Way Basics WB-WINE-12-NL Installation guide

Brand
Way Basics
Model
WB-WINE-12-NL
Type
Installation guide
Help and Comments www.waybasics.com/contact
version 0418
CAUTION placing unit on its side or back
will compromise structural integrity. Use
right side up.
Important
THIS SIDE UP
5
3
6
4
Align vertical zBoards and back zBoard
to holes in the horizontal zBoard.
Align Top zBoard and press firmly
to secure unit together.
Connect the Diagonal zBoards.
12 Pins
2 Vertical zBoards
adhesive on 2 sides
1 Back zBoard
1 Top zBoard 1 Bottom zBoard
2 Diagonal zBoards
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
• When moving your Way Basics unit, lift from the bottom
• Indoor use only. Not in bathroom.
Included
WINE CUBE 12 BOTTLES
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
Position the Diagonal zBoards inside
the cube as shown.
Enjoy building possibilities!
2
1
Place alignment pins
in vertical zBoards and
back zBoard.
Carefully remove the protective
layer leaving the 3M adhesive
on zBoard (adhesive shown
in yellow).
  • Page 1 1

Way Basics WB-WINE-12-NL Installation guide

Brand
Way Basics
Model
WB-WINE-12-NL
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents