IDS Managed Switches CLI Reference Guide 20
Using the Command-Line Interface
PerleSwitch>? (User EXEC mode)
Exec commands:
clear Reset functions
enable Switch to privilege mode
exit exit from EXEC
help Description of the interactive help
login Login as a new user
logout Logout of current user
ping Send echo messages
show Display internal settings
ssh Open a secure shell client connection
systat Display information about terminal lines
telnet Open a telnet connection
terminal Set terminal characteristics
traceroute Trace route to destination
PerleSwitch>clear ? (User EXEC mode)
alert clear alert log
ip IP
PerleSwitch#? (Privilege EXEC mode)
archive Manage archive files
boot Modify system boot parameters
cd Change current directory
clear Reset functions
clock Manage system clock
configure Switch to (config)#
copy Copy from one file to another
debug Debugging functions (see also ’undebug’)
delete Delete a file
dir List files on a file system
disable Leave privileged mode
dot1x IEEE 802.1X Exec commands
erase Erase a file system
exit Exit from the EXEC
.........
PerleSwitch# boot ? (Privilege EXEC mode)
system System image file
PerleSwitch# boot system ?
backup Boot with a backup image?
PerleSwitch# boot system backup <cr>
PerleSwitch#configure <cr>
Configuring from terminal, memory, or network[terminal]? <cr>
PerleSwitch(config)# ((config)#)
PerleSwitch(config)#interface vlan 1<cr>
PerleSwitch(config-if)#(Config interface mode)