2. OHLUX
  3. SQPA6009-A
SQPA6009-A

OHLUX SQPA6009-A User manual

  • Hello! I am an AI chatbot trained to assist you with the OHLUX SQPA6009-A User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Frequently Asked Questions:
Q: Can smart LED Bulb be used in sockets with dimmers?
A: No, this bulb is designed to be used in on/off sockets only. It is not suitable for any
dimmers.
Q: Can smart LED bulb be used in enclosed fixtures?
A: No, this bulb is not designed for fully enclosed fixtures.
Q: Can smart LED bulb be used outdoors?
A: No, this bulb is designed for indoor use only.
Q: Are these smart LED bulbs compatible with Philips Hue bridge or other smart lighting
hubs?
A: No, the smart LED bulb does not support hub connection. Hub is not necessary.
Q: Can smart LED bulb be used with a 5Ghz Wi-Fi network?
A: No, the smart LED bulb does not work with 5Ghz Wi-Fi network. It can only work with
2.4Ghz Wi-Fi network.
Q: Can smart LED bulb be connected to Alexa/Google Home directly?
A: No, the smart LED bulb can only connect to Alexa/Google Home via Smart Life app or
Tuya Smart app.
Q: Does this bulb work with iPhones and iPads?
A: Yes, you can use the Smart Life app, Amazon Alexa app, or Google Home app on your
iPhone or iPad to control the smart LED bulb.
Q: What are the minimum software/OS requirements?
A: The Smart Life app can operate with Android 4.1 and above and iOS 8.0 and above.
Q: Can I control the light when l’m not at home?
A: Yes, you can remotely control smart LED bulb via Smart Life app when you are not at
home, on condition that the smart LED bulb is not offline.
Q: How can I reset the smart LED bulb?
A: You can reset the smart LED bulb by turning it ON-OFF-ON-OFF-ON.
Q: During setup, I get a "couldn't connect" message, or nothing happens. What do l do?
A: Please reset the smart LED bulb and then go through the setup process again.
Q: Can I automate this smart LED bulb?
A: Yes, you can create an automation or a Tap-to-Run scenario in the Smart Life app to
automate the smart LED bulb.
Q: Does smart LED bulb work with IFTTT?
A: No, this smart LED bulb does not work with IFTTT.
Q: Does the smart LED bulb remember its settings after it is turned off?
A: Yes. The smart LED bulb will remember all settings until it is reset.
Q: Is there a limit that how many bulbs I can connect?
A: Theoretically there is not limit for Smart Life app to add devices, but it is actually limited
by your Wi-Fi router. If there are too many smart products to connect to Wi-Fi at home,
some products may has no no location or signal interference, resulting in connection
failure. The solution is to add another router or reduce the Wi-Fi connection of other smart
products.
Q: Can I use the smart LED bulb if there is not Wi-Fi network in my home?
A: Yes. First please find a 2.4Ghz Wi-Fi network to make smart LED bulb to Smart Life
app paired successfully. After both the phone and smart LED bulb are off Wi-Fi network for
5 minutes, you can still control smart LED bulb via Bluetooth function on the phone. But
the distance between the phone and smart LED bulb can not be beyond Bluetooth range.
/