WELLFOR 6028 User manual

Type
User manual

WELLFOR 6028 is a modern LED lighted mirror with advanced features that enhance your bathroom experience. It offers customizable lighting with adjustable brightness and color temperature, allowing you to create the perfect ambiance for your needs. The built-in anti-fog function ensures a clear reflection even after a hot shower, while the optional night light provides gentle illumination in low-light conditions. With its sleek design and easy installation, WELLFOR 6028 adds both style and functionality to your bathroom.

WELLFOR 6028 is a modern LED lighted mirror with advanced features that enhance your bathroom experience. It offers customizable lighting with adjustable brightness and color temperature, allowing you to create the perfect ambiance for your needs. The built-in anti-fog function ensures a clear reflection even after a hot shower, while the optional night light provides gentle illumination in low-light conditions. With its sleek design and easy installation, WELLFOR 6028 adds both style and functionality to your bathroom.

Installa�on and Opera�ng Manual
For customer support please call 206.809.0093 weekdays 9:00 to 6:00 PST, or by email: service@wellfor.com.For more information:
PAGE 1
www.wellfor.com
W
WARNING AND SAFETY INSTRUCTIONS
Before assembling your LED Lighted Mirror xture, please make sure that you carefully
read through this instrucon sheet, refer back to them during installaon to ensure
your produed safely and correctly. Keep these instrucons for future use.
WARNING Risk of Fire and Electric Shock
All ngs must be installed in accordance with current IEE wiring regulaons. If in
doubt, consult a quald electrician.
Switch o the electrical supply at the main circuit board BEFORE installaon and
maintenance.
Suitable for indoor use only. This product should be posioned well away from
curtains and fabrics. Never cover the mirror.
Regularly check the cord, the transformer and all other parts for damage. If any
part is damaged the product should not be used.
INSTALLATION SAFETY
Inspect the product immediately upon receipt for the transit damage or missing
parts. Handle the product with care and protect against knocks to all sides and
edges of the glass.
Ensure there are no hidden pipes or cables in the wall before drilling.
Wear suitable eye proton when drilling. Take care if drilling onled surfaces
in case the drill slips.
CAUTION
The light source of this product is non-changeable light diodes (LED). Do not
disassemble the product, as the light diodes can cause damage to the eyes.
NOTE: The important safeguards and instrucons that appear in this manual are not
meant to cover all possible condions and situaons that may occur. It must be
understood that common sense, cauon and care, are factors that can’t be built into
any product. These factors must be supplied by the person(s) caring for and operang
the xture. Do not install this xture in hazardous locaons.
For customer support please call 206.809.0093 weekdays 9:00 to 6:00 PST, or by email: service@wellfor.com.For more information:
PAGE 2
www.wellfor.com
INSTALLATION MANUAL
Measure the center of the holes
and mark the drilling locaons.
Ensure markings are leveled.
ry
1
2
Using a drill, make holes and
l with supplied wall plugs.
CHECK PRODUCT LIST AFTER
OPENING THE PACKAGE
TOOLS YOU MAY NEED
2
2
LED Lighted Mirror
Screw
Expansion Tube
Installaon Manual
--1pce
--6pcs
--6pcs
--1pce
For customer support please call 206.809.0093 weekdays 9:00 to 6:00 PST, or by email: service@wellfor.com.For more information:
PAGE 3
www.wellfor.com
We provide plug with mirrors.
Oponal to cut the plug directly and
connect to electrical wiring if using
wall switch.
ATTENTION: Please cut o the main
power supply before wiring!
4
3 Align the mounng bracket with
the wall plug hole and screw the
bracket to the wall.
Place the mirror against the
wall and slide down as shown
in image.
5
For customer support please call 206.809.0093 weekdays 9:00 to 6:00 PST, or by email: service@wellfor.com.For more information:
PAGE 4
www.wellfor.com
OPERATION INSTRUCTION
ON/OFF Funcon
Dimmer Funcon
An-Fog Funcon
Timer
ON/OFF bun
Short press and touch buon to turn on/o the mirror.
Buon turns white when connected to main supply & turns
to blue when o.
Long press buon to change color temperature.
Short press and touch buon to turn on/o the mirror.
Buon turns white when connected to main supply & turns
to blue when o.
Long press buon to change brightness.
Short press and touch buon to start defogging.
Buon turns white when connected to main supply & turns
to blue when o.
Note: Buon turns o aer a delay of 60 minutes.
A1 A2
Long press the A2 buon for 3 seconds to enter the 
adjustment mode. In this mode, short press A1 to decrease
& A2 to increase  Each short press will reduce or ascend
the value by one. Or you can choose a long press for quick
adjustment. Aer the “hour adjustment is completed, if
there is no more operan for 5 seconds, it will enter the
“minute” adjustment mode, whose adjustment opera is
the same as the “hour. And aer the “minute” adjustment
is nished, it will automacally return to the normal mode if
there is no operafor 5 seconds either.
Note: This product has  display & temperature display
funcn. 5 seconds for  display & 2 seconds will last for
temperature display. Each of them alternates. Remember to
adjust the r only aer turn o the mirror.
For customer support please call 206.809.0093 weekdays 9:00 to 6:00 PST, or by email: service@wellfor.com.For more information:
PAGE 5
www.wellfor.com
Night Light (For mirror with night light funcn only)
AFTERCARE INSTRUCTIONS
Clean usindry cloth only when turned o. Never use cleaning agents or
abrasive materials. Do not allow moisture to come into contact with lamp.
THANK YOU FOR YOUR SUPPORT.
We wish you have wonderful experience in our product. If you have any other needs
or queries, please feel free to contact us by email info@exbriteusa.com, and get
replies within 48 business hours.
Bright sensor
Night light ON/OFF switch for night light only
DO NOT cover the sensor on boom of the
mirror.
Night light will be auto-on/o according to the
brightness surrounding.
Oponal to stop night light funcon by tapping
the ON/OFF switch at the boom corner of the
mirror.
For customer support please call 206.809.0093 weekdays 9:00 to 6:00 PST, or by email: service@wellfor.com.For more information:
PAGE 6
www.wellfor.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

WELLFOR 6028 User manual

Type
User manual

WELLFOR 6028 is a modern LED lighted mirror with advanced features that enhance your bathroom experience. It offers customizable lighting with adjustable brightness and color temperature, allowing you to create the perfect ambiance for your needs. The built-in anti-fog function ensures a clear reflection even after a hot shower, while the optional night light provides gentle illumination in low-light conditions. With its sleek design and easy installation, WELLFOR 6028 adds both style and functionality to your bathroom.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI