aiwen NW-WL22012 Operating instructions

Installation Instruction for Item

WL22012

Please turn off power and read this instruction before installation,

changing the bulb or cleaning the fixture.

The installation must be handled by a qualified electrician with

license.

A. Fix the hanging plate(4) on the junction box with the screw (5).

B. Use the terminal cap (1) to connect the lamp body wire with the external

wire.

C. Use screws (7) to fix the lamp body (6) on the hanging plate(4).

D. Fix the glass (8) with the outer ring (9) of the lamp head.

E.Install the light source (not included).