ProFlex 3011HD-20C Installation guide

Brand
ProFlex
Model
3011HD-20C
Type
Installation guide

This manual is also suitable for

ProFlex
™
No-Dig Landscape Edging
Installation Guidelines
Dimex LLC » 28305 State Route 7 » Marietta, OH 45750 » 800.334.3776 » www.ezconnectedging.com
ProFlex No-Dig Landscape Edging is a fast, affordable
and easy way to define your landscape and garden areas
without the mess and hassle of digging. Proudly made in the
U.S.A. from recycled materials, ProFlex is flexible, durable,
and versatile enough for many landscape projects.
1
No digging required. Using a spade or shovel, clear
area where edging is to be placed of turf and debris. Place
edging on cleared surface with the anchoring tabs facing
toward the planting bed.
2
Hammer the included anchoring spikes through the tabs to
hold the edging in place. The maximum spacing of the spikes
is every 4 ft. If you desire additional anchoring, spike packs
are available separately.
3
When joining two pieces of ProFlex Edging, use the
included overlapping connector. It is designed to overlay on
the top of the end tab of each piece, so that when spiked,
it minimizes the gap between two pieces of edging. Make
sure you cut at the midpoint between the anchoring tabs for
best results. Cut edging with hand snips or a fine tooth saw.
Always take proper safety precautions when spiking and
cutting edging.
4
Backfill to the top of the edging with mulch or other
groundcover.
1
2
3
4
  • Page 1 1

ProFlex 3011HD-20C Installation guide

Brand
ProFlex
Model
3011HD-20C
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents