Superior Life PQL-83685 User manual

Brand: Superior Life

Model: PQL-83685

Type: User manual

The Superior Life PQL-83685 is a versatile LED mini wall pack light fixture designed for both indoor and outdoor use in wet locations. It offers energy-efficient lighting with a choice of 12W or 25W power options and a CCT of 5000K. Installation requires a qualified electrician and involves connecting wires, attaching the fixture to a J-box, and replacing the lens and reflector. Proper grounding is crucial for personal safety. The fixture features 0-10V dimming capabilities, allowing for precise light control. It boasts a sleek design with a 4.3-inch by 2.

LED MINI WALL PACKS • 12W/25W

INSTALL INSTRUCTIONS

PREMIUM QUALITY LIGHTING® • www.PQLighting.com

Specifications subject to change without notice. Photos and line

drawings may not be to scale and are for general reference only.

PLEASE FIND A QUALIFIED ELECTRICIAN FOR INSTALLATION. Please read the instructions before you install and use the fixture. Retain for future

reference.

CAUTIONS & SAFETY INSTRUCTIONS

• This fixture should be installed or maintained in accordance with the National Electrical Code (NEC) and applicable local codes and ordinances by a

professional who is familiar with the construction and operation of the product and hazards involved.

• Proper grounding is required to insure personal safety. Carefully observe the correct grounding procedure under the installation section.

• Disconnect power before installing.

• Check that the voltage is compatible with the fixture driver, use approved connectors for all electrical connections.

• Review diagrams before beginning.

• Suitable for wet locations.

CLEANING & MAINTENANCE

• Disconnect power before servicing fixture.

• Allow fixture to cool before handling.

• Do not open fixture to clean or touch LED chips.

• Use non-abrasive glass cleaning solution to clean lens and housing.

!WARNING DISCONNECT POWER BEFORE INSTALLING OR SERVICING.

INSTALLATION INSTRUCTIONS

Tools needed: Phillips head screwdriver and electrical tools.

1. Turn o power before connecting wires.

2. Remove the lens by loosening the screws on each side (Fig. 1)

and remove the reflector by loosening the screws in the center.

(Fig. 2)

3. Knock out the appropriate holes on the back side with a drill

where necessary. (Fig. 3)

4. Pull the wire from the J-box through the center hole, and attach

the fixture to the J-box with proper screws. (Fig. 4) Apply silicone

sealant (not provided) to any mounting holes to prevent water

entry.

5. Refer to General Wiring Diagram: Connect Black to Line, White

to Neutral and Green to Ground. For 0-10V Dimming: Connect

Purple* to Dim (+) and Gray* to Dim (–). Note: For non-dimming

applications, cap the purple and gray dimming wires separately.

Failure to do so may cause malfunctioning and void warranty.

6. Replace the reflector and lens carefully by reversing procedure

used to remove it. (Fig. 5) Installation is complete.

LED

FIXTURE

LINE BLACK

NEUTRAL WHITE

GROUND GREEN

GENERAL WIRING DIAGRAM

Fig. 1 Fig. 2

Fig. 3

Fig. 4 Fig. 5

4.3”

2.9”

ø 0.85”

ø 0.36”

Photocell (If applicable)

DIM + PURPLE*

DIM – GRAY*

*Cap dimming leads

separately if unused.

Superior Life PQL-83685 User manual

Superior Life PQL-83685 User manual

Superior Life PQL-83685 User manual

Related papers

Other documents