result in fire, electric shock or other hazards.
Safety Check
Upon completion of any service or repair to this product, ask the service technician to perform
safety checks to determine that the product is in proper operating condition.
Storage
Store LCD TV in a dark room at room temperature and low humidity in the original packing
condition, to avoid condensation that may cause failure.
Handling
Since the LCD TV consists of glass and precise electronic components, it will be damaged by
excessive shock or drop. Please handle the LCD TV carefully to minimize shock during
transportation.
Recycling
This product utilizes lead free solder, and has a fluorescent lamp containing a small amount of
mercury. Disposal of these materials may be regulated in your community due to
environmental considerations. For disposal or recycling information please contact you local
authorities, or the Electronics Industries Alliance: http://www.eiae.org/
This product bears the selective sorting symbol for waste electrical and electronic equipment
(WEEE). This means that this product must be handled pursuant to European
Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact
on the environment. For further information, please contact your local or regional
authorities. Electronic products not included in the selective sorting process are
potentially dangerous for the environment and human heath due to the presence of
hazardous substances.
Warning symbol for candle flame accessible area
Do not attach candle to accessible opening area, to avoid flammable
foreign material from entering the TV.
Powered by SD Electronics 5
CONTENT: Page
1. Introduction 9
1.1 Product description 9
1.2 Product features 9
1.3 Package contents 10
2. System Set up 11
2.1 Front Panel Touchpad & Remote Control Function 11
2.2 Remote Control 12
2.2.1 Remote Control Battery Installation / Removal 14
2.2.2 Remote Control Operating Instruction 14
2.3 Connectivity TV Set 15
3. First Time Installation 16
3.1 Basic Operation 16
4. DVB-S2 CACI Satellite receiver Modus 16
4.1 Use of the USB port of the DVB-S2 receiver 16
4.2 PVR Possibilities of the DVB-S2 receiver 16
4.2.1 USB basic operation 16
4.2.2 USB setting 17
4.2.3 PVR setting 17
4.2.4 Play Files 17
4.3 PVR 18
4.4 USB Software Upgrade of the DVB-S2 receiver 19
5. Source Operating instructions of the LED TV 19
6. OSD Language settings 20
7. DVB-T CI Receiver Modus (=DTV) 21
7.1 Channel Menu 21
7.1.1 Auto Tuning 21
7.1.2 DVB-T Manual Tuning 21
7.1.3 ATV Manual Tuning 21
7.1.4 Program setting 22
7.1.5 Signal Information 22
7.1.6 CI Information 23
7.2 Picture Menu 23
7.2.1 Picture mode 23
7.2.2 Contrast 23
7.2.3 Brightness 24
7.2.4 Colour 24
7.2.5 Tint 24
7.2.6 Sharpness 24
7.2.7 Colour temp 24
7.2.8 Noise Reduction 24
7.2.9 Dynamic CR 25
Powered by SD Electronics 6
7.3 Sound Menu 25
7.3.1 Sound Modus 25
7.3.2 Treble 25
7.3.3 Bass 25
7.3.4 Balance 26
7.3.5 Auto Volume 26
7.3.6 Surround Sound 26
7.3.7 AD Switch 26
7.3.8 EQ (Equalizer) 26
7.4 Time Menu 27
7.4.1 Clock 27
` 7.4.2 Time Zone 27
7.4.3 Sleep Timer 27
7.4.4 Auto Standby 27
7.4.5 OSD Timer 28
7.5 Lock Menu 28
7.5.1 Lock System 28
7.5.2 Password setting 29
7.5.3 Block Program 29
7.5.4 Parental Lock 30
7.5.5 Key Lock 30
7.6 Set up Menu 30
7.6.1 OSD Language setting 30
7.6.2 Teletext Languagel 30
7.6.3 Impaired hearing 31
7.6.4 PVR File System 31
7.6.5 Aspect Ratio 32
7.6.6 Blue screen 32
7.6.7 Reset 32
8. PC Mode OSD Operation 33
8.1 Picture Menu 33
8.1.1 Auto adjustment 33
8.1.2 H-Offset 33
8.1.3 V-Offset 33
8.1.4 Size 33
8.1.5 Phase 33
8.1.6 Position Reset 33
8.2 Picture Menu 33
8.3 Sound Menu 34
8.4 Time Menu 34
8.5 Parental lock 34
8.6 Set up Menu 34
9. AV/SCART/HDMI OSD Operation 34
Powered by SD Electronics 7
9.1 Picture Menu 34
9.2 Sound Menu 34
9.3 Time Menu 34
9.4 Parental lock 34
9.5 Set up Menu 34
10.Media OSD Operation 35
10.1Photo Menu 35
10.2 Music Menu 36
10.3 Movie Menu 37
10.4 Text Menu 38
11. DVD Operation 39
11.1 Basic Operation 39
11.2 DVD settings / DVD menu settings 39
11.3 DVD Picture Menu 39
11.4 Sound Menu 41
11.5 Time Menu 41
11.6 Parental Menu 41
11.7 Set up Menu 41
12. Reference 42
12.1 Screen cleaning 42
13. Trouble Shooting 43
Powered by SD Electronics 8
Powered by SD Electronics 9
1. INTRODUCTION
Product Description
Thank you for choosing the DENSON 19LEDCACI TFT/LED Colour TV / HD Satellite Receiver / DVB-T Receiver / DVD /
Monitor and for your continued support and use of our products.
The product combines the features of a TV / DVB-S-S2 HD Satellite receiver / DVB-T H.264 MPEG2 receiver / DVD
Player and PC Monitor with a THIN FILM TRANSISTOR liquid crystal A-grade display (TFT-LED).This new generation of
TFT-LED incorporates a high quality display in a lightweight module.
As such the unit has power-saving capabilities and emits no X-ray radiation. There are many benefits from this TFT-LED
namely comfort, safety, and environmental protection.
. The product features a color-active matrix, Thin-Film-Transistor (TFT) LED to provide superior display performance. A
maximum resolution is ideal for displaying complex graphics and high definition images from your computer. Other
outstanding features include freedom from video oscillations and selection of various choices of digital video and audio
signal inputs
You will get the feeling that the large-sized surface of operation & high-quality stereo speakers provides a coherent,
top-of-the-line Audio and Video systems for viewing pleasure. In addition the TFT-LED display allows "Plug & Play"
connection to your PC and has a built-in On Screen Display (OSD) functions that can operate from the convenience of a
remote control.
Product Features
High-resolution LED A-Grade panel.
Build in DVB-S2 CACI HD/SD satellite receiver with Smartcard reader and CI Slot.
Build in DVB-T H.264 MPEG2 receiver with CI Slot for FTA and encrypted DVB-T TV & Radio channels.
Build in DVD Player of High Quality.
Build in Soundbar with 4 x 8Watt speakers for excellent sound.
TFT-LED screen connected with Computer support for “Plug & Play” compatibility.
Super-low power consumption, 50% more power saving than conventional TV.
TELETEXT functions are supported.
Multi-digital input terminal provides a host of video and audio choices.
Component ( HD ) inputs for high-quality pictures.
Slim space-saving feature of up to 70% compared with a normal CRT monitor.
Wall-mountable design. ( VESA standard )
Note: Designs, features and specifications are approximate and subject to change without notice
Powered by SD Electronics 10
Package Contents
Please check the Package to make sure it contains the following items:
TFT LCD Remote Control
EU Power Cord ADAPTER
THIN & FLEXIBLE
50cm coax cable with mounted
2 x Male F-connectors and 1 x
Female/Female Fconn. Adapter
UNIVERSAL AUTO CIGARETTE
LIGTHER PLUG LINE
QUICK INSTALLATION
GUIDE USER MANUAL
(All pictures used in this manual are only for illustration purposes. Those pictures may be different from the actual.)
2. SYSTEM SETUP
USER
MANUAL
QUICK
INSTALLATIO
N
GUIDE
Powered by SD Electronics 11
2.1.Front Panel Touchpad & Remote Control Function
Item
Function Discription
1 IR Remote IR Sensor (Receives IR signal from remote Control)
2 LED Red - Stand by, Green- Operating
3 POWER Turn on/off TV
4 SOURCE Call out the input source selection interface.
6 MENU Display the main menu on screen; go to the previous level of OSD.
6 - CH + Decrease TV channel/ Increase TV channel.
7 - VOL+ Decrease volume; Increase volume;.
8 ■ DVD mode STOP.
9 ►II DVD mode Play/Pause.
10 EJECT DVD mode eject disc
(All pictures used in this manual are only for illustration purposes. Those pictures may be different from the actual.)
Powered by SD Electronics 12
2.2 Remote Control：
：：
：
1
POWER: Standby mode turn on/off.
2
(Mute): Turn volume off/on.
3 SLEEP: To setup power-off timer.
4
ZOOM:
to select the screen display aspect
ratio.
5 LANG/AUDIO: To select language and audio
channel for ATV and DTV
6
TV/RADIO
:
Switch between TV and radio
channels in DTV mode.
7
NUMBER BUTTONS: Press 0-9 select a TV
channel directly when you are watching TV.
The channels change after 2 seconds. To enter
page number in Teletext mode.
8
-
/
--
: No function.
9 RECALL: Recalls the last channel viewed.
10
TURN : Picture turn.
11
INDEX: Go to the index page in Teletext mode.
12
AUD-ONLY:
13
FAV: Press the FAV button to Open the
Favorite list.
14
FAV+: Press FAV+ to go to next channel in the
Favorite list
15
FAV-: Press FAV- to go to previous channel in
the Favorite list.
16
REVEAL:
To reveal the hidden words in
Teletext mode.
17
DISPLAY: To display the source and channel’s
info.
18
PMODE: Press repeatedly to cycle through the
available picture modes.
19
SMODE: Press to cycle through the different
sound preset settings.
20
SUBPAGE: To display a sub-page of the
selected page in Teletext.
21
EPG: Electronic Program Guide.
22
SOURCE: call out sources interface for fast
source switching.
23
THUMBSTICK (▲/▼/◄/►): Allows you to
navigate the on-screen menus and adjust the
system settings for your reference.
OK/CH-List: Use to confirm menu selection,
as ENTER at TV model show the channel list.
24
MENU: Display the main menu on screen. Go
to the previous level of OSD.
25
EXIT: To exit from OSD.
26
CH+/-: Channel up/down function.
27
DVD MENU
:
In DVD mode display the disc
menu.
28
DVD SETUP:. In DVD mode setup the OSD
menu.
29
: Press to increase / decrease the
volume level.
30
◄◄
:
Reverse function for USB media mode
and DVD mode.
Powered by SD Electronics 13
31
►►: Fast forward for USB media mode and
DVD mode.
32
I
◄◄
:
To playback previous chapter for USB
media mode and DVD mode.
33
►►
I: To advance forward to the next chapter
for USB media mode and DVD mode.
34
►II: Press to play or pause for USB media
mode and DVD mode.
■：In USB mode and DVD mode Stop.
35
●
●●
● : Recorder at DVB-T mode.
36
EJECT: In DVD mode eject disc.
37
RED Code:
Use for Teletext/OSD menu red
color coded function..
PROG：
：：
：In DVD mode display the program.
38
GREEN Code:
Use for Teletext/OSD menu
green color coded function.
ANGLE: In DVD mode turn angle for the disc
have angle.
39
YELLOW Code:
Use for Teletext/OSD menu
yellow color coded function.
TITLE：
：：
：In DVD mode change the title have in
the disc.
40
BLUE Code: Use for Teletext/OSD menu blue
color coded function.
A-B：
：：
：In USB mode and DVD mode repeat A-B。
Powered by SD Electronics 14
2.2.1. Remote Control Battery Installation / Removal
CAUTION !!
Avoid damaging the Remote Control by NOT:
Applying excessive pressure when pressing buttons
Exposing to extreme Low or High temperatures
Exposing to excessive Moisture
Mishandling to Dropping
2.2.2. Remote Control Operating Instruction:
The Remote Control Transmission consists of an Infrared (IR) Signal.
Make sure the line-of-sight between Remote Control and clear of objects that could interfere with the remote IR signal.
Always point the Remote Control directly towards the sensor.
Powered by SD Electronics 15
2.3. Connectivity TV SET:
Right Side:
Linkerkant:
Left Side:
1. LNB-IN DVB-S2
2. CI Slot DVB-S2, behind a detachable cover
3. Smartcard reader DVB-S2
4. USB input of the DVB-S2 receiver
5. DVD Slot
Powered by SD Electronics 16
3. First Time Installation
After you have installed the satellite Dish or DVB-T antenna you switch the TV set On with the ON/OFF switch at the right
side of the TV set.
Press Power button on the remote control. The Power indicator instantaneously changes from red to green.
3.1 Basic Operation:
− Press LCD-MENU button to display the MAIN OSD MENU;
− Press ◄ / ► button to switch through the different OSD menu, e.g. Channel, Picture, Sound, Time,
Lock, Setup Menu. (The available menu will be different depends on current source mode selected).
− Press OK button or ▼ / ▲ button to enter the sub menu;
− Press ▼ / ▲ button to select the entry/option, then press OK button or ► button to enter the sub
menu to adjust the value of selected entries;
You can press LCD-MENU to return back to the previous menu, or press EXIT button to exit the entire OSD
menu completely
4. DVB-S2 CACI Satellite Receiver Modus:
The default setting of the TV set is in DVB-S_S2 Modus. After switching ON the TV, you will come in the Language Menu
of the DVB-S2 satellite receiver. For Dutch and Belgium viewers of Canal Digital / TV Vlaanderen or TeleSat providers,
you can follow the instructions on the Quick Installation Guide, to download the corresponding channels with the
FastScan application. You can view your favourite channels in a few minutes.
4.1 Use of the USB port of the DVB-S2 receiver:
The USB input of the DVB-S2 receiver you find at the LEFT side of the TV set, this USB port has different possibilities:
1. PVR features ( Record / Playback etc… ) 2. Software Upgrade feature.
4.2 PVR Possibilities of the DVB-S2 receiver:
Go in DVB_S2 mode to MENU > EXTRA > USB and push the OK button.
With the USB you can play many kinds of media files, you can record program and playback it and you can do various
operations when using USB HDD or USB disk.
Note: It supports FAT, FAT32 and NTFS format USB disk or USB HDD.
4.2.1. USB Basic Operation
1. Tool
In USB menu, you can press the RED button to select Rename/Delete/Move To/Copy To/Lock File/Sort the folders and
files. And also can create the new folders and format the disk.
2. Upload
You can press the YELLOW button to upload data/channel/all to USB. And also can upload the files to FTP.
4.2.2. USB Settings
Powered by SD Electronics 17
1. Play Mode
Press the GREEN button to set the play mode. It include the Loop, Slide Show Interval and Photo View Mode options.
4.2.3. PVR Setting
Press the BLUE button to enter the PVR Setting menu. In this menu, you
can set the options of Record Partition, Record Mode, Record Type,
Record Time,
Auto Timeshift, Timeshift Buffer Size, Timeshift Need Save
and Play Start Pos
4.2.4. Play Files
1. Music
1) Press the VOL+/VOL- to highlight the Music.
2) Press the CH+/CH- to change the folder or file and press the OK button to open the folder or play the music file. It
supports *.mp3, *.ogg, *.wav and *.flac format music files.
OK: Play the selected file.
CH+/CH-: Change the highlighted item.
: Play the file.
■ : Stop playing file.
I: Play the previous file.
I: Play the next file.
: Fast rewind.
: Fast forward.
PAUSE/||: Pause.
VOL+/VOL- : Adjust volume.
EXIT: Exit playing state and return to file list menu.
2. Photo
1) Press the VOL+/VOL- to highlight the Photo.
2) Press the CH+/CH- to change the folder or file and press the OK button to open the folder or play the picture. It
supports *.bmp, *.jpg, and *.gif format photos.
Tip
: You can press the Green button to go to Play Mode Set the Photo View Mode state on Full Screen, 2x2
Thumbnail or 2x3 Thumbnail in the USB menu. The picture followed is 2x2 Thumbnail mode.
OK: View the photo.
CH+/CH-/VOL+/VOL-: Highlighted the previous/next photo when photo view mode is 2x2 Thumbnail or 2x3 Thumbnail.
VOL+/VOL- button also can rotate the picture when photo display of full screen.
I: Play the previous file.
I: Play the next file.
PAUSE/||: Pause.
ZOOM: Zoom in pictures, the zooms change as follows: x1 ->x2->x4 ->x8 ->x16 ->x1.
EXIT: Exit the current menu.
Powered by SD Electronics 18
3. Movie
1) Press the VOL+/VOL- to highlight the Movie.
2) Press the CH+/CH- to change the folder or file and press the OK button to open the folder or play the movie file.
It
supports *.3GP, *.AVI,*.MKV, *.MP4, *.MOV, *.MPG, *.TS, *.M2TS, *.DAT, *.VOB format movie files.
OK: View play list or play the highlighted file in the play list.
: Play the file.
PAUSE/||:Pause.
■: Stop playing file.
: Fast rewind.
: Fast forward.
I: Play the previous item.
I: Play the next item.
INFO: Display the playing progress. In this menu, press the INFO button again to display the file’s detail information.
AUDIO: Set the audio language.
SUB: If the file has subtitle, press the SUB button can change the subtitle.
VOL+/VOL- : Adjust volume.
Find&(0-9): Jump to position as you like.
ZOOM: Zoom in pictures, the zooms change as follows: x1 ->x2->x4 ->x8 ->x16 ->x1.
EXIT: Exit the current menu.
4.3. PVR
1) Press the VOL+/VOL- to highlight the PVR.
2) Press the CH+/CH- to change the folder or file and press the OK button to open the folder or play the PVR file.
You can playback the files you recorded. And the recorded files are saved in folder named ALIDVRS2.
OK: View play list or play the highlighted file in the play list.
: Display playing progress.
PAUSE/||: Pause or Step.
■: Stop playing file.
: Fast rewind.
: Fast forward.
I: Play the previous item.
I: Play the next item.
INFO: Display playing progress. In this menu, press the INFO button again to display the EPG information.
AUDIO: Set the audio language.
SUB: If the file has subtitle, press the SUB button can change the subtitle.
TXT：If the file has teletext, press the TXT button can display the teletext.
Find&(0-9): Jump to the valid time that you input.
VOL+/VOL-: Jump to forward or rewind of a time interval when info bar display.
Λ: Mark on current time when info bar display.
V: Jump to mark when info bar display.
EXIT: Exit the current menu.
5. Play List
You can play the movie/photo/music/PVR files in the Play List.
1) In the USB Menu highlight a movie/ photo/music/PVR file and press
the FAV button to mark it, then press the GREEN button to enter the Play
List menu, you will see the files marked included in play list.
2) In the movie/ photo/music Play List, press FAV key to add the all
available files to the Play List. (Just according to the help information)
3) In the movie/ photo/music Play List, highlight the movie/photo/music file
Powered by SD Electronics 19
and press the Red button to mark it, then move it to the destination press OK to confirm, then you can move the marked
file to destination.
4) Press the GREEN button set the Play Mode.
5) Press Yellow key to delete highlighted file from Play List.
6) Press the BLUE button to delete all files from Play list.
4.4. USB Software Upgrade of the DVB-S2 receiver:
4.4.1. How to upload new firmware / upgrade file and the instructions:
You have to use the USB port at the right side of the TV SET !!! ( of the DVB-S2 receiver )
you have to upload the new software from your PC into a USB stick.
Push the MENU button to enter the MAIN MENU of the DVB-S2 receiver..
Use the ▼ button to go to the submenu EXTRA and push the OK button.
Select USB and push the OK button > The menu shows you the software upgrade file on the USB stick.
Select the file and push the OK, you will see the next message > " Do you want to upgrade the software/ database? “
Below that you see “ NO “ selected standard. With use of the
◄ / ►
you can change “ NEE “ into “ JA “.
If selected “ YES “ , push the OK button and the Software Upgrade starts.
NOTE !! Don’t interrupt the upgrade progress..If upgrade is ready, the DVB-S2 will re-start automatically.
4.4.2 Software/Firmware uploaded:
As soon as the upgrade is ready, you have to do a " Factory Reset " !!!
Push the "MENU" button and go to “INSTALLATION”. Push on the
►
button.
You have high lighted " FastScan " . Push 1 x on the
▼
button and you have high lighted " Factory Reset " .
Push 2 x on the OK button. You will see the message > WARNING, if selected “ YES “ all data and your settings will be
deleted. Are you sure you want to continue ?
Select “YES “ and push the O button.
After the DVB-S2 receiver has re-started, the new software will be active.
5. Source Operating Instructions of the LED TV:
If you want to view DVB-T channels or Digital TV (DTV= DVB-T) or Analogue TV (ATV) from the
cable instead of DVB-S2 satellite channels, you have to press “ SOURCE " on remote control to
select the desired source. You will see next screen:
6. OSD Language settings:
/