INSTRUCTIONS
©2017 Oatey SCS. All Rights Reserved.
This information is based on data believed to be reliable but Oatey makes no warranties, express or implied, as to its accuracy and assumes no liability arising out of its use. The data listed falls within the normal range of product properties but should not be used to
establish specication limits or used alone as the basis of design. Oatey’s liability to purchasers is expressly limited to the terms and conditions of sale. Oatey is a trademark of Oatey Co. All other trademarks can be found on www.oatey.com.
©2017 Oatey SCS. All Rights Reserved.
This information is based on data believed to be reliable but Oatey makes no warranties, express or implied, as to its accuracy and assumes no liability arising out of its use. The data listed falls within the normal range of product properties but should not be used to
establish specication limits or used alone as the basis of design. Oatey’s liability to purchasers is expressly limited to the terms and conditions of sale. Oatey is a trademark of Oatey Co. All other trademarks can be found on www.oatey.com.
DWV J-HOOK PIPE HANGER
GANCHO J PARA TUBERÍA DWV
• Supports DWV piping systems to joists and rafters
• Holds pipes rmly while allowing expansion and contraction
• Multiple nail holes for attachment at various angles for pipe runs
• Unique diagonal nail holes allow for easy attachment in tight areas
• Soporta sistemas de tubería de desagüe, ventilación y evacuación a vigas
y travesaños
• Sostiene tuberías rmemente a la vez que permite expansión y contracción
• Múltiples oricios para clavos para la jación de trayectos de tubería a
diferentes ángulos
• Posicionamiento especial diagonal de oricios para clavos facilita la jación
en áreas estrechas
Straight or
angle nail
mounting