Cascadia T0305 Installation guide

Brand: Cascadia

Model: T0305

Type: Installation guide

Cascadia T0305 is a lighting fixture designed for indoor use. It requires assembly and installation before use. The fixture includes a mounting strap, mounting screws, a green grounding screw, wire nuts, a hex nut, a nipple, an end cap, and a washer. It is compatible with standard outlet boxes and requires a power source with black and white wires, as well as a house grounding wire. The fixture can accommodate multiple bulbs, but the maximum wattage is specified on the relamping label located on the socket area or packaging.

Cascadia T0305 is a lighting fixture designed for indoor use. It requires assembly and installation before use. The fixture includes a mounting strap, mounting screws, a green grounding screw, wire nuts, a hex nut, a nipple, an end cap, and a washer. It is compatible with standard outlet boxes and requires a power source with black and white wires, as well as a house grounding wire. The fixture can accommodate multiple bulbs, but the maximum wattage is specified on the relamping label located on the socket area or packaging.

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

161013

Wire Nut(D)

Mounting Screw(B)

Nipple(F)

Mounting Strap(A)

Green Grounding Screw(C)

Hex Nut(E)

Washer (H)

Outlet Box

House Grounding Wire

Fixture Grounding Wire

Ceiling Pan

Threaded Pipe

Socket

Bolt Nut

Fixture Light

End Cap (G)

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0305

Green Grounding

Screw (C)

Mounting Screw (B)

Wire Nut (D)

Hex Nut (E)

Nipple (F)

Mounting strap (A)

End Cap (G)

Hardware Package(inculded):

Washer (H)

1. Attach the Nipple to the mounting strap and

secure it with washer and hex nut.

2. Attach the mounting strap to the outlet box by

using two mounting screws.

3. Pull out the outlet wires and house grounding

wire from the outlet box. Make wire connections

using the wire nuts:

---The black wire from the fixture to the black

wire from the power source.

---The white wire from the fixture to the white

wire from the power source.

---Attach the fixture grounding wire to the

mounting strap with the green grounding

screw. Then connect it to the house grounding

wire with a wire nut.

Carefully put the wires back into the outlet box.

4. Attach the ceiling pan to the mounting strap by

inserting the nipple, then secure it with the end cap.

5.Install bulbs (not included). See relamping label on

socket area or packaging for maximum allowed wattage.

6. Attach the fixture light to the ceiling pan by inserting the

threaded pipe of ceiling pan, then tighten it with bolt nuts.

WARNING:

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box

Installation Steps

Turn on the power at fuse or circuit box

161013

Washer (H)

A

B

A: 14”

B: 8-3/4”

Spare Parts List:

Mounting Hardware

5633MM(1 SET)

Green Grounding

Screw (C)

Mounting Screw (B)

Wire Nut (D)

Hex Nut (E)

Nipple (F)

Mounting strap (A)

End Cap (G)

The following parts are available for re-order if damaged or missing.

1
2

Cascadia T0305 Installation guide

Brand: Cascadia

Model: T0305

Type: Installation guide

Cascadia T0305 is a lighting fixture designed for indoor use. It requires assembly and installation before use. The fixture includes a mounting strap, mounting screws, a green grounding screw, wire nuts, a hex nut, a nipple, an end cap, and a washer. It is compatible with standard outlet boxes and requires a power source with black and white wires, as well as a house grounding wire. The fixture can accommodate multiple bulbs, but the maximum wattage is specified on the relamping label located on the socket area or packaging.

Related papers

Other documents