Way Basics WB-LITTER-3-NL Installation guide

Brand
Way Basics
Model
WB-LITTER-3-NL
Type
Installation guide

This manual is also suitable for

Help and Comments www.waybasics.com/contact
version 0418
CAUTION placing unit on its side or back
will compromise structural integrity. Use
right side up.
Important
5
21 3
6
Carefully remove the protective
layer leaving the 3M adhesive
on zBoard (adhesive shown
in yellow).
Assemble the Side zBoard to the Front
and Back zBoard as shown. Press firmly
to join adhesives to zBoards.
Place alignment pins in all
zBoards as shown.
4
THIS SIDE UP
18 Pins
1 Back zBoard
Adhesive tape on 3 sides
1 Top zBoard
1 Bottom zBoard
1 Front zBoard
Litter Mat
2 x Top zBoard Stopper
2 Side zBoards
Adhesive tape on 1 side
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
• When moving your Way Basics unit, lift from the bottom
• Indoor use only. Not in bathroom.
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
Included
CAT LITTER SIDE TABLE
Carefully flip assembled unit over.
Secure Litter Mat at entry.
Place Top zBoard on unit.
Enjoy building possibilities!
Align the Bottom zBoard to unit
as shown and press down firmly.
Align Top zBoard Stoppers to
Top zBoard and press down firmly.
  • Page 1 1

Way Basics WB-LITTER-3-NL Installation guide

Brand
Way Basics
Model
WB-LITTER-3-NL
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents