Daikin BRP069C81 Wireless LAN adapter lets you connect your heat pump system to the Daikin Cloud via the internet. It allows you to control your heat pump system with the Daikin Residential Controller app. The adapter is compatible with specific Daikin indoor units, and it comes with everything you need for installation, including screws, an adapter holder, and a mounting template.
Daikin BRP069C81 Wireless LAN adapter lets you connect your heat pump system to the Daikin Cloud via the internet. It allows you to control your heat pump system with the Daikin Residential Controller app. The adapter is compatible with specific Daikin indoor units, and it comes with everything you need for installation, including screws, an adapter holder, and a mounting template.
Installer reference guide
Wireless LAN connecting adapter
BRP069C81
BRP069C82
Table of contents
Installer reference guide
2
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
Table of contents
1 About this document 3
2 Specific installer safety instructions 4
3 About the adapter 5
3.1 Components.................................................................................................................................................................... 5
3.2 Basic parameters............................................................................................................................................................. 5
3.3 Compatibility................................................................................................................................................................... 6
4 About the box 7
4.1 To unpack the adapter.................................................................................................................................................... 7
5 Installation 8
5.1 Precautions when installing the adapter........................................................................................................................ 8
5.2 Overview: Installation ..................................................................................................................................................... 8
5.3 Preparing the installation site......................................................................................................................................... 8
5.3.1 Installation site requirements ........................................................................................................................ 8
5.4 Connecting the electrical wiring..................................................................................................................................... 9
5.4.1 Overview of electrical connections................................................................................................................ 9
5.4.2 About connecting the electrical wiring.......................................................................................................... 9
5.4.3 Precautions when connecting the electrical wiring....................................................................................... 9
5.4.4 To connect the adapter with the unit............................................................................................................ 9
5.5 Closing the adapter......................................................................................................................................................... 10
5.5.1 To close the adapter....................................................................................................................................... 10
5.6 Mounting the adapter .................................................................................................................................................... 11
5.6.1 About mounting the adapter ......................................................................................................................... 11
5.6.2 To mount the adapter .................................................................................................................................... 11
5.7 Opening the adapter....................................................................................................................................................... 12
5.7.1 About opening the adapter............................................................................................................................ 12
5.7.2 To open the adapter....................................................................................................................................... 12
6 Starting up the system 14
7 Configuration 15
7.1 To install the Daikin Residential Controller application ................................................................................................. 15
7.2 To configure the adapter................................................................................................................................................ 15
8 Hand-over to the user 16
9 Troubleshooting 17
9.1 Overview: Troubleshooting ............................................................................................................................................ 17
9.1.1 Symptom: The LEDs do not turn on when the adapter is connected to the unit and the unit is powered
ON ................................................................................................................................................................... 17
9.1.2 Symptom: The adapter is NOT responding to interaction with the indoor unit........................................... 17
9.1.3 Symptom: Nothing happens when the adapter is in AP mode ..................................................................... 17
1 | About this document
Installer reference guide
3
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
1 About this document
Target audience
Authorised installers
Documentation set
This document is part of a documentation set. The complete set consists of:
▪General safety precautions:
-Safety instructions that you must read before installing
-Format: Paper (in the box of the indoor unit)
▪Installation manual:
-Installation instructions
-Format: Paper (supplied in the kit)
▪Installer reference guide:
-Installation instructions, configuration, application guidelines,…
-Format: Digital files on http://www.daikineurope.com/support-and-manuals/
product-information/
▪Declaration of conformity:
INFORMATION: Declaration of conformity
Hereby, Daikin Industries Czech Republic s.r.o. declares that the radio equipment
type BRP069C41 is in compliance with the Directive 2014/53/EU. The original
declaration of conformity is available from http://www.daikineurope.com/support-
and-manuals/product-information/.
INFORMATION
For details on specifications, setting methods, FAQ, troubleshooting tips and the
latest version of this manual, visit app.daikineurope.com.
Latest revisions of the supplied documentation may be available on the regional
Daikin website or via your dealer.
The original documentation is written in English. All other languages are
translations.
2 | Specific installer safety instructions
Installer reference guide
4
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
2 Specific installer safety instructions
Always observe the following safety instructions and regulations.
Installation (see "5Installation"[48])
DANGER: RISK OF ELECTROCUTION
▪Turn off the power supply before installing the adapter.
▪Do NOT handle the adapter with wet hands.
▪Do NOT let the adapter get wet.
▪Do NOT disassemble, modify or repair the adapter.
▪Grip the connector when disconnecting the connection cable.
▪Turn off the power supply in case the adapter gets damaged.
DANGER: RISK OF ELECTROCUTION
Do NOT turn on the power supply before you have connected the electrical wiring,
closed the adapter, and mounted it to the indoor unit.
DANGER: RISK OF ELECTROCUTION
Before opening the adapter, turn OFF the power to the indoor unit.
Hand over to the user (see "8Hand-over to the user"[416])
DANGER
▪Do not disassemble, modify, or repair the adapter. This can cause fire, electric
shock, or injury.
▪Do not allow the adapter to get wet or use it when bathing or doing similar
activities with water. This can cause electric shock or fire.
▪Do not use the adapter near medical equipment, or persons using cardiac
pacemakers or defibrillators. This can cause life-threatening electromagnetic
interference.
▪Do not use the adapter near auto-control equipment such as automatic doors or
fire alarm equipment. This can cause accidents due to erroneous equipment
behaviour.
▪In case of abnormal odour or sound, overheating, or smoke coming out of the
adapter, immediately disconnect the indoor unit from its power supply.
Otherwise, this can lead to fire or malfunction. If this happens, consult your
dealer.
▪In case you drop or damage the adapter, disconnect the indoor unit from its
power supply. Otherwise, this can lead to fire or malfunction. If this happens,
consult your dealer.
3 | About the adapter
Installer reference guide
5
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
3 About the adapter
Wireless LAN adapter to connect the heat pump system to the Daikin Cloud via the
internet, allowing for control of the heat pump system with the Daikin Residential
Controller app.
3.1 Components
a
b
c
d
e
aRUN lamp (orange). Lights when connecting to a router (wireless LAN access point).
bAP lamp
cSETUP button. Use when connecting to a router (wireless LAN access point).
dMODE button
ePOWER button. Turns the WLAN adapter ON/OFF when pressed.
3.2 Basic parameters
Parameter Value
Frequency range 2400MHz~2483.5MHz
Radio protocol IEEE 802.11b/g/n
Radio frequency channel 13ch
Output power 13dBm
Effective radiated power 15dBm (11b) / 14dBm (11g) / 14dBm
(11n)
Power supply DC 14V/ 16V / 100mA
3 | About the adapter
Installer reference guide
6
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
3.3 Compatibility
Make sure the indoor unit is compatible for use with the adapter. For the latest
details about installation of the adapter and applicable units, visit
app.daikineurope.com.
INFORMATION
Actual appearance of the indoor units may differ from the illustration.
FBA-A, ADEA-A, FDXM-F, FNA-A, FDA125A
FFA-A
FHA-A, FUA-A
FAA-A
FVA*A, AVA*A
BRP069C81
FDA200/250A
FCAG-B, FCAHG-H
BRP069C82
4 | About the box
Installer reference guide
7
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
4 About the box
4.1 To unpack the adapter
1Open the box.
2Take out the adapter.
3Separate the accessories.
ca db h
e f g i
aAdapter
bScrews (M3×8) for the adapter
cAdapter holder with double face tape
dMounting screws for the holder (M3×16)
eCable tie mounting
fCable tie
gConnection cable
hSerial number sticker (SSID, KEY, MAC)
iInstallation manual
5 | Installation
Installer reference guide
8
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
5 Installation
5.1 Precautions when installing the adapter
DANGER: RISK OF ELECTROCUTION
▪Turn off the power supply before installing the adapter.
▪Do NOT handle the adapter with wet hands.
▪Do NOT let the adapter get wet.
▪Do NOT disassemble, modify or repair the adapter.
▪Grip the connector when disconnecting the connection cable.
▪Turn off the power supply in case the adapter gets damaged.
5.2 Overview: Installation
The installation of the adapter consists of the following stages:
1Connecting the electrical wiring;
2Closing the adapter;
3Mounting the adapter to the unit.
INFORMATION
Where to connect the electrical wiring on the indoor unit, and where to mount the
adapter, depends on the type of indoor unit. For more information, see the
addendum book for optional equipment of the indoor unit.
5.3 Preparing the installation site
Do NOT install the unit in places often used as work place. In case of construction
works (e.g. grinding works) where a lot of dust is created, the unit MUST be
covered.
Choose an installation location with sufficient space for carrying the unit in and out
of the site.
5.3.1 Installation site requirements
The adapter is designed to be mounted to the indoor unit, in dry, indoor locations
only.
Do NOT install the adapter in the following places:
▪In places where it is exposed to direct sunlight.
▪In places where it is near a heat source.
▪In places where it is exposed to a source of steam.
▪In places where it is exposed to machine oil vapour.
5 | Installation
Installer reference guide
9
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
5.4 Connecting the electrical wiring
5.4.1 Overview of electrical connections
X50A
X35A
f
e
c
d
b
a
aWireless LAN adapter
bConnection cable
cPCB port X35A
dPCB port X50A
eIndoor unit PCB
fIndoor unit
5.4.2 About connecting the electrical wiring
Typical workflow
Connecting the electrical wiring typically consists of the following stages:
1Connecting one end of the connection cable to the indoor unit;
2Connecting the other end of the connection cable to the adapter.
5.4.3 Precautions when connecting the electrical wiring
INFORMATION
Also read the precautions and requirements in the following chapters:
▪General safety precautions
▪Preparation
DANGER: RISK OF ELECTROCUTION
Do NOT turn on the power supply before you have connected the electrical wiring,
closed the adapter, and mounted it to the indoor unit.
5.4.4 To connect the adapter with the unit
1Separate the upper casing from the lower casing.
5 | Installation
Installer reference guide
10
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
a
c
b
aUpper casing
bAdapter PCB
cLower casing
2Connect the indoor unit side connector to the indoor unit PCB port X35A and
X50A.
3Connect the adapter side connector to the adapter.
a
b
c
aIndoor unit side connector X35A
bIndoor unit side connector X50A
cAdapter side connector
4Fasten the cable and ensure strain relief.
a
aConnector
NOTICE
ALWAYS connect a wired or wireless remote controller (Example: BRC1H, BRC7),
otherwise the online controller will NOT operate.
INFORMATION
Provide strain relief at indoor unit side by using the cable tie and cable tie mounting
that are included as accessory.
5.5 Closing the adapter
5.5.1 To close the adapter
1Hook the front casing into the rear casing.
5 | Installation
Installer reference guide
11
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
2Insert the two screws from the accessory bag.
2×
NOTICE
After closing the adapter, check that the connection cable is securely fastened.
5.6 Mounting the adapter
5.6.1 About mounting the adapter
Use the adapter holder (accessory) to mount the adapter. There are 2 ways of
mounting the adapter holder:
▪Fixing the adapter holder to the surface using screws.
▪Fixing the adapter holder to the surface using double face tape.
5.6.2 To mount the adapter
NOTICE
▪If using double face tape for mounting, make sure that the part of the surface to
which you mount the holder is clean and degreased.
▪Make sure to mount the holder to the surface firmly, so that it can bear the
weight of the adapter.
INFORMATION
The exact location of the holder depends on the type of indoor unit. For more
information, visit app.daikineurope.com.
5 | Installation
Installer reference guide
12
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
When using screws
1Fix the adapter holder on the wall/surface with 2 screws M3×16 (accessory).
2Slide the adapter into the holder.
a
b
aScrew locations
bAdapter holder
When using double side tape
3Attach the double-sided tape to the adapter holder.
4With the tape, mount the holder to the surface.
5Slide the adapter into the holder.
a
b
aTape
bAdapter holder
5.7 Opening the adapter
5.7.1 About opening the adapter
The average installation procedure does NOT involve opening the adapter.
However, in case you do have to open it, follow below procedure.
DANGER: RISK OF ELECTROCUTION
Before opening the adapter, turn OFF the power to the indoor unit.
5.7.2 To open the adapter
1Remove the screws with a screwdriver.
2×
5 | Installation
Installer reference guide
13
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
2Unhook the front casing from the rear casing.
6 | Starting up the system
Installer reference guide
14
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
6 Starting up the system
The adapter gets its power from the indoor unit. For the adapter to function, make
sure it is connected to the indoor unit, and the indoor unit is powered on.
Turn on the power supply and check that the RUN lamp of the product blinks.
7 | Configuration
Installer reference guide
15
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
7 Configuration
The customer is responsible for providing:
▪Smartphone or tablet with minimum supported version of Android or iOS,
specified on app.daikineurope.com.
▪Internet line and communication device, such as a modem, router, etc.
▪Wireless LAN access point
▪Installed free Daikin Residential Controller application.
7.1 To install the Daikin Residential Controller application
1Open:
▪Google Play for appliances using Android.
▪App Store for appliances using iOS.
2Search for Daikin Residential Controller.
3Follow the directions on the screen to install.
7.2 To configure the adapter
Open the Daikin Residential Controller application on your smartphone or tablet PC
and follow the in-app instructions.
app.daikineurope.com
8 | Hand-over to the user
Installer reference guide
16
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
8 Hand-over to the user
After having installed and configured the adapter, hand over this installation
manual to the user and make him/her aware of the following safety precautions.
DANGER
▪Do not disassemble, modify, or repair the adapter. This can cause fire, electric
shock, or injury.
▪Do not allow the adapter to get wet or use it when bathing or doing similar
activities with water. This can cause electric shock or fire.
▪Do not use the adapter near medical equipment, or persons using cardiac
pacemakers or defibrillators. This can cause life-threatening electromagnetic
interference.
▪Do not use the adapter near auto-control equipment such as automatic doors or
fire alarm equipment. This can cause accidents due to erroneous equipment
behaviour.
▪In case of abnormal odour or sound, overheating, or smoke coming out of the
adapter, immediately disconnect the indoor unit from its power supply.
Otherwise, this can lead to fire or malfunction. If this happens, consult your
dealer.
▪In case you drop or damage the adapter, disconnect the indoor unit from its
power supply. Otherwise, this can lead to fire or malfunction. If this happens,
consult your dealer.
NOTICE
Do not use the adapter near microwave ovens. This can affect wireless LAN
communications.
9 | Troubleshooting
Installer reference guide
17
BRP069C81+2
Wireless LAN connecting adapter
4P650468-1 – 2021.02
9 Troubleshooting
9.1 Overview: Troubleshooting
This chapter describes what to do in case of problems. It contains information
about solving problems based on the symptoms listed below.
9.1.1 Symptom: The LEDs do not turn on when the adapter is connected to the unit and the unit
is powered ON
Possible causes Corrective action
The adapter is wired to the wrong
connectors on the indoor unit.
Make sure that the LAN adapter is
correctly connected to the indoor unit.
See the connection guidelines in the
indoor unit manual.
9.1.2 Symptom: The adapter is NOT responding to interaction with the indoor unit
Possible causes Corrective action
The connection cable to connect the
adapter to the indoor unit is
incompatible with the unit.
Make sure you are connected to a
compatible unit. Check the
compatibility of the indoor unit with the
adapter in the indoor unit manual
9.1.3 Symptom: Nothing happens when the adapter is in AP mode
Possible causes Corrective action
The firmware is corrupted. Contact your dealer to report the
firmware issue.
4P650468-1 2021.02
Copyright 2021 Daikin
Verantwortung für Energie und Umwelt
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
Daikin BRP069C81 Wireless LAN adapter lets you connect your heat pump system to the Daikin Cloud via the internet. It allows you to control your heat pump system with the Daikin Residential Controller app. The adapter is compatible with specific Daikin indoor units, and it comes with everything you need for installation, including screws, an adapter holder, and a mounting template.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Daikin BRP069C81 Installation guide
-
-
-
-
Daikin BRP069B41 Installation guide
-
-
-
-
-
