Saab 400 101 754 Installation Instructions Manual

Type
Installation Instructions Manual

This manual is also suitable for

Saab 400 101 754 is a door-mounted loudspeaker kit designed for use with Saab 900 M94- and Saab 9-3 vehicles. This kit includes all the necessary components to install a pair of loudspeakers in the front doors of your vehicle, providing you with an enhanced audio experience. The kit includes two loudspeakers, an amplifier, screws, a DIN cable, and a wiring harness. The loudspeakers are designed to fit into the factory speaker locations in the front doors, and the amplifier is designed to be mounted under the dashboard.

Saab 400 101 754 is a door-mounted loudspeaker kit designed for use with Saab 900 M94- and Saab 9-3 vehicles. This kit includes all the necessary components to install a pair of loudspeakers in the front doors of your vehicle, providing you with an enhanced audio experience. The kit includes two loudspeakers, an amplifier, screws, a DIN cable, and a wiring harness. The loudspeakers are designed to fit into the factory speaker locations in the front doors, and the amplifier is designed to be mounted under the dashboard.

Saab 900 M94-, Saab 9-3
900Monteringsanvisning
SCdefaul t
MONTERINGSANVISNING
·
INSTALLATION INSTRUCTIONS
MONTAGEANLEITUNG
·
INSTALLATIONS DE MONTAGE
SITdefault
Saab 900 M94-, Saab 9-3
Door-mounted loudspeaker kit
1 Loudspeaker
2 Amplifier
3 Screw (6x)
4 Screw (3x)
5DIN cable
6 Wiring harness (purchased separately)
LHD 400 103 313
RHD 400 103 321
7 Cable tie (4x)
Accessories Part No. Group Date Instruction Part No. Replaces
400 101 754
400 101 911 3:67-28 Jul 99 45 18 510
75 05 47 Dec 93
44 89 829 Apr 99
2
4
3
5
1
4
5
D930A051
2 45 18 510
Saab 900 M94-, Saab 9-3
1 Remove the tailgate release button.
2 Remove the cover on the opening handle and
unscrew the handle.
3 Remove the cover by the door mirror.
4 Remove the cover on the door pull.
5 Undo the screws securing the door trim.
6 Remove the trim by detaching the clips and
lifting it away from the lock button.
7 Separate the wiring harness at the door
grommet.
8 Detach the clip securing the wiring harness in
the door and pull out the round connector a
short way from the cable grommet.
9 Put the loudspeaker cables in place in the door
and insert the loose ends through the cable
grommet.
10 Connect the driver’s side loudspeaker cable as
follows:
YE/WH alternatively GY/WH - pin 19
OG/WH - pin 20
11 Fasten the wiring harness in the door with clips.
12 Make a hole for the loudspeaker in the water
barrier by tearing along the perforations.
13 Plug the connector to the loudspeaker.
14 Put the loudspeaker in place and tighten the
screws.
15 Cut a hole for the loudspeaker in the door trim.
16 Refit the door trim and tighten the screws.
17 Fit the passenger loudspeaker in the same way.
Connect the cables as follows:
GY - pin 19
BN/RD - pin 20
Important
Do not untwist the cables.
3
2
4
1
6
5
14
13
17
7
D930A053
45 18 510 3
Saab 900 M94-, Saab 9-3
18 Remove the lower dashboard panel on the driv-
er’s side.
19 Remove the screws securing the relay holder
and bend it to one side.
20 Lay the wiring harness for the driver’s loud-
speaker in place under the dashboard.
21 Insert the wiring harness through the grommet
in the drivers door and connect the leads as fol-
lows:
YE/WH - pin 19
OG/WH - pin 20
22 Connect the leads to the blue connector H33-3
as follows:
23 Secure the wiring harness with cable ties.
24 Remove the glove box.
25 Remove the side panel on the passenger side of
the centre console.
26 Insert the wiring harness through the grommet
in the passenger door and connect the leads as
follows:
GY - pin 19
BN/RD - pin 20
27 Secure the wiring harness to the dashboard
member with a cable tie.
900 9-3
YE/WH - pin 10 OG/WH - pin 25
OG/WH - pin 11 YE/WH - pin 26
GY - pin 30 GY - pin 28
BN/RD - pin 31 BN/RD - pin 29
24
24
18
D930A054
4 45 18 510
Saab 900 M94-, Saab 9-3
28 Put the amplifier bracket in place and screw it
tight.
29 Put the amplifier in place and tighten the screws
securing it to the bracket and the support.
30 Put the amplifier wiring harness in place under
the dashboard.
31 Plug in the wiring harness to the amplifier.
32 Plug in the DIN cable to the amplifier.
33 Lift out the radio from the dashboard and plug in
the DIN cable.
34 Connect the ground cable to grounding point
G34P on the A-pillar on the passenger side.
35 Connect the leads to the blue connector H33-3
as follows:
YE/WH - pin 10
OG/WH - pin 11
GY - pin 30
BN/RD - pin 31
36 Connect the power supply lead to fuse 25 in the
fuse holder.
37 Secure the wiring harness with cable ties.
38 Refit the side panel to the centre console.
39 Refit the glove box.
40 Refit the lower dashboard panel on the driver’s
side.
41 Refit the cover on the door pull.
42 Refit the cover by the door mirror.
43 Put the opening handle in place and screw it
tight.
44 Put the cover on the opening handle in place.
45 Put the tailgate release button in place.
31
29
29
32
34
28
G34 S/P
D930A052
45 18 510 5
Saab 900 M94-, Saab 9-3
Wiring diagram Saab 900 M94
6 45 18 510
Saab 900 M94-, Saab 9-3
Wiring diagram Saab 900 M95
0.5T2 BN/GY
BN
T9
1.0
1.0
T10
BN/WH
BNT1 0.5
BN/BK
T3 0.5
BN/RD
T4
0.5
BK/GNT12 1.0
1.0
T11
BK/WH
266FL
-
+
266FR
+
-
266RR
+
-
BK/WHT11 1.0
BK/GNT12
1.0
1.0
T10BN/WH
1.0T9 BN
266RL
-
+
(LHD) (RHD)
G34P G33P
4
H6-2
5
353
4
2143558
5
6
81327
7
55
1
0.5BK/WH
T13
1
(RHD)
YE/WHT5 1.0
(LHD)
GYT7 1.0
GYT7
1.0
H26-2
19
H26-4
20
(RHD)
1.0T8 BN/RD
(LHD)
OG/WHT6 1.0
266P/D
-
+
266D/P
+
-
26
(LHD)
(RHD)
OG/WHT6 1.0
+30
1.0
T6 OG/WH
9
22A
4
22A
G34P
W
2 1
2 1 4 3
354
13 BK
8BK
1.0
T8 BN/RD
J45
+X
CD
A-connector
375
1.0BU/RD
L30-1
L58-5
GY/WH 0.5
C58-8
GY/WH 1.0
+30
B-connector
+30
1.5BKT31
2.5BKT31-1
25
22A
T30 RD
2.5
T58
BU 1.0
BU/RDL30-1 1.0
540B
34
16
3
H6-5
1
0.5BK/WHT13
H33-1
1128
H10-4
8
0.75
BU/RDL30-3
T30-1 BU/RD 0.5
H2-43
2
30 11
H33-3
31
10
H26-1
19
YE/WHT5
1.0
1.0T5 YE/WH
1.0
T7 GY
1.0T6 OG/WH
BN/RDT8
1.0
1.0T8 BN/RD
GYT7 1.0
YE/WHT5 1.0
355
(LHD)
(RHD)
(LHD)
H26-3
20
(RHD)
(RHD)
(LHD)
24
H33-1
25 27
1.5
RD
T30-2
1.0
BUT56
A1 GY 0.5
I14-3 BU/OG 0.5
I40-3
BN/OG
0.5
X
Z
J54
X
Z
J55
I40-1 BN/OG 0.5
I14-1 BU/OG 0.5
0.5BU/OGI14-2
0.5BN/OGI40-2
541
17 16
15.01.96
dc13c95
RD
265
G27
BK
GN
13
45 18 510 7
Saab 900 M94-, Saab 9-3
Wiring diagram Saab 900 M96
72
4318
21436587
5
6
353
T30-2
RD
1.5
375
(RHD)
-+
266RL
+-
266RR
221196
dc13c96
(LHD)
1.0
0.75
T56
BU
0.75
GN
BK
G27
265
RD
BK/GNT12 1.0
(RHD)
(LHD)
(LHD)
(RHD)
(RHD)
(LHD)
H26-2
H26-1
OG/WHT6 1.0
BN/RDT8 1.0
1.0T5 YE/WH
1.0T7 GY
1.0
T8 BN/RD
20
266P/D
-+
2.5RDT30
1.0L30-1 BU/RD
T13
BK/WH
0.5
T31-1 BK 2.5
GYT7 1.0
BN/RDT8 1.0
YE/WHT5 1.0
1.0T6 OG/WH
YE/WHT5 1.0
1.0
T6 OG/WH
GYT7
1.0
2.5
V31-14
BK
T31
BK
1.5
I40-2 BN/OG 0.5
I14-2 BU/OG 0.5
0.5GY/WH
L58-5
0.5
BN/OG
I40-3
0.5BU/OG
I14-3
0.5
GY
A1
1.0
GY/WH
C58-8
1.0T9 BN
BN/WHT10 1.0
BNT1 0.5
0.5T2 BN/GY
0.5T3 BN/BK
0.5T4 BN/RD
1.0T12 BK/GN
BK/WHT11 1.01.0T11 BK/WH
BN/WHT10 1.0
1.0T9 BN
1.0
GY/WH
T58
L30-1
BU/RD
1.0
0.5
BU/RD
T30-3
266D/P
-+
113031
H33-3
19
H26-4
19
H26-3
20
+-
266FL
-+
266FR
H6-5
22a
22a
22a
(RHD)
J165
G33P
G34P
B-connector
+30
+30
8
H10-4
55
1
3
16
2811
H33-1
5
H6-2
CD
+X
J45
L30-3
BU/RD 0.75
BK8
BK13
G34P
13 11
25
1
2
H2-43
A-connector
(LHD)
+30
J55
J54
1617
541
262524
H33-1
27
10
2143
12
354
W
4
1.0T7 GY
1.0T5 YE/WH
BN/RDT8 1.0
OG/WHT6 1.0
(LHD)
(RHD)
(LHD)
(RHD)
(LHD)
(RHD)
T13
BK/WH
0.5
355
8 45 18 510
Saab 900 M94-, Saab 9-3
Wiring diagram Saab 900 M97
AUDIO II
(RHD)
(LHD)
25
T30 RD 2.5
354
21 34
12
W
8BK
1.0T8 BN/RD
1.0T6 OG/WH
YE/WHT5 1.0YE/WHT5 1.0
1.0T6 OG/WH
(LHD)
(RHD)
11 10 30
H33-3
31
2.5BKT31-1
1.0T7 GY
1.0
T8 BN/RD
1.0GYT7
1.0BN/RDT8
T5 YE/WH 1.0
1.0OG/WHT6
G34P
1.0T7 GY
20
266D
-+
266P
+-
20
H26-2
H26-4
19
(RHD)
(LHD)
H26-1
H26-3
19
(RHD)
(LHD)
+30
22a
970122
dc13c97
45 18 510 9
Saab 900 M94-, Saab 9-3
Wiring diagram Saab 9-3 M98
266P/D
-+
266RL
+-
266RR
-+
266D/P
+
-
266FL
-
+
266FR
+-
RC13C98
980212
RDT30-5 0.5
I-BUS
GN
2.5RD
T30
J77
22a
+30
25
G34P
(LHD)
(RHD)
H27-3
H27-2
2019
H27-1
H27-4
2019
25
T5
1.0YE/WH
T6
1.0OG/WH
GY 1.0
T7
T8
1.0BN/RD
T6
1.0OG/WH
T5
1.0YE/WH
T6 1.0OG/WH
BU/RD 1.0T8
YE/WH1.0T5
T7 1.0GY
BU/RD 1.0T8
OG/WH1.0T6
GY 1.0T7
YE/WH1.0T5
T7
1.0GY
T8
1.0BN/RD
8
J89
J50
(LHD)
(LHD)
(RHD)
(RHD)
(RHD)
(LHD) (RHD)
H33-3
29
(LHD)
(LHD)
(RHD)
P30-5
RD 2.5
P31-16
BK 6.0
P31-5
BK 4.0
(LHD)
(RHD)
2826
354
21
12
43
7
355
11 5
12
37826
8 5
321415 31
H33-3
33
J114
232221
H33-1
24 20
H33-3
24
G3
+30 +30
134
+15
24
J72
T17-1 0.5GN
BN 0.5T18-1
375
I-BUS
(CONV)
RD 0.5T30-5
BN 0.5T18
T19 0.5BU
T20 0.5RD RD 0.5T20-1
T19-1 0.5BU
GN 0.5T17
OG 0.5T26
T31-10 0.35BN/BK
(C)
T13-3 0.5BK/WH
T12-1 1.0BK/GN
BN/WH 1.0T10-1
T9-1 1.0BN
T30-3 BU/RD 1.0
T1-1 0.5BN
BN/WH 1.0T10
T12 1.0BK/GN
T9 1.0BN
BK/WH 1.0T11
P31-6
BK 4.0
GN
WH
0.5BK
T31-3
T13 0.5BK/WH
(B)
T15-1 0.75BN/RD
P30-18
RD 2.5
T30-6 1.5RD
BU/RD 1.0T30-3
BN/GY 0.5T2-1
(B)
G34P
T31-1 2.5BK
(C)
WH
(A)
(A)
(A)
(A) (A)
M
12
BK
RD
GN
G27
265
T11-1 1.0BK/WH
353
51
7
47
10 9 3
24 6 5 4 3
87218
8
3
T3-1 0.5BN/BK
BN/RD 0.5T4-1
T28 0.75RD/BN
BK 1.5T31-4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Saab 400 101 754 Installation Instructions Manual

Type
Installation Instructions Manual
This manual is also suitable for

Saab 400 101 754 is a door-mounted loudspeaker kit designed for use with Saab 900 M94- and Saab 9-3 vehicles. This kit includes all the necessary components to install a pair of loudspeakers in the front doors of your vehicle, providing you with an enhanced audio experience. The kit includes two loudspeakers, an amplifier, screws, a DIN cable, and a wiring harness. The loudspeakers are designed to fit into the factory speaker locations in the front doors, and the amplifier is designed to be mounted under the dashboard.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI