1
Table of Contents
SYMBOLS USED ON THE RECEIVER...................................................... 3
SAFETY INSTRUCTIONS.......................................................................... 4
I.GENERAL INFORMATION....................................................................... 5
1. Preface...............................................................................................5
2. Main Features....................................................................................5
3. General Operation of the Receiver ....................................................6
4. Package Contents..............................................................................6
5. Front Panel ........................................................................................7
6. Rear Panel.........................................................................................8
7. Remote Control Unit ..........................................................................9
8. Installation of STB............................................................................11
8.1 Connecting to a Television.......................................................11
8.2 Connecting to TV using YCbCr support...................................12
8.3 Connecting to another receiver................................................12
II. MENU STRUCTURE .............................................................................13
1. Program List.....................................................................................14
1.1 TV Program List.......................................................................14
1.2 Music Program List..................................................................15
1.3 Sort..........................................................................................15
2. Program Search...............................................................................15
2.1 Automatic Search.....................................................................15
2.2 Manual search .........................................................................16
3. System Setting.................................................................................16
3.1 Video Setup .............................................................................16
3.2 Advanced Setting.....................................................................16
3.3 Language.................................................................................17
3.4 Time Setting.............................................................................17
3.5 System Schedule.....................................................................17
2
4. Accessory.........................................................................................18
4.1 System Information..................................................................18
4.2 Factory Default.........................................................................18
4.3 System update.........................................................................18
5. Shortcut Key Functions....................................................................19
5.1 Electronic Program Guide (EPG).............................................19
5.2 Program List ............................................................................20
5.3 Audio Select.............................................................................20
5.4 Information...............................................................................20
5.5 Subtitle.....................................................................................20
III. TECHNICAL SPECIFICATION.............................................................21
IV. TROUBLE SHOOTING.........................................................................23
3
SYMBOLS USED ON THE RECEIVER
The next paragraphs explain the meaning of the symbols, present on the receiver.
The Digital Video Broadcasting logo.
A broadcast standard for digital radio and television using MPEG-2
compression.
The caution risk of electrical shock - do not open symbol
This symbol tells you that you are not allowed to open the receiver.
Only authorized (service) technicians are allowed to open the box.
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
4
SAFETY INSTRUCTIONS
Please read these safety instructions through carefully, before operating the receiver.
Please observe all warnings and instructions on the equipment and contained in these
operating instructions.
Be sure to read this user’s manual before starting your operation.
Never open the cover. It is very dangerous to touch the inside of the unit due to possible
electric shock.
Install the unit horizontally. Unbalanced installation may cause the unit to be damaged by
itself.
When you don’t use this unit for a long time, please pull the power cord from the outlet.
Also do not use a damaged power cord.
When the unit is suddenly moved to a hot area from a cold area, it may cause problems.
In that case, turn off the power, and turn on after 1-2 hours.
Do not touch the power with wet hand. If there is liquid flowing into the unit, pull out the
power cord immediately because it may cause fire or electric shock.
Install the unit in a place with:
good ventilation
suitable temperature
no direct sunrays
low humidity
low vibration influence
Place the unit in a well ventilated and no heat environment.
Do not put heavy objects on the unit.
5
I.GENERAL INFORMATION
1. Preface
The STB is a high quality digital terrestrial receiver that allows to enjoy all available
Free-to-Air digital channels in Australia. It is fully compliant with MPEG-2 and DVB-T
standards and includes an enhanced OSD and easy to use menu. Equipped with the
latest technology and design, your receiver offers reliable performance for your digital
life.
2. Main Features
Fully DVB-T & MPEG-2 Compliant
Software upgrade via RS-232 serial port
Multi-language Subtitle output supported
Multi-language OSD and friendly user menu
Aspect ratio 4:3 and 16:9
Multi-language Audio supported
1000 channels memory space
7 days Electronic Program Guide and Information Plate
256 bit (TRUE) colors on screen display (OSD) supported
Closed Caption
Auto program update
Timer function supported
Program parameters memorization when power-off
PAL supported
Automatic power on/off supported
6
Logical channel number (LCN) Supported
Signal level & quality indicator
Standby with low consumption
Time adjustment
3. General Operation of the Receiver
The everyday operation of your receiver is accessed via user friendly on screen
displays and menus. These menus can help you get the most from your STB,
guiding you through installation and channel manager with its various functions
to enhance your viewing pleasure. All functions can be accessed through the
Remote Control Unit and the front panel buttons provide access to many
functions. Please be aware that new software may change the functionality of
the receiver. Should you experience any difficulties with the operation of your
unit, please consult the relevant section of this manual or Trouble Shooting.
Alternatively call your dealer or a customer service adviser.
4. Package Contents
Before installation, please check the items of the package. The package should contain
the following items:
~ Standard Definition Digital Terrestrial TV Receiver x1
~ Remote control x1
~ AAA Battery for the remote control x2
~ User's Manual x1
~ AV Cable x1
7
5. Front Panel
STANDBY: Press to switch between operation and standby modes
MENU: Show the Main Menu and command box on the screen
OK: Execute the selected item in the menu
CH: When watching, change to the previous or next channel, or move to the
next higher or lower item in the menu.
VOL: When watching a channel, adjust the volume or move to the left or right item in
the menu.
8
6. Rear Panel
RS232: Connect to a PC or a pre-updated STB for software upgrade
ANT IN: Connect to a terrestrial antenna
LOOP OUT: Connect to another receiver (RF loop through output from digital tuner)
YCbCr: Component video output. Supports high definition output
L/R AUDIO: This socket outputs analog audio L/R signal.
COAXIAL: This socket connects to a coaxial socket on your surround sound
system.
VIDEO: This socket outputs composite video signal.
S-VIDEO: This socket outputs separate S-Video signal.
ON/OFF: Main power switch
9
7. Remote Control Unit
10
: Press to switch between Operation and Standby modes
: Press to temporarily cut off the sound
0-9 : Enter required numbers in the input box or select a channel to watch
RECALL: Press to switch back to previous channel
INFO : Show information of the current channel
MENU : Display the Main Menu on the screen
EXIT : Press to return to the previous menu or escape from the item
OK : Press to execute the selected item in the menu, or to confirm the desired
value in input mode.
: Move cursor up/down/left/right, Page up/down, Volume +/-
p- / p+: Press to move up/down a page in the channel list
TV/RADIO: Switch between TV and Radio modes
GUIDE : Display EPG (Electronic Program Guide) menu
FREEZE: Switch between Pause and Play
FAV: Display the favorite channel list
FORMAT: Invalidation
AUDIO : When watching a channel, press to switch the audio languages
SUB.T: Subtitle hotkey will select DVB bitmap type titles. Note that subtitles may not
always work as the broadcaster may not provide the service
TEXT: Press to enter teletext mode
ASPECT: Use this hotkey to select your television screen format. Continuously press
this button to toggle through the different modes.
11
8. Installation of STB
This section explains the installation of the receiver. Refer to the manuals
supplied with the equipment for the installation of outdoor equipment such as
your antenna. When adding new equipment, be sure to refer to the related parts
of the manual for the installation. The default output for your STB is Component
(Red, Green, Blue) and Composite AV (Yellow, Red, White) which is always on.
To use S-Video, first tune in all channels via Composite AV connected (refer to
page 15 for “Program search”) then to switch to S-Video by pressing TV/AV on
your remote.
8.1 Connecting to a Television
12
8.2 Connecting to TV using YCbCr support
8.3 Connecting to another receiver
NOTE: This connection figure is for reference only. Connectors on the rear panel may be
in different places or even be omitted due to different STB models.
13
II. MENU STRUCTURE
Open the main menu by pressing the MENU button.
Program List
TV Program List
Music Program List
Sort
Program Search
Automatic Search
Manual Search
System Setting
Video Setup
Advanced Setting
Language
Time Setting
System Schedule
Accessory
System Information
Factory Default
System update
Navigate with the arrow button and enter the submenus by pressing the “OK”
button. Enter the upper menu level, or exit the main menu by pressing the
“EXIT” button.
14
1. Program List
1.1 TV Program List
From the menu” TV Program List”, the user can rename, sort, lock and add
channels to “favorite”. Select the list you want to modify, the TV-list and press
the “OK” button.
Favorite
Move the selector to the “Favor”-column. Select
the channels you want to add as favourites by
pressing the “OK” button. The selected
favourite is marked with “
”.
In channel view mode, press the “FAV” button
to display the favourites.
Move
Select the channel that you want to move and
press OK key, the
icon appears. Move the
channel in the list with the
buttons. When
the channel is in its desired place, press the
“OK” button.
Del
Move the selector to the “Del”-column. Select
desired channel and press OK key. The
channels are marked with a “X” icon. If you
want to cancel this operation, please press OK
key again at this channel.
15
1.2 Music Program List
This has the same operation as the 1.1 TV Program List. Please refer to point
1.1 above.
1.3 Sort
The channels can be sorted in alphabetical
order, by channel number or channel ID. The
channel ID is assigned to each channel
according to the broadcast information. The
channel ID is different from the channel number.
Go to the sub-menu ”Sort” and select the
desired sorting method and press the
[OK]-button.
2. Program Search
Your STB has two ways to search for programs: Automatic Search and
Manual Search.
2.1 Automatic Search
After pressing OK Automatic Search will start,
the message "Do you want to erase your
previous channel list?" will be displayed.
- If you choose OK, system will start to search
for programs automatically
- Otherwise, select Exit
WARNING: Previous channel list will be erased
if you choose to use Automatic Search
16
2.2 Manual search
It’s possible to search for single transponders
with the “Manual Search”.
- Select the pre-defined channel frequency no.
by pressing the left or right arrow key then.
- Arrow down and select OK to start the search.
Once found it will be added to the channel list,
and the signal indication-bars will indicate a
percentage signal strength and quality.
3. System Setting
The settings for video, audio and time can be adjusted in the ”System Setting”
menu. The system timer can also be activated from this menu.
3.1 Video Setup
Display Type: Select the actual screen ratio of
the TV 16:9 for wide screen-TV and 4:3 for
traditional TV-format.
Video Output: Select YCbCr or S-Video.
3.2 Advanced Setting
LCN(LOGICAL CHANNEL NUMBER) : By pressing
keys, select the option to be ON or OFF. If it is
ON, then all the channels will be listed according to
their logical channel number.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
