2. Omni
  3. M113IOT

Omni M113IOT User manual

  • Hello, I've reviewed the user manual for the Omni scooter IOT controller. This document details how to use the controller which uses 4G, GPS, and BLE5.2 to establish communication between your app and the scooter to remotely lock and unlock. The system uses QR code scans for unlocking and handles charging through an app. I am ready to answer your questions about the controller's features, usage, and requirements.
  • How does the scooter unlock?
    What smartphone requirements are needed
    How is the billing handled?
欧米智能
FCCCaution:
AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowing
twoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevice
mustacceptanyinterferencereceived,includinginterferencethatmaycauseundesired
operation.
OperationmanualforsharingscooterIOT
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
I.Productiondescription
ThisisaIOTcontrollerforsharingscooterwhichvia4G,GPS,BLE5.2to
setupcommunicationbetweenapptocontrolscooterlock/unlock.Cloud
serveraccountridingtimeandchargeautomatically.
II．APPinstalltionandlogin
1.Downloadapp.
2.RegistrationandLogin,whichneedtobedonewithnetwork，accountshouldbevalid
phonenumber。
3.Deposit，Tollcharge.
III．Lock/unlockmanual：
1.OpenBluetooth.
2.StartAPP,clickthemiddleQRcodebuttonbelowtheAPP.，enterintoQR
codescanpage，scantheQRcodeofIOTcontroller，IOTwillbeunlocked
automaticallywhenappsgetQRcodeinformations，thenenterintoriding
status。
3．Clicklockwhenridingisfinished，cloudserverwillstopIOTand
chargewhenreceivelockrequestfromIOT.
IV．IOTcontrollershouldworkwithsmartphone.Requirementsforsmartphone：
OverAndroid4.3，hardwaresupport4.0BLE,Optimalscreenresolution
1280x720；overIOS7.1，overiphone4s.
V．Introductionofappinterfaces
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
mainpage
ScanQRcodepage
Unlockingcarpage
Endsuccessfuldeductionpage
/